Question about BenQ FP731 17" LCD Monitor

1 Answer

Computer when my computer start than i can't get windows start manu bar,i watach pentnium full icon, i avoid this situation but i could not do this system?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: computer

Dewang LCD accessories This replaces the board is FP71G (motherboard connects above liquid crystal screen is a row of line, row of wide 30PIN, the white FFC line) The customer purchases this power panel not to have to look the machine model, needs to disassemble the machine to look the motherboard connects above the liquid crystal screen is several row of lines. A row: FP71G machine. Two rows: FP71G+. A line: M170EP01 This board until now had above a year from the sale. The board quality obtains the full affirmation and the customer approval. Until now has not had repairs a second time the board. Maintenance way: This board for brand-new replaces the time which the board, this company produces goods can test, tests OK on the packing to deliver goods, if the customer receives the board to appear cannot use or for one month has the damage, this company free maintenance. The maintenance period transport expense voluntarily undertake by the buyer. Commodity name: The bright base liquid-crystal display replaces the high clamp + power panel specification: Four lamps small mouths + power panel Supports bright base FP71G, FP71G+ FP71GX and so on, thoroughly processes the good bright base liquid-crystal display black screen breakdown, this board maintains for a month, brand-new board, FP71G FP71G+ FP71GX FP737S (screen model: M170EP01) Ming Jihen multi- liquid-crystal display power panel type, purchase time best please pat a picture we to look, in order to avoid makes a mistake the goods Note: This board is the bright base liquid-crystal display replaces the board, the non- original factory board, the bolt hole site is dissimilar, when the time comes asks customer to fix inside the machine, does not need the wiring, this company already completed the connection motherboard plug, the attention: Nearby the original installation power panel power source plug has a fixed Zhuang-zi to be able to short-circuit, please presses him evenly, other places cannot short-circuit. Installed may, brightness and the original factory board was nearly equally bright.
Asks front which the customer purchases to send the information to my mailbox: Indicates your board and the machine model, is best can pat a your bad board the picture. Thanks! Mailbox address: Address: The Chinese Guangdong Province Dongguan city pond mansion town lotus lake district is bright and the computer market A2092 room telephone: 86-0769-82077079 8772017413728205959 contact people: Ancient gentleman

Вспомогательное оборудование Dewang lcd это заменяет ть доску будет FP71G (motherboard соединяется над жидкостным crystal экраном будет рядком линии, рядком широкие 30PIN, белой линией FFC) покупкы клиента эта панель силы, котор нужно посмотреть модель машины, потребности демонтировать машину для того чтобы посмотреть motherboard соединяется над жидкостным crystal экраном несколько рядок линий. Рядок: Машина FP71G. 2 рядка: FP71G+. Линия: M170EP01 Адрес: Китайское заречье озера лотоса городка хором пруда города Dongguan провинции Guangdong будет ярко и комнаты рынка компьютера A2092 телефон: 86-0769-82077079 8772017413728205959 свяжутся люди: Стародедовский джентльмен

Posted on Apr 01, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I bough the LCD model VA2231w- LED every time I turn it on then it pop up that change the resoluyion to 1920/ 1080P I don't know how to do it. So please help. Thanks Thai Nguyen

This would be the Native resolution. That your display functions and displays best in.
Windows XP, Vista and Windows 7.
(1) RIGHT mouse click over your desktop.
Windows XP will differ - but same basic idea to navigate and make this fix.
Pictures show from a Windows Vista Machine (extremely similar to Windows 7)
(2) Click Display settings
(3) Now you'll see a slider bar, Native Computer Display 1680x1050 resolution.
Some computers can not support this resolution and may cause non operational situations.
If the display setting is not on the slider bar. Chances would be that it's not a supported Resolution.
"Older computer" If the display doesn't show while trying different resolutions - do not click apply and wait. the screen will return to it's previous setting. ViewSonic VX2235 has a Setting that could be used to Disable this annoying message - Revert to ViewSonic lightdark_2.jpg

Nov 15, 2010 | ViewSonic VX2235WM Monitor

2 Answers

Icons are blurry

Did it happen all of a sudden? In other words, was it OK before?

Try going to screen preferences, settings, and look at the resolution slider - is it set to the native resolution of your monitor (1280x1024)? If not, correct and accept changes.

If the resolution is set OK, then multiple other things might have happened, but not knowing a bit more about the situation it's hard to advise anything...

Nov 08, 2009 | Samsung SyncMaster 931B 19" LCD Monitor

1 Answer

Black task bars

I would recommend you to install a application called TuneUp utilities which is a awesome software to restore your taskbars, broken desktops and missing files in windows operating system. Dont worry all your icons would be restored.

Sep 18, 2009 | HP Compaq FS7600 17" CRT Monitor

1 Answer

Just set up monitor after we moved. The fonts on microsoft features are now small. Attempt to change font size (on control panel) are not successful. example of "features" = task bar words very small,...

anywhere on the desktop(not over an icon or folder) right click on the mouse and go to properties. A window called display properties will come up. On th tabs at the top click on settings.
There will be a slider bar called screen resolution, move the slider down and the windows icons and folders and fonts will get larger adjust this and keep clicking apply until it was the same size previously

Aug 22, 2009 | Acer Computer Monitors

1 Answer

Start Task bar not showing

Press the Windows key to open the Start menu, then right-click the start button and choose properties.

Next, go to the task bar tab and
1. Uncheck auto-hide
2. Check keep task bar on top of other windows

Dec 11, 2008 | Computer Monitors

1 Answer

Display not centered

there are 6 buttons at the buttom of the monitor.
option 1). press the auto adjust.
option 2). from the right to left: "power","LED","Manu/enter",">"," <" ,"auto adjust"
to adjust the screen:
press manu-button, use <> button to navigate to the 3rd button on the top row.
(4way arrow). press manu again. that is going to get you into the submanu.again use the <> to navigate to H. Postion button.use the <> to mve the screen to the desire postion.
press manu again and select the right button on the button row (exit) and press manu.

Nov 06, 2008 | Envision EN-7220 17" Flat Panel LCD...

1 Answer


Windows doesn't know your display is broken as it see's your display adapter for the laptop. By adding the monitor windows is adding a second display to the one you don't actually have, your icons and start bar are still on display 1

Sep 28, 2008 | Computer Monitors

Not finding what you are looking for?
BenQ FP731 17" LCD Monitor Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Computer Monitors Experts


Level 3 Expert

2598 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a BenQ Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides