Question about Cyberhome DVR 1600 DVD Recorder

1 Answer

When recording the dvd player pauses all by its self then wont record

Every time i try to record on my dvd-r recorder the player will pause all by its self then will stop recording ive had it for a year and never tried to record untill recently and now i cant

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Hi,

It might be possible to update the firmware via CD, which may be able to get around certain hardware issues, however I doubt whether it will fix the problem. I have a lot of experience with these units, and in most cases it ends up being the laser or the laser main/driver board. If you know of anyone that can re-work the surface mount componentry, it is worth a try. If these options are not available to you and your unit is out of warranty, it is a throwaway job or sell on internet as faulty. Hope this helps...

ST

Posted on Dec 18, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alesis masterlink ml-9600 pauses during recording


  • alesis support
  • from what i can see about the device firmware update is probably what it needs...
  • Alesis Update
  • there address and phone is in top link.....sorry cant get much information from the company with out an account...

Nov 11, 2013 | Alesis MasterLink ML-9600

7 Answers

VRD-MC5


chak the power code if its ok then chak the tansformer of your dvd plyer

Sep 22, 2008 | Sony DVDirect VRD-MC3 DVD Recorder

1 Answer

I just bought the zv427mg9 a and I can not get it to pause recording when recording from vhs to dvd. Can you help?


the magnavox ZV427MG9 vhs to disc dub recording can not
be paused. you can not pause and start dub recording in this
mode. you must let it run start to finish . It also states this
in the manual which disspointing....
For this type of recorder it should be able
to do just that, pause while dub recording whs to disc, but it
doesn't.....

Aug 22, 2010 | Philips Magnavox DVD+R/+RW Recorder/VCR

1 Answer

How can I "PAUSE" while Copying from HDD to DVD on my Panasonic DMR-EX85 recorder?


Hi, Assuming the unit behaves much like a VCR-VCR dubbing setup you may be able to pause the DVD recordig on the fly simply by making sure the function is set to DVD and pressing PAUSE to start/stop recording
Hope this helps

Mar 21, 2010 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

HOW DO YOU BURN A DVD ON A SONY DVD RECORDER RDR


Make sure your Sony input signal is on L1 or L3 (the inputs in back of recorder) or on L2 which is for inputs for cameras(located in front).Once you get a signal, you're where you need to be. Choose your recording mode for recording speed (pull down the flap on the remote control for this button and also the input button).
Choose from between1 hour and six hours. To archive really important stuff, stick with the first 3 speeds. TV recording can be on 3, 4 or 6 hour mode.
Push the record/pause button once. This will put the recorder into the record/pause mode and then it awaits you pushing it again to start recording immediately. Just pushing record will force the machine into a 3 to five second delay before actually recording anything so you might mess up and miss the first few seconds of your input. Suggest you use a dvr-rw or dvd+rw to practice on.

When your recording is done, just push the pause again. It stops recording but allows you to add more on to the first recording without starting a new chapter if you want. Just continue to release the pause button to continue.
If you are satisfied that you are finished, then push the pause button to stop recording. Wait for the info to be written(flashing message on screen). When it stops, you may play the dvd.
Notice- since the dvd has not been FINALIZED, you may only play it back on this unit without finalizing. It will not play on other dvd players unless you finalize it first.
To finalize, look on remote for the TOOL button. Press it once. Now push DISC INFO once. Use arrow keys and enter button on remote for the following. Scroll down to FINALIZE and press enter.
Use arrow keys to scroll to OK. push the ENTER button. Finalizing should take between 30 seconds and 2 minutes.

Warning- if titles or chapters are to typed in, it must be done BEFORE finalizing. Finalizing afterwards cannot be done.
Erasing can be done in part or all if using an RW+ or RW- disc

Dave
azsnoopy1@cox.net

Nov 19, 2009 | Sony RDR-GX300 DVD Recorder

2 Answers

Magnavox ZV450MW8A DVD/VCR Recorder Dubbing.


I bought a ;magnavox dvd disc and cassette recorder combo.
I am having trouble with setup items? I get nothing on the screen to select from?

Oct 24, 2009 | Televison & Video

1 Answer

Dubbing from vcr to vcr


Connect with RCA cable to RCA jacks\plugs::
output [player] audio to INPUT [recorder]
OUTPUT [player] Video to INPUT [recorder]
*************************************************
Place blank tape in RECORDER, Tape that you want to record from into PLAYER.Press Record [recorder machine], wait one second, press PAUSE.( thats to give record tape "breathing" space.) Set up your player tape to start playing. When you know what you want to record, press PAUSE again to begining recording. Press PAUSE after the recorded section to install 2nd tape, etc. etc.
NOTE:: some VCRs use PAUSE 2nd time to release and continue recording, while some machines you must press RECORD button again to release PAUSE. you must expirement before begining your project.

May 24, 2008 | Zenith VCS442 VHS VCR

2 Answers

Pause Protected


dbronx,
You might try unplugging the unit for several minutes in an attempt to reset the logics from ROM... TruTech is just one of those WallyWorld/Target specials that have very little support and breakdown frequently.. If I might suggest, it sounds as though you haven't had this unit long - take it back and get your money for it and go out and get a major player in the market. At least when it breaks you can more easily get some support...
A lot of these off-brands we get in here for repair just aren't worth the time and effort to repair and you would be surprised how many brands there are...
Bill

Nov 16, 2007 | TruTech T650-DR DVD Recorder

Not finding what you are looking for?
Cyberhome DVR 1600 DVD Recorder Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cyberhome Televison & Video Experts

zappal

Level 2 Expert

256 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

509 Answers

The Knight
The Knight

Level 3 Expert

76001 Answers

Are you a Cyberhome Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...