Question about Zodiac BARRACUDA G3 IN-GRND CLEANER

1 Answer

Just stopped sucking - Zodiac BARRACUDA G3 IN-GRND CLEANER

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 366 Answers

If it's a loss of suction, check your filter system. If it just stopped moving, unscrew the nut near the top of the unit just below where the hose plugs in and separate that from the unit. Push the white tube downward until the diaphragm is exposed on the bottom of the cleaner, you can pull it all the way out for better inspection. Make sure the diaphragm is uniform in shape and the inner valve is closely spaced. If it's deformed or has some debris in it, this will cause it to stop moving. The diaphragm is about $15 and is easy to replace. Hope this helps.

Posted on Sep 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi machine stopped because of cloth sucked up by accident.


There is probably a safety cut out on the machine, somewhere.

Feb 28, 2017 | Garden

1 Answer

How do I stop Yahoo Program freezing up every min. and then a recovery tab comes up ???


stop using yahoo it sucks and has always been buggy , all yahoo sucks. sorry a couple of years ago yahoo toolbar was a virus and info collector.

Oct 04, 2016 | Yahoo Computers & Internet

1 Answer

It keeps losing suctionm and the ball comes up and it stops sucking. Why?


sounds wilk a wet /dry vacuum cleaner
if that is the case the ball comes up to stop water / froth from being sucked through the motor
if that happening put more anti suds mix in the water or empty the receiver tib more often

Jul 26, 2016 | Vacuums

1 Answer

My carpet shampooer is not sucking up water?


Hey Karen, having no suction when cleaning can be a bummer.

Here's a quick link to troubleshooting steps to assist you:

http://www.bissell.com/FAQDetail.aspx?id=1117&cid=ccsocial

Feb 04, 2013 | Bissell 1699 ProHeat Clear View Upright...

1 Answer

Floor level brush stopped rotating after it caught


Look at the bottom and check a thread of carpet isn't wrapped around the brush, if so try pulling it off or carefully cutting it off. You'll probably see a collection of fluff etc above the brush that's stopping it from sucking up, pull this out, or it just may be that cause the brush isn't working its not picking up.
If this helps please rate me

Jun 20, 2010 | Bissell 6594 PowerForce Bagless Upright...

1 Answer

Dyson dc17 animal stopped sucking. brush still


Make sure the flexible hose that connects the beater brush housing up to the connection up by the dust bin is still connected. It could also have a hole in it so check for that as well.

May 23, 2010 | Dyson DC17 Animal Bagless Upright Cyclonic...

1 Answer

My Dyson turns on and is not sucking. It makes a


I have the dyson dc 27. On the bottom left back side of mine there is a circle, and ball inside of it. I turned it on and pushed the ball and it started working again. Sometimes it doesn't cover the whole and stops sucking air through it.

May 18, 2010 | Dyson DC07i Bagless Upright Vacuum

1 Answer

My oreck vacuum has stopped sucking up things.


It won't turn the brush because the belt is stretched or broke from the heat of sucking something too big up. If you have your service manual it should show you the location of the belt covers to replace it.

Dec 03, 2009 | Montgomery Ward Oreck XL Celoc...

1 Answer

The car starts then the primer pump sucks its self in then the engine stops


From your description you have a blockage in the fuel pipe between the fuel tank and the primer bulb.

May 20, 2009 | 1991 Peugeot 405

1 Answer

Accessory hose not sucking


Try taking the hose off, and making sure it is not stopped up, either in the hose, or where it attaches. Straighten a wire coat hanger and run down the hose to check for obstructions.

Hope this helps!!!

chad

Oct 08, 2008 | Dyson DC14 All floors Bagless Upright...

Not finding what you are looking for?
Zodiac BARRACUDA G3 IN-GRND CLEANER Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zodiac Pool & Spa Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

john h

Level 3 Expert

12173 Answers

Jay Finke
Jay Finke

Level 3 Expert

1340 Answers

Are you a Zodiac Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...