Question about Canon PIXMA iP5300 InkJet Photo Printer

1 Answer

Ip 5300 error b200 10 blink orange-green

Canon IP 5300 error b200 10 blink orange- green

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 37 Answers

Try keeping the paper only in the bottom tray (there's a tray in the bottom) Try pulling any paper out of the top and just close that top tray. Open up the head so that u can see the ink cartridges and turn the printer on and off and maybe it will center itself again. If it's still not working (even if lights aren't red and print head wont align in the center) try manually moving the head back and forth like 18 times so you can lubricate that rail in the back that's holding it. After that, re-turn it off and on again.

Posted on Aug 02, 2010

  • ThriceAF Nov 04, 2010

    Well every advice is the same except a little altered (use a warm cotton swab to clean inside machine and on print head channels) but then it says if possible replace print head but honestly this has become a primitive Machine for turning humans into corpses - buy a new one.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ip 1880. green and orange light blink alternately but green stays longer at the third blink.cartridge also not moving. please help me.


try to reset ur printer. first off ur printer and take off the jack,just hold the grin light then plug the jack,and also hold the red light den move your fingers in the grin and red light

Feb 01, 2010 | Canon PIXMA iP1800 Printer

1 Answer

Ip 90


According to Canon, your ink cartridge has been installed incorrectly.

Feb 15, 2008 | Canon PIXMA iP90 Mobile Printer

1 Answer

My Canon pixma ip 4000 won´t print. The light at the turn on button blinks five times orange and then comes one green blink. I have tried to clean the print head but that didn´t change anything....


this indicates a the print head is not installed correctly or is faulty.

if the green and orange is alternating 5 times then it is caused by the sheet feeder.

Dec 08, 2009 | Canon PIXMA iP4000 InkJet Photo Printer

1 Answer

Ip 2000 on button flashes green then orange ,


Needs resetting at best.....perhaps it might shut down completely.....I had the same problem then my printer completely shut down!

Nov 08, 2009 | Canon PIXMA iP2000 InkJet Printer

1 Answer

Canon pixma ip 3000 error message printer is offline


If the orange lamp blinking only it's the print head is not installed, or it is not properly installed.Open the cover remove the print cartridges then remove the print head and put back it on.If not help the print head is defective and need replace.
If the orange lamp blinking with green alternately it's ASF (cam) sensor error.The problem is in sheet feed unit.

Oct 15, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

3 Answers

Why flash by 5 times the orange led?


Probably your waste ink counter should be cleaned or replaced before resetting but usually you can get away with resetting once.
1. Start with printer OFF
2. Hold down RESUME and then hold down POWER
3. Release RESUME
4. press RESUME twice, then release POWER
5. let green light blink until printhead has finished moving.
6. Select functions below with RESUME, execute with POWER

0 presses - green light - Test Print (exit service for i960)
1 press - orange light - EEPROM info print
2 presses - green light - EEPROM initialise
3 presses - orange light - reset waste ink counter.

This also applies to the i550, i560, i950, i960

Good Luck, I hope this helps?!

Aug 12, 2009 | Canon PIXMA iP5300 InkJet Photo Printer

1 Answer

Ip 4200 blinks 5 times


This error is the print head is not installed
[1401], or it is not properly
installed (Print head temperature
sensor error [1403] / Faulty
EEPROM data of the print head
[1405]).

Feb 06, 2009 | Canon PIXMA iP4200 InkJet Photo Printer

2 Answers

Canon pixma ip1300 initialisation problem


I have a canon ip 1300 produces an error(both LED's are alternately blinking one blink for the green led and 5 blink from the orange led) then it will produce an error 5600.

Dec 03, 2008 | Office Equipment & Supplies

3 Answers

Service error in canon pixma ip 1200??


Hello,My problem its Pixma IP 1200 for Windows Vista PLZ Help!!!

Jun 16, 2008 | Canon PIXMA iP4000 InkJet Photo Printer

5 Answers

Question for canon pixma iP 1000


folow these steps to reset it..
Step 1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

Nov 02, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Canon PIXMA iP5300 InkJet Photo Printer Logo

2,836 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

2005 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...