Question about Computers & Internet

1 Answer

Hi, I can't seem to install any software for the laser smart view webcam from the supplied installation disc. Microphone is recognized as usb 2.0 mic and works fine, but no webcam device is seen within Mac OS X 10.4.11 (Tiger) nor are there any setting options any where to try and get it working. Where can I find the software needed to download and install on a Apple Mac? Tried the laser web site and having problems finding anything for this webcam. Any help would be appreciated, Thank You.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 125 Answers

I am not sure which product number you have, but I have provided a link to the website where the manuals and firmware upgrades are for ALL thier webcams. Good luck, I am sure this will rectify your problem.

Here is your link: Click Me

Hope this helps

Posted on Sep 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A4 tech webcam + microphone issue


1st You download Webcam Driver.
A4 tech webcam After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Other Companies Camera Drivers for Windows XP Vista Windows 7

Jan 20, 2014 | A4tech 1080p Full HD Wide Angle Lens USB...

1 Answer

Microphone on imicro webcam not working


Click start control panel view devices and printers you should see your webcam from there if you are have trouble with your webcam Click start control panel administrative tools ,computer management ,device manager scroll down or click start right click on computer select properties device manager scroll to image devices image devices you could see a yellow question mark? right click to reinstall drivers or update driver Some webcams and programs require additional software, although that should be installed with the webcam if things are right. But is does not harm to check if your Java, Flash and Quicktime software are installed and up to date. But certainly check your DirectX software, since all video applications, including webcams, use DirectX for video processing. Try downloading the latest DirectX version and install it (Windows XP: DirectX 9.0c - Windows Vista: DirectX 10). http://windows.microsoft.com/en-US/windows7/Which-version-of-DirectX-is-on-your-computer click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it or select audio from the microphone drop down list make sure you have the right one selected and in the volume box make sure the microphone box has a tick in it or select the voice tab and make sure that you have the right media selected also select volume make sure the box for microphone has a tick in it also during a video call at the top of your screen you will see an option to for a video call using yahoo messenger this might vary if you are using another messenger service

Apr 05, 2013 | Imicro 1.3MP PC WEBCAM W/MIC

1 Answer

I have a "Smart webcam" with "no Software


that wasnt very "smart "


look for free software download online

Apr 16, 2017 | Computers & Internet

1 Answer

I cant install the webcam with mic


Steps for Installing Webcam with mic

1) Plug in the USB connector of the webcam into your PC's USB socket
2) Connect the MIC by pluging in the MIC connector to the RED audiio in socket provided at the back of your PC.
3) Install the webcam driver from the CD provided to you with the web cam
4) A new software must have been installed Click on the software's icon to start the web cam

Feb 27, 2011 | Radio Shack VGA PC Camera Webcam

1 Answer

I have just purchased a usb microphone and cannot get any recognition of the product on my laptop.i have installed as per instructions and everything is there to view but cannot get it to play on...


It most likely has nothing to do with your mic or sound card. Check your professional music software's settings/options. Does it recognize your sound card? I am aware of a lot of music software which find it hard to recognize a mic from a usb connection.

kc

Feb 22, 2011 | Acer (54.AA806.001) Sound Card

2 Answers

ATR3350 Microphone: Battery in. Plugged into laptop. Recorded video. ATR3350 Mic is ignored. Audio is still recorded from my Logitech Webcam software. How does this thing work?


You need to tell your computer which microphone / sound source to use.
In he absence of other instructions it is defaulting to the built in microphone.
Normally your sound-card software should detect a new device plugged in and ask you to confirm it. However if it is not doing so you may need to change the audio settings.
How to correct this will vary slightly depending on which operating system you are using.

Using a microphone with computer

To use any microphone with your computer you will need to enable it in control panel. The following instructions are for Windows XP but are broadly similar for Vista and Win7


Click START, CONTROL PANEL, SOUNDS & AUDIO DEVICES



Click VOICE


Now click the VOLUME button in the SOUND RECORDING BOX. Here you need to SELECT microphone as an input source for recording (as opposed to un-checking mute in the playback controls). If your webcam/ microphone is built in to the laptop there should also be a volume control called 'Internal MIC' - disable it by placing a check-mark in the mute box.


NOTE if microphone (or internal MIC) is not listed in the 2 sets of volume controls click OPTIONS, PROPERTIES on the tool-bar and place a check against microphone in the list entitled 'show the following volume controls' and then click OK.


That should be it but it is possible you may also need to turn off the microphone in the software for your web-cam.


Feb 09, 2011 | Audio Technica ATR3350 Microphone

1 Answer

The microphone on my C200 webcam won't work. I have installed the software and also downloaded from the website - several times. I have also changed USB etc. The video works but not the microphone. I...


You may just need to manually select your mic. Go to this free video mail site. Click on the mic icon and then try the choices in the drop down list. Record and play back brief recordings until you can hear yourself. Once you know the mic that works select it in Skype or other software program. It is usually under Settings, Audio.

Dec 23, 2010 | Logitech Webcam

1 Answer

Logitech Webcam Microphone not working


You may have a laptop with another mic installed or other mic software installed
try setting the webcam mic as default

TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Jun 14, 2010 | Logitech QuickCam Communicate STX Personal...

1 Answer

How do i install my web cam


hi,
Step 1 Purchase a camera. Webcams can range from a basic model for around $30 to ones that contain a motion sensor for around $350 or so. Most mid-priced models come with a microphone install. Decide on what this camera will be used for and choose accordingly.
  • Step 2 Read the installation instructions completely before attempting to install the camera. Although this may seem tedious and unnecessary, it can save time and headaches in the long run.
  • Step 3 Back up the computer's harddrivejust to be safe. This will allow for a speedy recovery should the installation mess up the computer.
  • Step 4 Install the webcam software. Before deciding to install the disc that came with the camera, check the Internet for an updated version of the software and download that if available.
  • Step 5 Plug in the webcam. The software should give a prompt at the appropriate time. Cameras are usually installed with a USB cable. If installed correctly, the computer will acknowledge so by popping up a message saying it can see the new device.
  • Step 6 Download an instant message program if using the web camera for chatting. Some free IM download programs include Yahoo Messenger, AOL Instant Messenger and Apple iChat.
  • jQuery('.article ol .image').each(function(i,e){ var $this = jQuery(this); $this.find('img').error(function(){ jQuery(this).remove(); $this.remove(); }); });

    Jul 14, 2009 | Ezonics EZCam III Webcam

    2 Answers

    Installing webcam


    1. install drivers and utilities came along with the webcam
    2 connect webcam with USB adpater cable.
    3. Check whether your operating system identifies your Webcam
    4. if not check USB adapter cable
    5 connect mic signal cable to your Mic in slot on the sound card

    Dec 20, 2007 | Computers & Internet

    Not finding what you are looking for?
    Computers & Internet Logo

    Related Topics:

    105 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Computers & Internet Experts

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    kakima

    Level 3 Expert

    102366 Answers

    David Payne
    David Payne

    Level 3 Expert

    14161 Answers

    Are you a Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...