Question about Sony Cyber-shot DSC-T10 Digital Camera

2 Answers

Re-Sony DSCT-1 dear ... I have a sony camera DSCT-1 since 4 years yesterday i started to shot blurre or unclear , pictures as if the focus is not adjusted, i do not know what to do, i am in Canada , next to Montreal, in Vaudreil, can you advise me what to do? thanks Hanna

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Sony Master
  • 497 Answers
Re: Re-Sony DSCT-1

Refer this:

Posted on Jul 17, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 82 Answers
Re: Re-Sony DSCT-1

Disconnect, and then, after one minute, reconnect all power
sources and turn on the camera. If this does not work, press the
RESET button on the lower side of the control button using a
fine-tipped object, then turn on the power again. (All the
settings including date and time are cleared.)

If still does not resolve the issue, Turn off the camera, remove the battery pack. Allow the camera to remain without power for 30 seconds. Reinsert the the battery pack. Turn on the camera.

Posted on Apr 27, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Sony Cyber-shot takes lots of blurry pictures in

first thing you can do is to try reverting cam back to factory do that initialize the's under menu>setup settings>main settings1>initialize. after initializing,set cam to auto adjustment mode (green camera icon in mode dial). what to avoid when taking pictures:
1.subject too close (use macro if needed)
2.insufficient light
3.subject movement movement (that's caused by you)
5.incorrect camera setting
5.incorrect camera operation
btw, before you take a picture,press the shutter button halfway down first to give the cam ample time to'll see a flashing green indicator on the screen that means cam is focusing.when the indicator stops blinking cam is ready for the shutter button all the your picture.if still blurry, you may try changing iso (for dark or fast moving subject, note:the greater value the noisier the picture gets), metering mode and focus settings by going to the shooting menu (press menu when your in P or program mode). hope this helps.tnx:)

Apr 16, 2010 | Sony Cyber-shot DSC-S980 Digital Camera

1 Answer

Blurres LCD image and blurred photos

1 suspect dirt on the lens ensue the lens is cleaned with proper cloth and fluid.
2 suspect auto focus sensor is defective or blocked ensure the little windows on the front are clear and fingers do not cover them while taking pictures.

3 suspect camera is set in macro setting, Macro only has a depth of field of a few centimeters any subject outside this field will be out of focus but his may not be visible on the small viewing screen on the camera but becomes apparent when images are viewed at larger sizes.
change camera setting to landscape or portrait setting.

Nov 13, 2009 | Sony Cyber-Shot DSC-T1 Digital Camera

1 Answer

I'm not sure what settings are best? Mine come out blurred now..say for automatatic settings? Thanks

Set jog dial on auto (green mark), clean front lens of camera and check for clear and in focus view.
Still unclear picture then lens got bad and need qualified tech to fix it.

Aug 03, 2009 | Sony Cyber-shot DSC-W30 Digital Camera

2 Answers

Sony cyber-shot DSC-S500 will not focus

its common problem with lens....needs service which is not worthy

Apr 20, 2008 | Sony Cyber-Shot DSC-S500 Digital Camera

1 Answer

T20 camera start vibrating when switched on

The motor is shot, you will have to replace it. I would call sony and raise HE** will them, there are alot of these posts.

Mar 14, 2008 | Sony Cyber-shot DSC-T20 Digital Camera

1 Answer

Pre-shooting with sony dsc H2

There's a chance that the settings might have been changed.....Just try after resetting the camera to default factory settings.

Mar 05, 2008 | Sony Cyber-shot DSC-H2 Digital Camera

2 Answers

Regarding focus error on switching "on" camera

Hello, I have same problem with dsc-t10, when I open my camera than I found 3 motors, two of them on the right of the lens, these are to adjust the focus. One of them was broken.

Aug 16, 2007 | Sony Cyber-shot DSC-T10 Digital Camera

2 Answers

Sony cybershot DSC-T33

Depending on the age it may be replaceable- for free. This is a CCD issue which is know about. Get onto Sopny Technical Support by E-mail tell them all. Failing that its new camera time.

Jun 19, 2007 | Sony Cyber-Shot DSC-T33 Digital Camera

Not finding what you are looking for?
Sony Cyber-shot  DSC-T10 Digital Camera Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Digital Cameras Experts

Larry Spears
Larry Spears

Level 3 Expert

625 Answers

Vish Iyer
Vish Iyer

Level 2 Expert

74 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

Are you a Sony Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides