Question about Sharp LC-52D62U 52 in. LCD HDTV
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Same problem. TV worked night before and then would turn on but no picture or sound. Power and OPC lights blinking. I couldn't change the channel or get to the menu.
I disconnected the coaxial cable and the power for a few minutes and then plugged it back in (electric) but left the cable off. I got a message that it couldn;t get a signal. At that point I was able to change the channels. I plugged the cable line back in and everything worked fine... Good luck!!!
Posted on Jan 04, 2009
Flashing power and OPC (OPC is for automatic brightness control that adjust the brightness according to room light) flashing means you have either thw power supply module or the backlight inverter module problem.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:
Please see my basic troubleshooting guide here:
Posted on Jul 14, 2010
SOURCE: Sharp Aqous 52' opc &
Unplug the unit from the outlet, then while unplug, press and hold the power on button for one minute to drain the voltage and refresh the boards...
Try to open again and see if the symptoms remain the same...
If yes, the power supply board produced an out-of-regulation condition and disable the unit. The most common caused of this symptom is the leaky/dried filter electrolytic capacitor in the output of the power supply section. It will drop the voltage from normal and trigger the blinking of the led light. It will not power up unless isolated the faulty parts.
Leaky capacitor sometimes has a bulged/dome at the top but not all. Dried capacitor has no physical indication of fault and looks new and in good condition but actually not. You must have a capacitor checker to determine its condition and pinpoint the faulty one.
If you don't have necessary tools and test instrument and can't troubleshoot the unit yourself, I would advice you to look for a qulified technician to isolate the symptoms..
Also check if your unit is under warranty period, avail it because the manufacturer will fix it for free. Don't attempt to open the back panel because it will void the warranty.
Hope I helped you.
Have a nice day!
Thanks for using Fixya.
Posted on Apr 25, 2011
Tips for a great answer:
Jun 10, 2016 | Sharp LC-52D62U 52 in. LCD HDTV
Jan 31, 2016 | Sharp LC-32DV22U Widescreen 32-Inch Class...
Aug 02, 2014 | Sharp LC-32SB24U 32 in. LCD TV
Jul 30, 2011 | Sharp Aquos LC-32G4U 32 in. HD-Ready LCD...
May 31, 2011 | Sharp LC-32SB24U 32 in. LCD TV
Nov 16, 2010 | Sharp Aquos LC-42D62U 42 in. LCD HDTV
Jul 14, 2010 | Sharp LC-32SB24U 32 in. LCD TV
Sep 02, 2009 | Sharp AQUOS LC-32D44U 32 in. LCD TV
Jul 10, 2009 | Sharp LC-32SB24U 32 in. LCD TV
Mar 13, 2008 | Sharp AQUOS LC-32D43U 32 in. LCD...
Oct 10, 2016 | Sharp LC-52D62U 52 in. LCD HDTV
407 people viewed this question
Usually answered in minutes!