Help to find and download fimware upgrade

D-link no longer hosts support information on its website. you will have to download firmware from other websites.
Since the new WBR-2310 is basically a di-624 chip with better firmware, your di-624 should be able to upgrade to WBR-2310 firmware. However, do so at your own risk. Whatever warrenty you have left is instantly voided and you might brick (make useless) the router. But it should work anyway.
It's less buggy too.
Here's the page for the WBR-2310 firmware: http://support.dlink.com/products/view.asp?orig=1&productid=WBR%2D2310
On this forum page the second post tells that the WBR2310 is basically a di-624 board, and the thread also tells that the WBR1310 is a di-524 board.
http://www.dslreports.com/forum/remark,15995077

Here's a page to the regular di-624 rev. D firmware:
http://drivers.softpedia.com/get/FIRMWARE/Others/D-Link-Router-DI-624-D2G-Firmware-403.shtml

http://www.dlink.com/

Click Support

Click United States

Click Product Information

Click here (between the gray and blue bars at the top)

Under Broadband, Under Routers, Click DI-624

Use the pictures to Choose the correct revision matching the label on the bottom of the router.

Note the international DI-624+ model near the top without a picture

If not international choose A, B, C, D, E
Click on picture that matches

The resulting page contains the manual, quick start guide, firmware, how-tos, etc

Allentown I also have a D-Link I bought at Costco in Taiwan have you ever gotten it to work. I am still trying here
thanks

I have the same issue. I tried to upgrade F/W & now my D-Link DI-624 router does not respond at all. When i power on the router all LEDs will glow (they don't blink, they just on forever) except status & WLAN. I tried with reset option, but it didn't work at all. Now it's not being detected by my computer either.

Please help me guys

Thank