Question about OKI C3200n Led Printer

1 Answer

EPSON PX700W HI. IV JUST BOUGHT AN EPSON PX700W PRINTER. IV INSTALLED THE INK CARTRIDGES FOR THE FIRST TIME WHEM IM TOLD TOO CLOSE THE SCANNER UNIT & INITIALIZATION WILL START. BUT WHEN I CLOSE THE SCANNER UNIT AN ERROR MESSAGE APPEARS SAYING 'INSTALL INK CARTRIDGES THAT CAME WITH PRINTER. CLOSE THE SCANNER UNIT. INITIALIZATION STARTS. M T0803/T0793, Y T0804/T0794 LM T0806/T0796'. THE INK CARTRIDGES ARE EPSON ORIGINALS. ANY IDEA? THX.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

I would take them out and double check for any remaining packing material etc and then make sure they are fully inserted. The simple things are always the ones to start with

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My printer is not recognising the replacement ink cartridge although I've used these before many times


If you have just installed a new cartridge and you still see an ink related error, the cartridge may be incorrectly installed. Follow these steps to make sure the cartridges are correctly installed:

  1. Make sure the Epson Stylus is turned on.


  2. Do one of the following:

    • If your printer indicates that an ink cartridge is expended, press OK.


    • If your printer does not indicate that any ink cartridge is expended, press Setup, select Maintenace, and press OK. Then select Change Ink Cartridge and press OK.
  3. Open the scanner.


  4. Open the cartridge cover.

    Caution:

    Never attempt to open the cartridge cover while the print head is moving; wait until the cartridges have moved to the replacement position.

    To avoid damaging the Epson Stylus, never move the print head by hand.


  5. Press down all the ink cartridges until they click into place to make sure they are properly seated.

    Note:

    If a cartridge is properly seated already, you may not hear a click.


  6. Close the cartridge cover and press it until it clicks into place.


  7. Close the scanner.


  8. Press OK to begin charging the ink. This takes about 2 minutes.

    You see a message on the display screen when ink charging is finished.

    Caution:

    Never turn off the Epson Stylus while the ink is charging or you'll waste ink.
If the issue persists, it appears to be an issue with the cartridge(s). Contact Epson for further assistance.

Sep 25, 2014 | Epson Stylus DX8400 All-In-One InkJet...

1 Answer

Printer TX550W has message "A printer error has occurred. Turn off and then on. See your documentation".


Hi, this error message usually caused by jammed papers or foreign objects inside your printer. To resolve this issue, please try the following steps.
1. Turn off the printer.2. Open the scanner unit.3. Check for any jammed papers or foreign objects then remove it.4. Check the ink cartridges and lids if push down fully.5. Close the scanner unit.6. Turn on the printer.

If the same error reappears, try the following.
1. Turn off the printer.2. Open the scanner unit.3. Remove all the ink cartridges.4. Turn on the printer >> your printer will display install ink cartridges.5. Install all the ink cartridges, make sure it clicks into place and also the lids should be push down fully.5. Close the scanner unit.6. Press the Start or OK button to charge the cartridges.
If the issue persists, your unit will require service. Please contact Epson so they can check if your printer is still under warranty or ask them for the nearest service center in your area.

Nov 23, 2011 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Why have my ink pads come to an end already and how do you change them i have an epson px700w?



Hi

You do not say which operating system you are using.


You do not say if you are using original Epson branded or compatible generic brand cartridges.

You do not say if the printer is new and if this is your first cardtridge change, or not.

Sometimes the cartidges that come with the printer are low volume, starter cartridges. The 2 types of cartridges have slightly different codes to distinguish them.

Some people prefer generic brand, compatible cartridges, which are generally cheaper but can be of inferior quality and some can contain inferior quality ink. Others prefer original Epson branded cartridges, which can be more expensive.

Some Epson printers can take both economy volume and high volume cartridges.

In Windows operating systems, generally:

Start > (Control Panel) > Printer(s) > right click on Epson PX700W icon > Printing Preferences > Maintenance > Ink Cartridge Replacement > follow on screen instructions > head cleaning >print test page.

or

Print a document > Print Dialog Box > click "How To..." > Maintenance > Ink Cartridge Replacement > follow on screen instructions> head cleaning >print test page.

If this answer helps you, please take the time to rate it. This helps answerers better understand the needs and the point of view of the asker and helps us explore the best ways to provide useful, high quality answers.

If you need further help, please feel free to post another question or add a comment to this question.

Thanks for using FixYa.

Aug 31, 2011 | Epson Office Equipment & Supplies

3 Answers

I need step by step instructions showing how to change an ink cartridge on and Epson NX110 printer


If the printer is out of ink in one or more cartridges (the ink light is steady), then with the printer on, lift the scanner unit and use the support to prop it up. Press the Stop button and the (first) empty cartridge will line up with the No Ink symbol on the printer. Press Stop again and the next empty cartridge will be moved to this symbol. Continue to press Stop until the cartridge carrier moves to the ink replacement position (depends on how many cartridges are empty). This is on the right side of the printer. Wait for the cartridge carrier to stop moving. Do not touch the white cable while changing the ink.

Next remove the first ink cartridge by pressing the two tabs towards the center of cartridge and pulling it straight up. (One tab is close to you and the other is closest to the printer.) Take your new cartridge for the slot and shake it four or five times. Then remove the cartridge from the package. Do not touch the green chip. Remove the yellow tape from the bottom of the cartridge. Next rotate the cartridge so that the nozzle is down and facing towards the inside of the printer. Then push it straight down into the slot until it snaps into place. Repeat these steps for the rest of the empty cartridges.

Once all of the empty cartridges have been replaced, lift the scanner unit and push the support to fold it. Close the scanner unit. Press Stop to start charging the ink system. Wait until the Power light stops flashing and remains on before turning off the printer or sending a print job to the unit.

If the Ink light continues to flash, open the scanner unit and press Stop. Press down on the cartridges to make sure that they are completely seated in the cartridge carrier.

If the ink out light is flashing or not lit, you need to use the Epson Utility to change the ink. This is part of the full software from Epson. For Windows right click on the printer icon in the taskbar (bottom right of the screen). Then select Printer Settings and click on the Maintenance tab. For a Mac, open the Applications folder and open Epson Printer Utility 3. Select your printer (if you have several Epson printers listed). Then click OK. (You will need to launch the utility before you open the scanner unit.)

The documentation for the Epson NX110 is available here: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_SessionID=@@@@1663277658.1305218830@@@@&BV_EngineID=cceeadfdielfldicfngcfkmdhjidfmh.0&cookies=no&infoType=Doc&oid=128284&prodoid=63084353 .

I hope this helps.

Cindy Wells

May 12, 2011 | Epson Office Equipment & Supplies

1 Answer

Epson printer CX9300 error B73 cannot recognise ink cartridge


A clone cartridge is a type of third-party ink cartridge that uses an identical chip to the original ink cartridge. People buy cloned cartridges to save money, since original cartridges are more expensive. However, sometimes the Epson printer does not recognize the cloned ink cartridge. After you install the cartridge, you might receive a message that says "An ink cartridge cannot be recognized." In this case, you will have to disable the Epson printer monitor.

Read more: How to Make an Epson Printer Recognize Clone Cartridges ' eHow.co.uk http://www.ehow.co.uk/how_6163069_make-printer-recognize-clone-cartridges.html#ixzz1YgKjqw42

Instructions
    • 1

      Install your cloned ink cartridge into the Epson printer.

    • 2

      Go to "Start > Control Panel" on your computer.

    • 3

      Double-click on "Printer."

    • 4

      Right-click on the icon of your Epson printer and choose "Printer Preferences" at the bottom of the dialog box.

    • 5

      Click on the tab entitled "Speed and Progress" and see the Epson printer monitor box.

    • 6

      Check off the box that says "Disable Epson Status Monitor" to turn off the ink monitor.

    • 7

      Click "Save" and close the windows. Your cloned ink cartridges should now work.

Epson may also display an error message if you refill the ink cartridges.




Mar 26, 2011 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Ink out. Press the OK button to replace the cartridge. So I do and I get, Open the scanner unit, replace the appropriate ink cartridges and Close the scanner unit. This after I filled the ink cartridges.


Here are a couple of sites that will help you replace your cartridges.
Documents & Manuals

http://files.support.epson.com/htmldocs/rx620_/rx620_rf/index.htm
Replacing Ink Cartridge
http://files.support.epson.com/htmldocs/rx620_/rx620_rf/ink_4.htm
Precautions on Ink Cartridge Replacement http://files.support.epson.com/htmldocs/rx620_/rx620_rf/ink_3.htm
Hope this is of some help. Bud

Mar 30, 2010 | Epson RX620 All-In-One InkJet Photo...

2 Answers

How do i reset the epson px700w?


Hi

You can purchase a service manual and the service program for your printer from.http://www.2manuals.com/index.php?cPath=56

the computer program is used to reset the waste ink counter, follow instructions in the service manual to first replace the ink pads, only then reset the waste ink counter with the service software for your model.

It would be recommended to take this to a epson service center, but you may do this at home if you wish.

Thanks,
SF

Feb 08, 2010 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Cannot regonize ink cartridges


An ink cartridge may be incorrectly installed. Follow these steps to make sure the cartridges are correctly installed:

1) Make sure the Epson Stylus is turned on.
Do one of the following:

  • If your printer indicates that an ink cartridge is expended, press OK.


  • If your printer does not indicate that any ink cartridge is expended, press Setup. Then press < or > to select Maintenance, and press OK. Then press A or V to select Change Ink Cartridge, and press OK.
2) Open the scanner.
3) Open the cartridge cover.
and wait until the cartridges have moved to the replacement position.

4) Press down all the ink cartridges until they click into place to make sure they are properly seated.

5) Close the cartridge cover and push it down until it clicks into place.

6) Close the scanner.

7) Press OK to begin charging the ink. This takes about 2 minutes.

8) You'll see a message on the LCD screen when ink charging is finished.


In many cases sometimes :
If you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge.


Jan 23, 2010 | Epson Stylus NX400 InkJet Printer

1 Answer

I have an Epson CX8400 printer and I just installed new ink cartridges (genuine Epson)all four and I get the error message "cannot recognize ink cartridges".


Try the following:

1. double check the part numbers of the cartridges and also their expiration date.
2. reseat the cartridges
3. after you place the cartridges back, close the scanner part and press and release the stop button.
4. If same issue, either an issue with the cartridge(s) involved or the printer itself

Hope this help

Feb 25, 2009 | Epson CX8400 All-In-One InkJet Printer

Not finding what you are looking for?
OKI C3200n Led Printer Logo

541 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

386 Answers

Jimbras

Level 1 Expert

13 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...