Question about LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

1 Answer

Kenmore Ultra Wash Dishwasher - no lights, won't reset

I have a Kenmore Ultra Wash (18 months old), 655-13153k701. It will not turn on, no lights or anything. I tried pushing Heated Dry/Normal Wash sequence and nothing happened. I checked the breaker and that was ok. Any suggestions?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 51 Answers

Check wire nuts that were used to install power cord/it is on the right hand side of toe kick if ok there is a fuse on the control that you can replace located top of door

Posted on Sep 27, 2009

  • TamWin Nov 09, 2013

    do not see in the door schematic where that is and what the part numb er is

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore ultra wash 6651393 control lock light flashing


I would try turning the breaker off for 5 minutes to see if it will reset.

Jun 09, 2012 | Kenmore 15899 Built-in Dishwasher

1 Answer

My Kenmore Ultra wash dishwasher will not cycle.....the green clean light keeps flashing. How do I reset the cycle?


Hello & Welcome to FixYa

Flashing light is reset by pressing two buttons in sequence 3-4 times, to reset your dishwasher press these buttons in sequence:

High temp wash-heated dry-high temp wash-heated dry

Please get back to me if you have any other questions.

Kevin

Apr 11, 2011 | Kenmore Dishwashers

1 Answer

Normal wash light blinking, d/w wont start


Wish I could solve this, as I'm having the same problem too. Normal light blinks not matter which wash button is pressed. Cancel light will light, but still NOTHING happens. Same model as yours.

Jul 23, 2010 | Kenmore PRO 24 in BuiltIn Dishwasher with...

2 Answers

My Kenmore Ultra Wash Quiet Guard


take kick plate off get book out how to reset board

Apr 24, 2010 | Kenmore 15899 Built-in Dishwasher

1 Answer

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I suspect for either of these units that the timer control boards are bad.

Jan 24, 2009 | Dishwashers

2 Answers

Kenmore Ultra Wash Dishwasher Problem


there is no real way of checking the keypad. Not with a meter but if you push normal wash for example and it does not respond this usually means that you have a bad keypad

Nov 09, 2008 | Kenmore 15899 Built-in Dishwasher

1 Answer

Dishwasher won't start


Drhook65,
Welcome,
I'm Huuum

How old is this dishwasher and the complete model number is?
You said, you have a Kenmore Ultra Wash dishwasher, and you have power running to it, but when you shut the door on it...it still won't start a cycle. Does it have a reset button on it? Any ideas on a solution?

Yes, you may try this to reset the system.
Go to the breaker and switch it off for 5 minutes and the on and try it. It usually resets the systems.
Let me know ho it goes. Huuum
Do not forget to leave a rating.

Sep 24, 2008 | Kenmore 24 in. 15932 Built-in Dishwasher

1 Answer

KENMORE ULTRA WASH 1626


If the dishwasher doesn't sense a water temperature increase, it will stop working and lock the functions (clean light flashes 7 times, all buttons are non responsive). It does this as a safety in case the element is broken and feeding current into the water.

To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...

-high temp wash
-heated dry
-high temp wash
-heated dry

...all the lights will turn on briefly and the machine will start a diagnostic cycle. You can press cancel or let the diagnostic cyle finish (1-2 minutes).
You should now be able to run the dishwasher as normal.

If the issue returns, you could have a problem with the heating circuit (ie. element, thermostat or wiring). It rarely happens but it could also be the door switch not engaging properly when the door is closed (slightly bend the door latch down making sure it doesn't hit the door when you close it).

Nov 27, 2006 | Kenmore 24 in. 16262 Built-in Dishwasher

Not finding what you are looking for?
LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher Logo

1,530 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Dishwashers Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Mike

Level 3 Expert

4340 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a LG Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...