Question about HP OfficeJet 6110 All-In-One InkJet Printer

Open Question

Hp 6110 makes copies and prints fine off windows xp, but will no longer scan for douments or e-mails. Says 'printer not connected'?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

IB4G2008
  • 3587 Answers

SOURCE: HP C4280 prints and copies, but will not scan

get new drivers first folk..

www.hp.com

Posted on Feb 27, 2008

  • 178 Answers

SOURCE: Can't print wireless from new Vista Laptop to HP 6110 - Help

Windows Vista is a "MEAN" O/S. Not all of the bugs are fixed yet and still hard to find compatable hardware for it. Microsoft did Vista completely different than other O/S's, they released it to program developers to retrofit the printers and such only 1 month before it hit the shelves. With Windows XP and other predecessors, the released them 6 mos before it hit the shelves. I am more than positive Microsoft will get their act together soon, until then, there will be these problems. I have tried EVERYTHING I know to work around it and haven't found a solution. Any other Suggestions from the Techs on here will more than likely be a dead end also. If I am wrong, I stand corrected. Good Luck to you.

Posted on Mar 15, 2008

mspcrepair
  • 169 Answers

SOURCE: hp psc 1350 all-in-one

Source: HP support

( Click link above to read complete article and instructions )

Introduction A full feature software and driver package for Windows Vista is not available for your product. However, the Windows Vista operating system installed on your computer contains a basic driver solution for your product. With the basic driver, the buttons on the product do not function and some of the advanced product features are not available. But you can still print, scan, and import and view images on a memory card, using the workaround procedures in this document. Use the following instructions to install the basic driver in Windows Vista, and then review the workaround procedures to use the available features for your product. Installing the printer driver When you connect the product to the computer, Windows Vista detects the hardware and automatically installs the correct driver. A notification lets you know when installation begins and when it is complete. You do not have to download any software or insert the product CD.

  1. Turn the product on.
  2. Connect the Universal Serial Bus (USB) cable to the printer and to the computer.
  3. A Your devices are ready to use window might display on the screen. If the window displays and does not close automatically, close the window.
Workaround procedures The basic driver in Windows Vista is sufficient for several functions. You can print from a software program, scan documents, and import and view images on a memory card. Printing Use these steps to print from a software program.
  1. Open the document to be printed in the software application in which it was created.
  2. Click File , and then click Print .
Scanning Use one of the following three methods to scan a document. Method one: Scanning with Windows Photo Gallery
  1. Click the Windows (c01367391.gif ) icon.

Posted on Oct 06, 2008

  • 2 Answers

SOURCE: hp psc 1210v all-in-one printer, scanner, copier will not scan

CHECK BELOW OTHERWISE GO TO HP WEB SITE AND LOOK FOR THE DRIVER SUPPORT TO DOWNLOAD.


Scanning
Use one of the following three methods to scan a document. Method one: Scanning with Windows Photo Gallery

  1. Click the Windows (c01367376.gif ) icon.
  2. Click All Programs .
  3. Click Windows Photo Gallery .
  4. Click File , and then click Import From Scanner or Camera .
  5. Click Import .
  6. Click Scan .
Method two: Scanning with Windows Fax and Scanning
NOTE: This feature works only with Windows Vista Ultimate, Windows Vista Business, and Windows Vista Enterprise.
  1. Click the Windows (c01367376.gif ) icon.
  2. Click All Programs .
  3. Click Windows Fax and Scanning .
  4. Click New Scan .
  5. Click File , and then click Scan .
Method three: Scanning with Paint
  1. Click the Windows (c01367376.gif ) icon.
  2. Click All Programs .
  3. Click Accessories .
  4. Click Paint .
  5. Click File , and then click From Scanner or Camera .
  6. Click Scan .

Posted on Apr 08, 2009

  • 414 Answers

SOURCE: HP F340 will copy, print, but will not scan; Windows XP.

follow the link for the guide that explains scanning.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&cc=us&product=1128309
Mark

If you need more let me know.

Posted on Apr 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hp printer 6110 officejet all in one keep giving message scanner failure when i want to print something


Please make sure that the printer is connected to a wall outlet and not to a surge protector because surge protector distributes the total electric supply equally to each and every device connected to that surge protector. Printer might work and might not with a surge protector but it will always work fine with a wall outlet till the hardware of the printer and power chord, adapter are working fine.

some times scanner failure error comes if it is not getting enough power supply.So if it is connected to a surge protector then I will suggest you to disconnect it and connect it directly to a wall outlet.
Now scan or copy any document and see if something happens.

If not the do check while you press scan or copy button the scanner light is moving or not?
If scanner light is not moving then do a hard re-set.

Hard Re-Set :
- disconnect power chord from the back of the printer and then from wall outlet or surge protector.
- wait for 40 secondsand then connect the power adapter to wall outlet and then to the back of the printer. The try to scan or copy....still not working then check if the scanner bulb is glowing or not?

If scanner bulb is not glowing and if you dont hear any noise while you press scan or copy...then printer hardware has gone bad and you need to replace the printer

Feb 25, 2011 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

I dont know how to scan from my printer hp psc 1315. printing and copy fine. please help me


Hello, Windows XP provides a basic set of scanning drivers, also referred to as Windows Image Aquisition (WIA) drivers, which you can use as an alternative to scan a document when you cannot scan using the HP drivers. You might choose to use these scanning drivers for one of the following reasons:
  • Your product released before Windows XP and HP has not released drivers that support scanning for your product.
  • You have not installed the available HP software that includes scanning.
  • You are troubleshooting a scanning problem and trying to identify the source of the problem.
Scanning with Paint To scan a document using Paint in Windows XP , follow these steps: NOTE: Before you begin, make sure that the product is connected to your computer.
Click Start , point to All Programs , point to Accessories , and then click Paint .Click File , and then click From Scanner or Camera .Make any desired setting changes.Click Scan .

Dec 07, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Have a hp f380 all in one deskjet printer with M/S Vista OS


Hi,

Ofcourse, if there is any software or patch, there will be free on the HP website. However, as you have mentioned, that you are able to print, that shows that the printing software is working fine, to test the scanning part, please confirm that you are able to make a copy or not from the front panel of the printer by placing a text document on the scanner bed, close the scanner lid and then press color copy. If you are able to make a copy fine, that shows that the printer functionality is working fine.

The issue could be with the communication or with the scanning software. To check the communication between the printer and the computer, perform the following steps on the Windows XP computer or Vista computer, be sure that the printer should be connected directly to the computer via USB cable at the back side of the tower without any USB HUB, as you are using a Deksjet F380, it is a USB connectivity printer.

XP:
Follow the below steps to Scan using WIA (Windows Image acquisition)

1.Verify that the all-in-one product power is turned on and the printer cable is properly connected.
2.Click Start then Click All Programs then Click Accessories then Click Scanner and Camera Wizard.
3.Follow the Scanner and Camera Wizard instructions to scan images to the computer.

Vista:
1. Press Windows logo and R on the keyboard*.
It will open a small run dialog box at the bottom left corner of the screen.
2. In the Run box type WIAACMGR and press enter.
3. Follow the onscreen insturctions and complete the scanning.

If you are able to scan fine using the above steps, then it shows that there is a communnication between the printer and the computer.

Please get back to me with the exact error message you are receiving when you try to scan from the computer, as to scan from the printer you should be able to scan fine from the computer (i.e., From HP Solution Center/ HP Director). So that I can assist you in much better way.


With Regards.
Mike.

Jul 03, 2009 | HP DeskJet F380 All-In-One Printer

1 Answer

Black page printwhen I try to copy or fax from my hp 6110 printer


The printer isn't shot, but the scan assembly is, it sounds like either the scan lamp is dead or the sensors in the scan assy. You should also be getting a scanner error. I would try the reset, powering up with either the #3 or #6 buttons pushed, and see if a reset helps.

Jun 22, 2009 | HP OfficeJet 6110 All-In-One InkJet...

2 Answers

Can't find how I initiate a scan on my HP 6110 all-in-one


I suppose there was a problem in your driver installation. For most USB devices, it is recommended that the drivers be copied/installed on the pc prior to attaching it via the cable. So, if you attached the printer to the pc before copying its driver to the hard disk, you are likely not to have the right result ok. Put back the driver cd/dvd into the drive tray and uninstall. Restart your pc and then follow the step above. Good luck

Jun 02, 2009 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

My HP officejet 6110 only prints in black and white


Every time I try to print I get a message saying that The Spooler service is not running, what should I do?

Feb 07, 2009 | HP OfficeJet 6110 All-In-One InkJet...

Not finding what you are looking for?
HP OfficeJet 6110 All-In-One InkJet Printer Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...