Question about Audio Players & Recorders

1 Answer

I have a Onkyo HT-S6100 sound system which has the HT-R667 receiver. I have a DirecTV dvr hooked up with hdmi, a PS4 hooked up with hdmi, and a Wii hooked up through component cables. The receiver is hooked up with with hdmi to the tv. The problem is that sometimes when I switch over to the PS3 or Wii, I will get audio without video. All I get on my tv is a no signal screen. My satellite, however, will always work. Also, this does not happen everytime and most of the time the video will eventually come on. I've tried resetting the system, but it eventually starts up again. Any solutions?

Posted by on

  • brett283 Sep 27, 2009

    Update: I tried the hdmi from the PS3 straight into the tv. It still didn't have video (though it would read it was hooked up). So I thought maybe it was a bad hdmi cable, but I checked the same cable coming out of the receiver to the tv. It worked that way. Then I took the cable originally going out of the receiver to the tv and hooked it up to the PS3. It worked going from the PS3 directly to the tv, but not from the PS3 to the receiver (still no video). Why would the first cord still work from the receiver to tv, but not the PS3 to tv?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

My HT-S6100 had a similar problem with my DVD player and some times with my Cable/DVR box. The signal wasn't getting received at the TV. So, first I changed the input jacks my DVD and Cable box are plugged into on the receiver (e.g. from HDMI 1 & HDMI 3 to HDMI 2 & HDMI 4). Second, I reprogrammed the Input Assignments to match (e.g. HDMI in 2&4). Third, I deleted any Input Assignments that weren't applicable. For instance, I'm only using HDMI connections, but there were Digital and Component Input Assignments programmed in. When I say I deleted them, I actually set them to "----" (just scroll through the options and you'll find this.) Finally, I turn on my video/audio sources (PS3 in your case) and let them load/warm up before I turn on my Onkyo receiver. It seems to be working. Good luck.

Posted on Mar 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why don't I have satellite picture.


You need to give more information. For instance, do you get a picture when using a DVD/BluRay player, Roku or gaming system of any kind? Are you connecting with HDMI , analog or optical?
Have you tried connecting your satellite receiver directly to your TV?
If so is there a picture and sound? If not it might be the satellite system.

Aug 24, 2014 | Onkyo receiver HT-R667 User Manual

1 Answer

I have purchase an onkyo HT-RC230 receiver. I want to connect a Directv R16-500 DVR & RCA L32W22 TV. Directv satelite service is currently connected to the DVR and DVR is connected composit S ports of ...


This is a rather uncomplicated satellite receiver, and basically only has a left/right audio out.
You can hook these into any of the stereo type inputs on the HT-RC230.
This receiver is also the "wal-mart" brand of Onkyo (not their best stuff) - so I suggest you take the L/R audio out on the DVR and put it into ANY available (cd/tape/dvd) stereo input on the receiver.
You aren't going to get better sound out of any specific input.

Feb 21, 2011 | Onkyo Audio Players & Recorders

1 Answer

I have an Onkyo HT-S6100 home theater not sending picture to TV.


I just fixed mine with the same problem. Apparently, the HT-R667 and 606 receiver that comes with 6100 has a problem with the HDMI board. Onkyo wanted $500 dollars to fix it, costed me $16. Here's how to fix it. http://www.highdefforum.com/high-definition-receivers-recorders-players-tivos/121956-repairing-onkyo-htr667-aka-606-a.html
and the youtube vid: http://www.youtube.com/watch?v=gj0x5S9ez5U
Good Luck!

Apr 04, 2010 | Onkyo TX-SR605 Receiver

2 Answers

Cable TV blinks on and off when connected to my Onkyo receiver.


I have the same problem.  It only occurs with my HD DVR (HDMI cable), not my blue ray (HDMI cable), or my xbox and wii (component video).  Video and audio cutout is random and drives the family nuts.  I am desperate for a solution.

Mar 21, 2010 | Audio Players & Recorders

1 Answer

I have just installed a HT-S6100 at home and works perfectly with a Blue Ray Samsung player (via HDMI). I also have a Sony DVD player with component cables I want to connect to my HT-S6100. I followed the...


There seems to be a lot of this type of lack of signal (video, audio or both) with this system. I have the same system and the same problem. Mine is working now. I'm using all HDMI connections. I think the other important thing to do is "delete" all Input Assignments that are not being used. By "delete" I mean set the Input Assignments to "----". Let me know if this helps.

Dec 14, 2009 | Onkyo HT-S5100 Theater System

2 Answers

Onkyo HT-S6100. Receiver says NO SIGNAL and so


I have the same exact unit and same exact problem. Any luck yet?

Oct 16, 2009 | Onkyo Audio Players & Recorders

1 Answer

Issues Displaying picture from HDMI upconversion


I've posted this other places. Hope it helps.

My HT-S6100 had a similar problem with my DVD player and some times with my Cable/DVR box. The signal wasn't getting received at the TV. So, first I changed the input jacks my DVD and Cable box are plugged into on the receiver (e.g. from HDMI 1 & HDMI 3 to HDMI 2 & HDMI 4). Second, I reprogrammed the Input Assignments to match (e.g. HDMI in 2&4). Third, I deleted any Input Assignments that weren't applicable. For instance, I'm only using HDMI connections, but there were Digital and Component Input Assignments programmed in. When I say I deleted them, I actually set them to "----" (just scroll through the options and you'll find this.) Finally, I turn on my video/audio sources (PS3 in your case) and let them load/warm up before I turn on my Onkyo receiver. It seems to be working. Good luck.

May 22, 2009 | Onkyo HT-S5100 Theater System

2 Answers

No surround sound from my PS3 through the Onkyo 5100. Video OK


Unfortunately only the higher end Onkyo Reciever pass audio over HDMI for sound. 605,705,805,905 exc. Your reciever will carry Video over HDMI but you will need a digital optical cable for sound.



thanks.

Jan 24, 2009 | Onkyo Audio Players & Recorders

1 Answer

Remote Control Not Communicating with TX-DS787


Hello, I am sorry about your issue. Your hook up should have nothing to do with the remote. You should get some functions like on/off, volume control. Thank you, Onkyo, USA

Apr 25, 2017 | Onkyo TX-DS787 Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

875 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

The Knight
The Knight

Level 3 Expert

74473 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...