Question about Nikon Coolpix 5700 Digital Camera

1 Answer

When i take the picture its clear and focused but when i look at them they all have lines across theml, read an article http://www.imaging-resource.com/badccds.html and i know what to do so thankkks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 77 Answers

Hi buddy this is very helpful:

http://www.imaging-resource.com/badccds.html

For repair instructions, you can also visit the Canon USA support website. To read the specific service advisory for your model, use the pulldown menus to browse for your specific model, or simply type the model number into the box provided at the bottom of the page and click the "Search" button on the provided link.

another advantage is also that the Canon support website holds no forms or other needed documents, so you can save yourself some time (if you live in the US or Puerto Rico) by just calling the Canon Customer Support line at 1-800-828-4040. Support hours are Monday-Friday 8am to 12 midnight, and Saturday from 10am-8pm. (All times EST.) Alternately, you can send email to: carecenter@cits.canon.com.

I hope this helps you.

Posted on Sep 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My webcam is not showing clear picture


Try rotating the ring on the front of the webcam lens to adjust the focus. Also read this article on how to improve webcam video quality. It has lots of good tips, especially on lighting.

Jul 05, 2010 | Microsoft LifeCam VX-1000 Webcam

1 Answer

One horizontal line across the screen


Hello,
Read this article for troubleshooting.
Hope it helps.

Oct 07, 2009 | Texas Instruments TI-83 Plus Calculator

1 Answer

Horizontal blue lines with a slight blue wash in the screen


Hi,
Its because of Over Voltage of Screen (G2) to Blue CRT.
Take off front lower cover (speaker grill) and unscrew board. There you will need to find Focus Block mounted having 6 control knobs. 3 knobs are for Focus control and 3 are for Screen volts control. Find Blue Screen control knob and turn is Counter Click Wise slightly until bluish shade disappear on screen including few blue horizontal lines.
If you select AV input to adjust that will be fine as you do not need to wait for dark-scene.

Apr 09, 2009 | Sony KP-65WS500 65" Rear Projection...

1 Answer

Hitachi 50SBX78B Horizontal lines and bow


John, Hitachi site is down at the moment, if you remove the clips on the front of the IC`s you will see the numbers of the convergence ic`s, and yes they are a pain to get out, they are probably stk 392-110`s if they are the originals, you`ll have to un-solder 36 pins total to get them out, check for burnt resistors in the general area of the ic`s and replace any that are burnt before turning the set on,be sure to order a tube of "heat sink compound" to apply to the back of the new IC`s, once on the set will probably still look poor, this is normal, run the set for minimum of 15 minutes then push the " magic focus button " inside the front door panel, after it has finished running magic focus it should look great, video-tek

Feb 08, 2009 | Hitachi 50SBX78B 50" Rear Projection...

2 Answers

Toshiba 57h81 green will not focus


Typically this is a convergence problem and can be repair relatively easy. Refer to this video to determine if you truly have a convergence problem. Also make sure you use your TV's original remote to make this adjustment.

Nov 15, 2008 | Toshiba 57H81 57" Rear Projection...

1 Answer

Touch Focus Error


you need to replace both of the STK392-110 ICs you can get replacements at the following link and they come with free instalation instructions with pictures. Here's the link.
http://servicemanuals.vstore.ca/

Jun 20, 2008 | Toshiba 53H71 53 in. Rear Projection...

1 Answer

Toshiba 42 inch rear projection


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Nov 23, 2007 | Toshiba 55H70 55" Rear Projection...

1 Answer

Unable to focus camera.


The common cause of lines across the picture is a stuck shutter. This will cause over exposed pictures, out of focus, with lines across them. If the problem is infact a stuck shutter it will require full disassembly to fix, which will be somewhere between $100 and $200 to fix depending on where you send it. An image sensor failure, or focus motor failure can also cause simular problems - but they also cost simular amounts to fix. David Millier Advance Camera Repair

Mar 10, 2007 | Sony Cyber-Shot DSC-T1 Digital Camera

Not finding what you are looking for?
Nikon Coolpix 5700 Digital Camera Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

Ric Donato

Level 2 Expert

225 Answers

Are you a Nikon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...