Question about Indesit 24 in. IDL500 Built-In Dishwasher

3 Answers

Hi, our Indesit IDL500 dishwasher has stopped working. The fault light 2 is flashing. The manual doesn't mention what fault this indicates. Any ideas. Cheers, Neil

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Indesit Master
  • 909 Answers

Hi Niel, If you were to start the cycle from the beginning, where in the cycle does this occur? . So many code numbers for so many units, hard to keep up .Just note if heating is taking place and if drainage is correct. Hear from you soon.

Posted on Sep 26, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a IDL40 dishwasher and It starts the program releases the tablet and the just washes and does not move on to the next stage of the program.

It fills with water ok
Drains ok when moved manualy
Can you help

Posted on Dec 09, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same promblem it occurs at the start of my cycle and getin it to even get it to start this ive to hold in the start button and keep pushing the power button in and out very fast a good few times to get the sound of the water to go do tou have a solution tfor this?? please reply thanx simon

Posted on Jun 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Indesit dishwasher IDL505 green light flashing water not entering the machine


Hi,

Here is a tip that will help you to find out why water will not come into the dishwasher...

Dishwasher Trouble No Water entering Dishwasher

heatman101

Aug 27, 2010 | Indesit 24 in. IDL500 Built-In Dishwasher

1 Answer

Ndesit IDL 535 DW, not cycling, water coming from under unt.


The washer is fitted with an anti flood device that detects water leaks and closes water inlet valve and puts washer in pump out mode. The anti flood device is a polystireen float with micro switch at the bottom floor of the washer. Dry the water and find the leak (pipe or pipe clamp) and this should then solve the error.

Jan 22, 2010 | Indesit 24 in. IDL500 Built-In Dishwasher

1 Answer

Shortly after turning my indesit idl530 on a fault code appears


the problem you are getting is a f01 fault,this is water in the base part of the antiflood devise.to check this if you tip the appliance backwards and water comes from the back at the bottom this is the problem,if you do this till it stops and then leave for approx 24hrs to dry out any water that may have gone on to motor,then check by switching on to start a program,if appears to work ok but then goes back to the same fault(draining all the time and light flashing)you will have to remove base and check for leaks.

Jul 04, 2009 | Indesit 24 in. IDL500 Built-In Dishwasher

1 Answer

Dishwasher fault codes


the heating element is probably bad.
i have a idl 600 here in naples italy and it would fill up and go into alarm light 2 and 4 and pump out the water.
heating element cost 28 euro and i changed it out.
had to change the clamps as well.
if you ohm the element it should show about 100 ohms.
if it is open its bad.
the mother board does some checks and if anything fails it alarms out and drains the water after a few minuts
ralph

Jun 02, 2009 | Indesit 24 in. IDL500 Built-In Dishwasher

2 Answers

Dishwaher not working


switch on water appears to run in after a few minutes second and forth green lught comes on and machine stops it is a IDL500 indesit machine

Jan 09, 2009 | Indesit 24 in. IDL500 Built-In Dishwasher

6 Answers

Green flashing lights , what does it mean ?


I have an Indesit IDL 500, the machine will start fine but after about 20 mins the Ist and 2nd button start flashing. Can you help?

Regards
Ingrid Houben

Jul 06, 2008 | Indesit 24 in. IDL500 Built-In Dishwasher

1 Answer

Indesit idl 705 Dishwasher


Having read another users fault (LUNNY) that has same fault. They got engr out and it was a blocked pump. Where is the pupmp located on this model as I have the same fault and want to resolve it asap.

Aug 24, 2006 | Indesit 24 in. IDL700 Built-In Dishwasher

Not finding what you are looking for?
Indesit 24 in. IDL500 Built-In Dishwasher Logo

1,260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Dishwashers Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

noel
noel

Level 3 Expert

4740 Answers

Ted Maxwell

Level 3 Expert

3519 Answers

Are you an Indesit Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...