Question about NetGear RangeMax Next Wireless Router Bundle

1 Answer

Internet connection I recently set up a wireless connection to a 2nd desktop in my home using a Netgear Rangemax Next Wireless N router.  Everything worked well for a few days an then I started losing the net connection.  I was able to regain the connection by turning off power to the system at the surge protector for a few seconds.  The connection is maintained all day and the following morning I find that it has been lost and I repeat power off , power on to restart the connection. This has happened several mornings in a row after there has been no problem during the day before. No one has touched the system between the time there has been a connection and the time it is lost.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Contributor
  • 79 Answers
Re: internet connection

The problem may lie with your WiFi adapter on the 2nd computer.. these days NICs (adapters) have a Power Off capability and they will go to 'sleep' to save power.. you can try to resolve this through the Device Manager > Network Adapters > and the Properties of your WiFi adapter.. look for a tab on the Properties named Power Management..

Otherwise, it this is occuring on the WiFi Access Point, look for something in the interface to maintain Persistent Connections.. Since I do not use Netgear, I would have to find the manual to be sure.. but lets try the first option before we go on..

Posted on Dec 18, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a netgear rangemax due wireless n router. I had a friend, who is good with computers, set it up for me last april. he set it up through my desktop, which is connected directly to my broadband,...

These are some reasons why your new Hp laptop can't connect through your Netgear Router is because your Router has a security that used a password to connect to your router or the ip address of your desktop and Dell laptop is already setup to the router to work with internet.

You can learn how to setup your router easily.

Smart Wizard:

Netgear Data Sheet:

Here's the instruction how to access your Netgear Router (to change the settings and to allow your new Hp laptop to connect to the internet)

I suggest to use a password security, for easy connection of your computers

Jan 18, 2010 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

NetGear NETGEAR WNDR3300 RangeMax Dual Band router

The Netgear wireless router wireless settings need to be configured and the the wireless card in the computer and XBox needs to be configured with the Netgear wireless settings.
Follow these steps. : -
1. Connect the wireless router to your computer with a LAN cable.
2. Start your browser and enter the router's configuration URL
3. Enter the router setup login and password
4. Change the admin password
5. Go to the wireless settings and change the default SSID and turn off SSID broadcast.
6. Setup encryption key the strongest is WAP2
7. For further security measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router.
8. Record the settings you have made and keep it in a safe place and Save the settings.
9. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router.
10. Remove the LAN cable between the router and the computer then the computers should be able to connect to the router.

Oct 11, 2009 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

Connecting a router to a gateway

Sure, you just need to change the ip address of the Rangemax. Netgear usually uses for their router ip addresses. Plug the ethernet cable from your PC into the Rangemax. Open a web browser and put into the address bar. You should reach the home page of the Rangemax. Change it's ip address to and save.

Run an ethernet cable from one of the four ports in your Netgear gateway to the internet in port on your Rangemax and all should be well.

Jan 15, 2009 | NetGear RangeMax WPN824 Wireless Kit

1 Answer

Setting up Netgear Wireless-N router

try this plug up a line to laptop to modem to check to see if you can get connected if so then make sure you are on the same network and if so then call comcast to help you setup the laptop wireless settings in sound like the settings online doesn't have the laptop enable to accept the laptop

Dec 01, 2008 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

Cannot connect wireless device

If you have the correct wireless security and the laptop wont connect wirelessly, the best thing that you can do here is to access the router setup page and change some wireless settings on the router like the wireless channel , I advice you set the wireless channel to 11 then after that try to connect your laptop again to the wireless network and by the way change also the SSID or wireless network name of the router....

Nov 04, 2008 | NetGear RangeMax NEXT WNR834B Wireless...

1 Answer

Router won't log into it's IP address online

It appears to me that you have everything plugged into the desktop PC. This is not the way that it should be done. Plug the cable modem into the wireless router via the Internet/WAN port. Plug your desktop PC into one of the ports numbered 1-4. Now connect to the router via the wireless connection for the router and you should be able to now connect to the internet with your laptop.
If it still does not work, power down everything in this order: Laptop, Desktop, Router, Cable Modem. Bring everthing up in the reverse order (Cable Modem, Router, Desktop, Laptop) waiting for each device to stablize before moving to the next.
Once you get everything working, turn on your wireless security (WPA not WEP) asap to keep your computers and surfing safe, and to keep intruders off your network.

Jul 20, 2008 | NetGear RangeMax WPN824 Router

3 Answers

Netgear Firewall

with the router connected, open Internet Explorer and type after you log in there is a option on the left for firewall and you can turn it off. If it were me I would use the routers firewall over a software firewall though. By the time a software firewall detects a hack, its already in the PC.

May 19, 2008 | NetGear RangeMax WPN824 Wireless Router...

1 Answer

Server not found} NetGear WGR614 Wireless Router doesn't connect me to the internet.

Dear Loud Nouises,

Your router must be connected properly to the cable modem. This must be to the wan port on the router.

Next, the router must be set-up accordingly to recognize the modem's internet connections. Please ask for the IP address.. and other relevant informations from your internet provider.

Set -up your computer using the internet connections wizard on each of your respective computer.

This should work fine if all connections were correctly configured.


Nov 27, 2007 | NetGear WGR614 Wireless Router

1 Answer

Help with netgear rangemax next wireless n router

use the connected pc, its always best to use connected pc, then test using wireless laptops

Oct 18, 2007 | NetGear RANGEMAX WNR834M Router...

Not finding what you are looking for?
NetGear RangeMax Next Wireless Router Bundle Logo

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts


Level 1 Expert

31 Answers

 Mike M
Mike M

Level 3 Expert

3320 Answers


Level 1 Expert

36 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides