Question about Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

1 Answer

I wash it on the normal cycle and it wont stop until i press the cancel/drain button, then when it drains, it will start over on the normal cycle and keep going unless i just open the door.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,923 Answers

The problem is that the timer switch gone bad. This switch is responsible in starting and stopping the machine to operate.

If the washer is still under the warranty, take advantage of it and have it repaired by the manufacturer's tech.

But if this is out of warranty, you should not cost too much just for the switch.

Have a great day!

Posted on Sep 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Dishwasher starts on its own (no house is not haunted). Start resume button flashes


have a service technician in as it appears to be a problem in the program board
could be moisture across the circuit board

Feb 06, 2016 | Maytag MDB7749AWQ Builtin Dishwasher

1 Answer

Kenmore elite dishwasher model 630 Smart Wash light is flashing


You may want to try:
Press a series of four buttons in quick succession. Press "Heated Dry," "Normal Wash," "Heated Dry" and "Normal Wash" to instruct your Kenmore dishwasher to run a short diagnostic test.
Wait for two minutes while your Kenmore dishwasher runs its diagnostic test.
Press the "Cancel/Drain" button once your dishwasher has completed its diagnostic test. This should reset your dishwasher control panel.
Check to make sure that there's no standing water in the bottom of your dishwasher. Standing water in your dishwasher may indicate that your dishwasher has stopped mid-cycle. You will need to press the "Cancel/Drain" button before you can reset your dishwasher control panel.

Dec 18, 2013 | Dishwashers

1 Answer

My Bosch dishwasher is driving me crazy! When it finishes a wash cycle it beeps twice every 10 minutes until the door is opened. We can't run the dishwasher at night after dinner unless we're SURE we...


Hello there,

It would help to know the model number of the dishwasher, but on many Bosch dishwashers, you can switch the cycle cycle completion signal off as follows:

1. While holding the right-hand CANCEL/DRAIN button, also press and hold the ON/OFF button
2. When the LED above the CANCEL/DRAIN button illuminates and the beeping starts, release both buttons
3. Press the right CANCEL/DRAIN button repeatedly until the beeping tone is at the desired volume, i.e. silent!
4. Press the "ON/OFF" button again to set the volume.

On models with the wash cycle buttons on the top edge of the door, the CANCEL/DRAIN buttons aren't always explicitly labelled CANCEL/DRAIN. These buttons are also labelled RESET on some models.

On models with 3 and 4 wash cycle buttons, the right CANCEL/DRAIN button is the third button when reading from left to right. On models with 5 wash cycle buttons, the right CANCEL/DRAIN button is the fourth button when reading from left to right.

Please try the above then let me know if you need further assistance. Please state the model number or series (i.e. Integra) of your washer if/when replying.

Hope this helps.

Regards,
BElectric

Mar 16, 2011 | Bosch Dishwashers

1 Answer

Want to stop buschh dishwasher shx43p15uc from beeping at end of cycle


Hi,

To turn off the cycle completion signal on a Bosch dishwasher, please do the following:

1. Press and hold the right "CANCEL/DRAIN" button then press and hold the "ON/OFF" button
2. When the light above the "CANCEL/DRAIN" button illuminates and the beeping starts, release both buttons
3. Press the right "CANCEL/DRAIN" button repeatedly until the tone is at the desired volume, i.e. silent
4. Press the "ON/OFF" button again to confirm/set the desired volume.

Happy Holidays!


BElectric

Dec 24, 2010 | Dishwashers

1 Answer

Washing cycle wont complete


I had the same problem. Called the repair man, who said it was a defective control board. He ordered a new one, replaced it and now the problem is fixed.

Dec 28, 2009 | Bosch 24 in. SHU53 Built-in Dishwasher

1 Answer

The only button that works is the cancel drain


Sounds like a keypad malfunction or the control board has gone bad.

Feb 13, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I suspect for either of these units that the timer control boards are bad.

Jan 24, 2009 | Dishwashers

1 Answer

Whirlpool Gold Quiet Wash Plus GU940SCGZ3


Press the cancel button, Then cut power to the dishwasher for a period of time. restore power to it then try a cycle.

Jul 27, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

2 Answers

Kenmore 22082


OL on my washing machine

May 17, 2008 | Kenmore 22062 Top Load Washer

5 Answers

Kenmore dishwasher Lock On light flashing


holding the button for four seconds will not do it, you have to hold it until the light stops blinking and
will go back to normal, normall takes more than four seconds to unlock the unit, this is something
the sears repair techs know becouse the are trained on all this things but, they will not share this things, becouse thats how they make money

Dec 29, 2007 | Dishwashers

Not finding what you are looking for?
Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

Owen Barnes

Level 3 Expert

867 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...