Question about Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

1 Answer

Whirlpool gold gu1200

Since glass broke yesterday, dishwasher is making a buzzing noise and will not go into cycle. What to do?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Sounds like glass fragments against the pump impeller. This may jam the impeller and reduce water pump volume giving poor wash performance and possible inability to evacuate the wash tub. It will not go away and may cause the impeller to fail. Remove screens and get the glass out. Do not poke around with your fingers unless you like cuts.

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gold model GU1200. Is there a filter module and, if so, how do I get access to clean it?


The location is shown as #17 on page 5 of your owner's manual. You may need a magnifying glass to see where the "line" is pointing to, but it does show it in the bottom of the machine. See link below:
http://kitchen.manualsonline.com/manuals/mfg/whirlpool/whirlpool_dishwasher_model_series_gu1200_gu1500_dul300_du640.html?p=5

Sep 29, 2015 | Whirlpool Dishwashers

1 Answer

Noisy Dishwasher


it is a capacitor to start the motor for the next cycle. I think it is inside the door. you may have to call a tech.

May 19, 2013 | Whirlpool GU2300XTVQ Builtin Dishwasher

1 Answer

8 yr old GU1200 stopped mid cycle - no apparent reason - no response to buttons - appears dead?


These dishwashers have a thermal fuse in the control panel. If it overheats for some reason (sometimes a bad connection on the fuse itself causes that)it will turn whole machine off.
  1. Disconnect power to dishwasher. Remove screws holding the control panel from the side of the inner door. Remove control panel. If it does not come off - remove all screws on the inner side of the door and separate the inner and outer door.
  2. Fuse is on the right side on top of the control board. it usually has tan or black or yellow wires to it. Disconnect wires and check fuse for continuity. if none - replace fuse. Here is your part
Good luck
Vlad
First Choice Appliance

Sep 11, 2010 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Buzzing sound


if buzzing while it is washing then probably is a motor problem but mostly not from hard water just poor quality parts

Apr 13, 2010 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Whirlpool gold dishwasher making buzzing sound while cleaning


HUSBAND FIXED IT I DONT KNOW WHAT HE DID THANK YOU FOR CHECKING ON US SHERYL

Jan 13, 2010 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

How do you fix a noisy whirlpool dish washer DU1100XTP(Q) ?


A hard object has entered the wash module (on some models).
When the object is ground up, the sound should stop. If the
noise persists after a complete cycle, call for service.

Mar 12, 2009 | Whirlpool Gold 24 in. Built-In Dishwasher...

2 Answers

Our dishwasher is making a loud noise during wash cycle.


if you have a torx 20, and torx 15 screw driver, you an remove the screws from the top plate of the wash motor, and underthere youll see another t15 screw converingthe "chopper" assy, sounds as if a seed, of chicken bone, perhaps apiece of glass hasgottne down there

Jan 25, 2009 | Whirlpool GU3600XTSY Stainless Steel...

1 Answer

Water will not drain out of dishwasher


trace it back along the outlet pipe and you will find on the pump a unscrewable plug be carefull as you are going to get a few litres of water over the floor

Apr 08, 2017 | Hotpoint 24 in. HDA1000Z Built-in...

1 Answer

Whirlpool Gold model GU1200 will not start wash cycle


FYI, for anyone else with the same symptoms. I took mine apart and found that the seal on the motor shaft failed and over time corroded the motor shaft bearing causing it to failed. I ordered full motor assembly from the parts store.

Oct 09, 2008 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Whirlpool Dishwasher Heater Element


service manual for gu1200 and 1500

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/52521bdbd0ef763c85256cbc00520548/$FILE/8178022.pdf

Jun 05, 2008 | Whirlpool GU1200XTLS Stainless Steel...

Not finding what you are looking for?
Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher Logo

407 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

Owen Barnes

Level 3 Expert

867 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...