Question about Mitsubishi WS-65311 65" Rear Projection HDTV-Ready Television

1 Answer

My mitsubishi ws-65311 will not turn on. i ran the error code test and it comes up 2-3

Posted by on

  • don9170 Nov 25, 2009

    We are getting 2 blinks the the power goes off no display on screen.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 14,553 Answers

2 THEN 3 BLINK ERROR CODE MEANS PROBLEM in the deflection circuit--either no vertical deflection or no horizontal deflection.

Someone needs to open the set and look for shorts in either of these circuits---not likely you will get it fixed in home unless someone gets very lucky---what we do in this situation where I work is remove the entire light box(it can be removed with everything except the front keyboard assembly.)

Sorry if this is not good news--but it is what that error code suggests.

If you have questions or need advice reply to this post as I am here to help people.

REGARDS, SD TECH

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a mitsubishi ws-65809. I relpaced the STK392-570 ICs and turned on the tv and it powered on for 2 secs and went off. I ran the test and got a 2 and 2 blink. Then ran test and got a 1 and 2 blin


If you unplugged the set you will get the 1,2 no error found, the 2,2 is short protection, I hope you had that before the chips were replaced, it is one or both of the pico fuses bad that protect those chips.

see photo of board, locations are 9FAo4 and o5 on the middle board where the chips are but further back.
12_15_2012_1_52_39_pm.jpg they are both five amp pico fuses.

Dec 15, 2012 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

When TV is turned on the green light comes on but the TV does not. 2 seconds later the green light turns back off.


DO THE SELF CHECK THIS SET HAS AND LET ME KNOW WHAT YOU FIND:

When you turn on and green light comes on and then goes off:

On the front of the set press and hold both the Menu and Input buttons at the same time for longer than 5 seconds and release both buttons.

Power light will blink a two digit error code like 2 blinks, 2 blinks, a pause and repeat it several times.


Let me know and if this told you something you did not know rate this solution as very helpful as I do this here for free.

SD TECH

Aug 31, 2010 | Mitsubishi WS-65311 65" Rear Projection...

1 Answer

Tv stays on for awile and then turns itself off


23 is horizontal deflection failure. The problem may be the high voltage power supply or bad connection(s) in the yoke circuit.

May 28, 2010 | Mitsubishi WS-65311 65" Rear Projection...

1 Answer

Mitsubishi Model # WS 65311 HD 1080 turns on then shuts off.


try holding in the menu and input/device buttons on the front of the set both together and see if it blinks a series of blinks, pause briefly then blinks a second series of blinks, let me know what the blinks were sush as 22 or 24

Mar 12, 2009 | Mitsubishi WS-65311 65" Rear Projection...

1 Answer

Mitsubishi 1080 series, ws-65311 model


Same problem.. Checked the fuses but they're fine no reset switch to be found.

Sep 07, 2008 | Mitsubishi WS-65311 65" Rear Projection...

2 Answers

65 inch Mitsubishi replacement screen? (WS-65311)


I think I can help you out if you still need that screen, I have a new screen, both fresnel and lenticular lens in a frame for a ws-65411. contact me at jgrisz@comcast.net

May 07, 2008 | Mitsubishi WS-65311 65" Rear Projection...

1 Answer

How do you dismantle


It's in the manual in Appendix F.  I bet you can download the manual from the Mitsubishi site.  The problem is that it says that it is supposed to be done by authorized Mitsubishi service personnel.  We have not had any luck finding anyone in our area who is willing to come out and do it although it looks like it would be really easy for someone who knows tvs.

Aug 07, 2007 | Mitsubishi WS-65311 65" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-65311 65" Rear Projection HDTV-Ready Television Logo

Related Topics:

519 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1208 Answers

The Knight
The Knight

Level 3 Expert

73619 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...