Question about Motorola Mobility RAZR V3xx Cellular Phone

3 Answers

Mobile keypad doesn't works

Due to get in water that is an lg set

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I've heard that drying in an oven, or using a hair dryier on low works for some people. Putting it in a box with a fresh silica dessicant could help, or burrying it in some fresh rice can help extract remnant water. If the phone ends up working, but the keys do not, it could be that just one of the connectors in the phone is corroded. These can be cleaned.

Generally, the keypad does not need to be changed. Usually, one of the flex connectors in the flip (screen/camera) portion of the phone is loose, dirty and/or corroded (maybe from water, sweat, wear, trauma, etc). This is relatively easily fixed by a semi tech savy consumer. You will need a size T5 star driver (and possibly a T6) and a small screw driver, along with some rubbing (isopropyl) alcohol and some Q-tips.

mobile keypad doesn't works - remove-screen-4.gif

For more information on servicing your phone, you should do an internte search for RAZR dissassembly http://www.google.com/search?sourceid=navclient&aq=t&ie=UTF-8&rls=GGLJ,GGLJ:2006 -45,GGLJ:en&q=razr+v3+disassembly and you'll get lots of hits including videos like this: http://video.google.com/videoplay?docid=-5120755491924318860#

When you have the top case dissassembled, the connector with the black patch on the top is likely loose. Clean the connections thoroughly with alcohol and a Q-Tip and reassemble. If it doesn't work, or only works partially, another cleaning may help (I had to go in twice).

http://www.celtnet.org.uk/mobile-phone/disassemble-motorola-v3-3.php

Posted on Jan 18, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 570 Answers

Http://www.fixya.com/support/r3771170-phone_water_damage

Posted on Jan 08, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 277 Answers

If you put the mobile into water means you have to go service centre only thee is no option because the water will set into the inner parts and the mobile slowly gets spoiled so u better go to the service

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG touchpad doesn't work


use the common sense,logically, fix it. God bless you
a stuck key or non-responsive key, most of the time you will have to replace the keypad for this microwave oven repair. If your keypad is connected to your control board by a flat ribbon wire, try disconnecting it and clean the silver contacts with an ordinary pencil eraser. After cleaning, plug it back in and try it. If it doesn't fix it, replace the keypad unit. Some units actually have keypad tests to confirm your diagnosis of a bad key.If your keypad and control is the same unit, replace that unit. Another note, unlike stove/oven keypads and controls, most microwaves do not have error codes or tests to distinguish whether it is truely the keypad or control. Most of the time, it is the keypad that needs replacing, but a small percentage of the time it can be the control. Check the tech sheet if they can point you to the right part.


8_3_2012_9_48_49_am.gif

Aug 02, 2012 | LG Microwave Ovens

1 Answer

Inner keypad doesn't work


Your Phone Keypad Ic Deafult So Please Change keypad Ic
and keypad Problem Will Solved

Jul 24, 2012 | LG enV3 VX9200 Cell Phone

1 Answer

Lg cu920 mobile keypad not working?


Your Phone Keypad Ic Deafult So Please Change keypad Ic
and keypad Problem Will Solved

Jul 23, 2012 | Cell Phones

1 Answer

Some of keys in the keypad doesn't work when i press them


This is usually due to water damage. There is no easy fix for this. I'd suggest taking it into where ever you bought it and asking them what actions to take to get it fixed or replaced.

May 05, 2011 | Sony Ericsson K770 Cell Phone

1 Answer

Nokia 5310 keypad 7,8,9 and sound key is not work


Hi,

This type of problem occurs due to many reasons
1)Water poured into the mobile phone.
2)Droping your phone.

1)Open the phone and see weather you have any water marks dried in the phone.
2)Check the keypad rubber(for change in colour of the key-rubber pad)
Then you should replace the board

If there is no water mark then, the fault is with Keypad crystal IC 100%,You have to replace or rehot it accordingly if it is damaged or loosened.

Please do rate the solution if the issue is resolved or post a comment for further assistance.


thank you for using fixya have a nice day:-)









Aug 06, 2010 | Nokia 5310 Cellular Phone

1 Answer

Water got on my lg cookie screen and now the touch doesn't work


you have to dismantle the that. then let it dry for sometime. with regards to the touch screen just wipe it with dry cloth.

Jul 05, 2010 | LG KP500 Cookie black on T-Mobile U-Fix...

1 Answer

Keypad is jammed


http://www.fixya.com/support/r3771170-phone_water_damage

Aug 23, 2009 | LG Shine KE970 Cellular Phone

1 Answer

Keypad wont work


you need to do a master reset of the phone to set it back to the first time you purchased the phone.
That should correct the issue, if that does not help then have the keyboard an dnot the keypad replaced from any mobile service center or professional mobile technician

Dec 31, 2007 | LG CHOCOLATE VX8500 Cellular Phone

1 Answer

Not able to charge Nokia 6600


that is not a mojor problem just u need to change IC for charging and if u r keypad is not working means u need to change ur keypad chip....

Aug 02, 2007 | Nokia 6600

Not finding what you are looking for?
Motorola Mobility RAZR V3xx Cellular Phone Logo

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

Virgil Wolter

Level 1 Expert

29 Answers

Rami Obeid

Level 1 Expert

16 Answers

D. E. Hev

Level 3 Expert

1175 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...