Question about Flat Panel Televisions

1 Answer

Tuning in SKY remote control with Orion TV

Unable to tune in the volume control of the SKY remote control with Orion 37" LCD TV 37094 C.
Model number does not appear to be on the SKY model list or an equivalent number.
Is there a generic or universal model number that can be tried to tune into the SKY remote control?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Tuning in SKY remote control with Orion TV

Buy a better telly


Posted on Dec 23, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Elonex xv-s telvision no remote control cant find sourse to connect playstion without box is picked up automatically when switched on. it on scart connection

37" Elonex Widescreen HD LCD Television (Black) - Aria ...
Buy 37" Elonex Widescreen HD LCD Television (Black) - HDMI, 1366x768, 1200:1, 8ms Product Name: 37" LCD TV Model No: LT37V1 Main. ... 49~61KHz; FrontControls: Power, Source, Menu, Channel Up, Channel Down, Volume Up, ... Have you tried it with a HDMI connection as I can't seem to get mine to work with my ...Missing: playstion

[PDF]Operator's Manual - SunBriteTV
6) Do not install near any heat sources such as radiators, heat registers, stoves, ....Water-Resistant. Wireless Remote. Control. Model 3230HD. TV Installation .... If youcannot achieve that ... to both your DVD player and Composite's S-Video connector ....Connect an HDMI cable to the HDMI output of your Playstation 3.Missing: elonex

Jan 12, 2016 | Flat Panel Televisions

1 Answer

Need a code so that i can operate my LG tv. model no. 37LG5010 using my sky remote.

Firstly you may need to identify which version of remote control you have, versions that are dated pre 2002 may not operate the more modern TV's and a new remote control will be needed To see which version you have, open the battery cover on the back of the Sky remote and look at the text on the sticker it will state ‘Sky rev’ (or Sky+ rev or Sky HD rev), followed by a number, such as 4, 6 or 8. This number indicates the version of your Remote Control.
Version 4: May 2001 (Sky+ introduced)
Codes are 0065, or 0405,or 0037
Version 6: March 2004
Code are 0065, or 0405, or 0037
Version 8: January 2006 (includes all current Sky+HD remote controls)
Code are 1293, or 1206, or 0206
Programming the remote control
To control your TV firstly switch on the TV set, point the Sky remote at the TV, press the "TV" button on the Sky remote, then press and hold the "Select" and "Red" buttons together until the red light at the top of the Sky remote control flashes twice. Enter the code for the TV listings above (Use the 4 digit codes), the red light will flash twice if a valid code has been entered. Press the standby button on the Sky remote control, this should switch the TV set off, if so then press the "Select" button to store the settings. You should now be able to switch the TV back on and use the volume control button from your Sky remote.
If the TV did not switch off then it may require a different code, you can either start again using one of the alternative Direct codes above or continue with this process by continuously pressing "TV" then "Standy" then "TV" then "Standby" etc until the TV set switches off. This will provide a manual scan for variations within that product code

Apr 25, 2010 | LG 37LG50 37 in. LCD HDTV

1 Answer

I am unable to pick up sky and set it to a position on analogue tv settings. The Tv is sanyo ce26ld90b.

Hi there,

If first we could ensure some connections are tight before moving into TV settings.
You have told me that you are using sky over an analogue connection. Make sure that these are plugged in at both ends (sky box and TV) and that your sky box is on.
Now using your TV remote, enter the TV settings (there should be a button for this specifically on your remote), and opt for Tuning and manual tuning. The layout for most TV settings are similar.
By manual tuning, you are able to select the number on which you want to view a channel (in the analogue case, Sky as a whole is considered one channel on your television)
Now you should be able to use the left and right keys on your remote to tune up and down a range of frequencies, one of which Sky will be on. Once you have found this frequency, you should store it to the channel you have selected.

To my mind, the only thing that would then cause this to reset is if you turn off your TV from the mains each time you finish using it.

Aug 23, 2009 | Sanyo Flat Panel Televisions

2 Answers

What is the code for sky remote to operate orion tv-32082 a

please follow the steps below:


try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.


Little Dish Fitter

Aug 13, 2009 | Orion PM4202 Television

1 Answer

My sky remote just newly stopped working, It still works on the tv but when i press tvguide it puts the tv to ch 1 and thats it. Why wont the tvguide work

first of all I would like you to press the blue sky button on the top of your remote. Now press you tv guide button. If this has sorted it Great if not read on!!

what I am going to talk you through now is resetting your remote:

RED + SELECT (flashes twice)

now press the blue sky button at the top of your remote now try the tv guide button. this should work no problem now.

now to the small matter of tuning your remote back in to work your volume etc

please follow the steps below:


try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.


Little Dish Fitter

Jun 05, 2009 | LG 37LG30 37 in. LCD HDTV

1 Answer

Remote to opperate sky volume

please follow the steps below:


try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.


Little Dish Fitter

Apr 17, 2009 | LG RZ-37LZ55 37 in. HD-Ready LCD...

2 Answers

Tuning Sony KDL 32U3000 for Sky TV

Hi Max,
I an not familiar with Sky TV, I assume it a Cable or Satilite Service.
Here are a few things to check.
  1. Press the INPUT button on the TV remote or on the TV control panel, cycle through all inputs and see if you get a signal.
  2. From the TV's Video Menu, set tuning band to Cable and not to Air or Antenna.
  3. From the Video menu Scan for channels, there should be a Auto Scan option.
Try these and let me know how it goes, I can be of further assistance.

Feb 04, 2009 | Sony BRAVIA KDL-32S2000 32 in. LCD HDTV

3 Answers

Technika tv lcd 19-907 tuning in to sky in bedroom.

Hi i had the same problem but i have sorted mine now. What i was doing wrong was i wasnt tuning in the analoge channels only the freeview digital ones. To do this you need to first turn your tv on. Then press the "source" button, this will bring up a little menu at the top left hand side. When this menu comes up press the "Programme +" button (the one that you use for changing channels near the volume button) press this until you get up to "TV", when T.V is highlighted just wait 3 secs and it will switch over. You will probably get a blue screen with a no signal message (you are now on analogue) when you get this blue screen press the "tune" button. It will automatically start tuning in all of your channels, at first they will be fuzzy but as it works they will become clearer. Your sky channel will also be tuned in. When mine tuned in it didnt tune them in on the right numbers though, bbc2 was on number 1 etc. If you ever need to use a playstation or something it goes into the scart connection at the side of the t.v and you need to press "source" and go up to "scart". To get back onto the digital channels just press "dtv/dvd".
hope i helped!

Dec 14, 2008 | Flat Panel Televisions

1 Answer

Unable to Tune TV to Sky + RF output


The problem is that the modulator output frequency of your sky box is exactly the same as for example chanel 5 on your terestrial aerial.
You need to change this number to a different one thats clear of local terestrial transmissions

1) Select the Services button on your Sky or Sky+ remote control.

2) Type in 401 [select] on your key pad and you will get to the installer menu. You cant gain access to this via the drop down menu as it is designed for the Sky Engineer to use.

Select Option 4 to configure the RF outlets on your Sky Digibox.

4) The option RF Chanel Number change this number from example 35 to 60 .
You may need to do this using other numbers 26 34 55 etc
Every time you alter the number store it then try & tune TV to sky.
Any other sets in the house connected by RF leads will require retuning for sky.
Save new settings and you should find that your RF outlet to TV works fine.


Jan 30, 2008 | Flat Panel Televisions

12 Answers

How do I get the volume to work on my sky remote control?

I've just done this, guided by SKY but all you really need to do it....

Press Interactive button on remote

Choose option 5

Then choose set remote control, it should give you instructions and the correct cde fo ryou specifc tv

Good luck

Dec 18, 2007 | ViewSonic N2060w 20 in. LCD Television

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

442 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

66623 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides