Question about Westell Wirespeed LiteLine 6100 (B9961001002) Modem

1 Answer

Internet conection Recently I installed westell6100. after I pluged wireless (Netgear wgr614) to this modem I lose my internet connection at all.What should I do to have wireless network in my house? Fred

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 383 Answers
Re: internet conection

Modem buying tips Introduction Standards Interface Connection Internet availability .... price if card is a combo card (modem / NIC) or if the card is a ( wireless solution).

Good Luck, Please dont for get to Vote/Thank You.

Posted on Dec 22, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The Internet LED is red when there is no Internet connection

Unplug router for a minute or so and re connect also check if the computer is even recognizing the router in control panel under network conections

Jul 09, 2012 | NETGEAR CONSUMER Netgear Dgn2200m Wireless...

1 Answer

Cannot connect to the internet wireless or wired.Tools show that it is disabled and I tried everything to enable it but it will not change. The blue wifi indicator light is orange and has been since it...

If the problem is there both wired and wireless, the problem is then narrowed to your computer's modem/nic device. Speak with a Laptop repair tech about replacing this bit of hardware. When did you lose connection with Internet? Recently or long ago?

Nov 25, 2009 | Compaq Presario Modem/NIC Combo...

1 Answer

I have BSNL broadband with Siemens SL_2 141 modem provided by BSNL. I want to connect it wireless with my desktop. I also have a Netgear WG111 v3 USB adapter. Please suggest how to install the wireless...

First get IP of Siemens SL_2 141, start- run -cmd- ipconfig /all
Note down Default Gateway IP address ( Generally
Type it in Internet Explorer address bar and hit enter
put username admin, pass admin
Click Wirelles then in Basic setup, Enable Wireless, Enter SSID as BSNL, transmission mode 802.11g, then remaining option as auto, do not keep security now let it be disabled, click apply or save and rebot the router.
Install Netgear software in ur desktop let search for ssid BSNL and connect automatically. Once connection gets establish then set security WEP-PSK and put password also in Netgear u have to mention same password whil connecting.
More help here page no 97
any query revert,

Sep 05, 2009 | Modems

2 Answers

I have a Motorola SURFboard SB5101 Cable Modem a Netgear mr814v2 wireless router, I obtain the ip address on router status but for some reason my internet communication losed. I verified the configuration...

Hi, follow the steps below to configure MR814 with your motorola surfboard:


1. Connect a Ethernet cable from the modem to the WAN port of the router (isolated port).
2. Connect the computer to the router using any one of the 4 available ports. Please make sure that there is no direct connection between the modem and the computer (either using Ethernet cable or USB cable).
3. Power off the modem and the router after making the connections.
4. Power on the modem and wait for the lights, then power on the router.
1. Open the browser (Internet Explorer, Mozilla Firefox or Safari).
2. Access the router, usually with
3. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
4. Click on 'Basic settings' from the left menu and select 'Use Computers MAC Address' from 'router MAC Address' section.
5. Click Apply.
6. Once it updates the settings then power off the modem and the router. Power on the modem and wait for the lights, then power on the router.

I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion with the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.


Jul 29, 2009 | Arris SURFboard SB5101 Cable Modem

1 Answer

Motorola Surfboard 4220 not working with my Netgear WGT624 router

Make sure that you have the ethernet cord from your modem plugged into the WAN/Internet port on your router. Then unplug the power cord from your cable modem and plug it right back in. After the modem fully comes back online, unplug the power cord on the wireless router and plug it back in. wait 30 - 60 sec and then try and connect.

Most cable companies only allow one active"CPE" at a time for internet access. All this means is when you change what is connected to the cable modem you must always reboot the cable modem to allow access.

Hope this helps. Let me know if it does not work.

Please rate.

Mar 23, 2009 | Arris SURFboard SB4220 Modem

1 Answer

The internet connection keeps disappearing.

Change the router's IP address to ( maybe you have an IP conflict between the modem and router.

Mar 15, 2009 | D-Link DSL 300G+ (DSL-300G+) Modem

1 Answer

Replace netgear CG814WG with WGR614 Possibile???

CG814 and WGR614 both are wireless modem, with 4 LAN port.
the difference is CG814 use so call "stateful" packet inspection, where WGR614 is using NAT, which is less secured, and easily attacked.
both have spam filer, and you can set restriction as to what website or content of the website.
CG814 should cost more than the WGR814. you should ask the resaller for the difference.

Feb 08, 2009 | NetGear CG814M (pn-3201155) Modem

1 Answer

Wireless router stops internet connection to modem during install

are you sure your hooking the comcast modem in the right place?

Feb 08, 2009 | Arris SURFboard SB5120 Modem

1 Answer

Wireless routers

Just plug the cable modem ethernet into the input to your router and you will be fine. Just remember, if you decide you want to make any changes to your router settings through your browser, make sure you hook up an ethernet line from your laptop to the router before making any changes. The reason for this is if you make a change in security settings on your router while wireless, the router will reboot and if your laptop did have the settings changed in it, you can be locked out.
Not that you can't get back in, but it is a pain to have to do.

Jan 14, 2008 | Arris SURFboard SB4200 Modem

Not finding what you are looking for?
Westell Wirespeed LiteLine 6100 (B9961001002) Modem Logo

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westell Wirespeed Modems Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers


Level 3 Expert

469 Answers


Level 2 Expert

103 Answers

Are you a Westell Wirespeed Modem Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides