Question about One For All URC-1050 Remote Control

2 Answers

Need TV codes

Have an One For All "Access 4" remote. The back panel says URC-4700800 or 4700B00. Not sure if 5th digit is a 8 or B! Please help...was changing out batteries.

Posted by on

  • 5 more comments 
  • tadpole02 Feb 28, 2008

    i need the codes to set my tv i have an one for all access 4 remote control

  • Anonymous Mar 10, 2008

    i need the codes for DVD player

    for the URC-4700Boo remote

  • coottiecat Mar 10, 2008

    i need the code for a Phillips DVD player on a URC-4700B00 remote

  • xxissyxx Mar 14, 2008

    i need code for beko tv

  • Anonymous Oct 26, 2008

    need code for Phillips TV

  • losreipd1 Dec 04, 2008

    I too was changing batteries

  • surajitamrit Mar 22, 2009

    I have an access 4 one forall remote control URC-4700B00 and I need to know how to use it to get the codes for a Sony Trinitron TV

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 129 Answers

Hello, follow this link to download the manual and the codes for your remotes:
http://www.ofausa.com/remote.php?type=URC4700
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
Mark
(www.sparky-uk.com)

Posted on Dec 21, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Allo j,ai besoin le code pour sanyo television

Posted on Mar 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Total Control Universal Remote. URC 4140. What is the 4 digit code to operate the above TV


Search Results

    [PDF]Total Control URC-4140 - Universal Remote Control Codes

    www.remotecodelist.com/remotes/URC_4140_B00_and_B01.pdf
    UNIVERSAL. Remote control. URC - 4140 ... Your TOTAL CONTROL can operate four devices: a Television, ... The TV, VCR/DVD, SAT and AUX keys select the device.... 4. Enter your four-digit code using the number keys. The red light will blink twice.... To set up your other devices, follow the same instructions above, only.

    Universal Remote Control Codes

    www.remotecodelist.com/
    Codes and links for a number of universal remote controls, including Sony, RCA, ... GE Remote Codes, General instructions for GE Universal 3 and 4 digit remote controls. ... This manual may work for a number of Philips-Magnavox remotes. ... Total Control URC-4140, PDF Instruction Manual (remote also known as Crest .

Jan 13, 2016 | Sanyo 42 in. LCD TV

1 Answer

NEED SET UP CODE FOR A "ONE-FOR-ALL UNIVERSAL REMOTE (4 DIGIT) REMOTE # URC-1056 1303...TV PLDE3992A TV IS PROSCAN


Check these codes. 0009 0186 0217 0206 0163. If you wish to get more codes, check this link.

Feb 12, 2013 | Televison & Video

1 Answer

How do I play regional dvd's that the player is not tuned to. I have been trying to find a code but I am struggling. Can you help me?


Hi
You need to follow these instructions.


To unlock the Region Code on a Panasonic DMR EZ48 using a One for All - URC 7040



1. Switch on the player (make sure the drive select is DVD).
2. Select DVD on the URC.
3. Hold the magic button on the URC until the DVD button on the URC blinks twice
4. Enter device code 0490 on the URC, (DVD button blinks twice), URC takes control of the Player.

Point the URC at the Player and program the URC buttons using the following procedure:

1. Hold magic button until the DVD button on the URC blinks twice
2. Press 994 (DVD button blinks twice)
3. Briefly press magic.
4. Enter 4 digit code 1911 (DVD button on URC blinks twice)
5. Repeat steps 1, 2 & 3
6. Enter 4 digit code 1202 (DVD button on URC blinks twice)
7. Repeat steps 1, 2 & 3
8. Enter 4 digit code 0653 (DVD button on URC blinks twice)
9. Repeat steps 1, 2 & 3
10. Enter 4 digit code 1804 (DVD button on URC blinks twice)
11. Repeat steps 1, 2 & 3
12. Enter 4 digit code 1435 (DVD button on URC blinks twice)
13. Repeat steps 1, 2 & 3
14. Enter 4 digit code 1556 (DVD button on URC blinks twice)
15. Repeat steps 1, 2 & 3
16. Enter 4 digit code 1227 (DVD button on URC blinks twice)
17. Repeat steps 1, 2 & 3
18. Enter 4 digit code 1178 (DVD button on URC blinks twice)
19. Repeat steps 1, 2 & 3
20. Enter 4 digit code 1299 (DVD button on URC blinks twice)
21. Repeat steps 1, 2 & 3
22. Enter 4 digit code 1230 (DVD button on URC blinks twice)

23. Press the One For All URC buttons in the following sequence

1, 2, 3, 4, 5, 6, 7, 8, 9, THEN hold down 0 until "HELLO" appears in the display;

After about 1 minute the Player comes back to life as Multi Region.



--

-


Please dont forget to vote if you liked my answer


thanks

------




Feb 13, 2011 | Panasonic DMR-EZ48 DVD Recorder

1 Answer

I cant find the 4 digit of the one for all remote control model urc 1030b04 for a sharp tv


I can help you with your URC-1030 Universal Remote Control issues.

The URC-1030 codes for Sharp TVs are: 0093, 0165, & 0688.

For complete instructions on entering the URC-1030 remote codes, please refer to my posted Fixya Tip One For All URC-1030 Code Entry.

I hope that helps.
_______________________________________________
One For All URC-1030 Manual
One For All URC-1030 Code List
One For All URC-1030 Code Entry
One For All URC-1030 Code Search
One For All URC-1030 Reassign Key

May 13, 2010 | One For All URC-1030 Remote Control

1 Answer

Access 4 one for all codes for cutis mathis tv


I can help you with your URC-1050 Universal Remote Control issues.

The URC-3220 codes for Curtis Mathes TVs are: 0047, 0054, 0154, 0451, 0093, 0060, 0030, 0145, 0056, 0016, 0166, 0466, 0747, 1147, & 1347.

For complete instructions on entering the URC-1050 remote codes, please refer to my posted Fixya Tip One For All URC-1050 Code Entry.

I hope that helps.
_______________________________________________
One For All URC-1050 Manual
One For All URC-1050 Code List
One For All URC-1050 Code Entry
One For All URC-1050 Code Search
One For All URC-1050 Reassign Key

May 14, 2010 | One For All URC-1050 Remote Control

1 Answer

I have an old 13 inch sharp TV with no remote but do have a One For All Access 4 remote. I need the 4 digit code for the Sharp


I can help you with your URC-1050 Universal Remote Control issues.

The URC-3220 codes for Sharp TVs are: 0093, 0165, & 0688.

For complete instructions on entering the URC-1050 remote codes, please refer to my posted Fixya Tip One For All URC-1050 Code Entry.

I hope that helps.
_______________________________________________
One For All URC-1050 Manual
One For All URC-1050 Code List
One For All URC-1050 Code Entry
One For All URC-1050 Code Search
One For All URC-1050 Reassign Key

Nov 05, 2009 | One For All URC-1050 Remote Control

1 Answer

Urc-4700B00 tv was given to me,girlfriend don't


It is the remote that needs to have a code entered to recognize your set. Not knowing if you have the original remote (it shouldn't need a code at all), no one can help you yet.
Also, if you have a remote that didn't come with the set, your chances are slim that your particular set will be among those compatible with the remote. If that URC number is from the remote, you need to go to this website to find the code list:
Remotes

Jul 17, 2009 | Sylvania LC195SL9 19 in. LCD TV

2 Answers

Need 4-digit set up code for URC-3300B03 remote for Sony tv.


visit this web site it has the manual and codes:http://www.hifi-remote.com/ofaold/3300pro.html

Feb 22, 2009 | One For All URC-3300 Remote Control

1 Answer

Need TV codes


i am lookin for codes for a magnavox. i have a access 4 remote one in all.

Jul 24, 2008 | Televison & Video

Not finding what you are looking for?
One For All URC-1050 Remote Control Logo

2,575 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Cindy Wells

Level 3 Expert

5583 Answers

S. Gontko

Level 2 Expert

142 Answers

Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...