- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The following steps will allow you to program your InteracTV controller:
Make sure the InteracTV controller has good batteries. Slide the 3
position memory switch, on the back of the controller, to the desired
memory position. The controller is capable of being setup for up to 3
different DVD players in 3 different locations.The controller must be
setup and tested individually for each of the 3 DVD players, but once
that is done the controller will retain the manufacturer's code and
does not need to be setup again.If the consumer accidentally enters a
new valid 4-digit manufacturer’s code, then they must set it up again
for that DVD player.It is a good idea to write the 4-digit
manufacturer’s code in the labeling area provided on the back of the
Insert the compilation DVD into the DVD player and turn on the DVD player and TV.
Insert the programming card into the controller; the green light should blink twice.
Locate the manufacturer’s codes in the user’s manual.
Enter the first 4 digit code listed under the manufacturer. Use the
right arrow button for the number. The light should blink after each
button press and blink a long blink after the 4th digit is entered.
Remove the programming card.The light should double blink when the card is removed
Insert the test card into the unit;the green light should double blink.
The DVD should skip to the test screen, if it does not, repeat from
step 3, choosing the next manufacturer’s code on the list. If the test
card skips to the footage, which resembles the test card, then proceed
with testing the unit.See Testing the unit section of you manual or
quick setup instructions.
If you have tried all of the manufacturer's codes listed and
you cannot locate an acceptable code, see programming the unit using
manual search in your user's manual.
You also might want to check this site for full product support:
To delete a player profile, go to the player profile screen and press and continue to hold down the following buttons in sequence:
Home A button Left arrow Then, touch the X icon that appears at the bottom of the screen and follow audio instructions. Note: You can only delete a name when all three name slots are filled.
We got our daughter a Leapster2 for Chrstmas 08. One day the sound just stopped working. Called Leapfrog. They said to insert a cartridge, and turn the unit on. Plug headphones into the headphone jack. Then rotate the headphone plug-in 360 degrees,( It is easier to hold the heaphone plug-in and rotate the leapster2). Unplug the headphones and check to see if the sound works. Leapfrog said try it more than once, and if it does not work contact them,1-800-701-5327. We tried it and Hallelujah it worked!