Question about RCA RTD205 System

1 Answer

The DVD tray will not eject. It cannot detect

The DVD tray will not eject. It cannot detect that there is no disc in try one, and will not search any of the other trays. How can I get the tray to eject?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

Usually there is a little hole near the eject button. That hole this is there for this spesific reason. Unplug the device and push a small pin into the hole. The trey should now be ale to gently pull out. This is the way that any repair shop will do this, so why pay if you can do it yourself?

Just be very gentle throughout the whole process. Push the oin in all the way untill you feel resistance and hold it in while you pull out the trey. Really hope this can help you. Please rate this.

Best regards

Posted on Sep 26, 2009

  • Sean Carling
    Sean Carling Jun 15, 2015

    first thing i looked for does not exist

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A jammed DVD will not eject. Message"Repairing" goes on and on and nothing happens.How can I reject the dvd?


To whom it may concern

Thank you for the offer. I will bear it in mind should I need further assistance.
I solved the problem by removing the cover and loosen the clips where the disc tray is and slid the release tray and by pressing the eject button, the tray ejected the disc.
I have tried other discs by recording, deleting and ejecting and so far the problem has not been experienced again.
Kind regards.

Mr. NTD

Jan 11, 2010 | Funai PY90DG DVD Recorder

1 Answer

Sony DVD Player keep ejecting CD/DVD tray - not detecting any disc.


if it keeps on opening up and wont close then the tray dectection switch is broken.....you need to get a new player.
or ifs its not reading the disc the laser mech is probably stuffed....time for a new one!

Aug 13, 2009 | Datel Max Media Manager Pro for Sony PSP

3 Answers

The DVD tray doesnt eject


either it is the ribbon wire, the motor that ejects the tray or the belt that connect the tray and motor is the problem. In case the above three are fine, replace the drive as the sparking might kill your moterboard.

Jul 08, 2009 | Compaq (CDD480172) CD-RW Burner

2 Answers

DVD will not play a disc, when you close the tray, it will eject


Bad Disc.

Try a known good store bought Movie in player?

Still Bad Disc?

DVD unit in your player is bad.

Throw in garbage.

Feb 19, 2009 | RCA DRC8320 DVD Recorder/VCR

1 Answer

I have a Gateway® M-6878h laptop computer, Whenever I put in a DVD or CD into the disc tray and try to eject I get an error that says "An error occured while ejecting DVD RW drive E:" and...


Hey,

There is a small hole in the cd / dvd drive tray, you can use a needle or something small to push in, it will eject the drive tray and the cd.

Thanks,
Ekse

Aug 30, 2008 | Computers & Internet

1 Answer

Dvd tray will not open


In order to open the disc tray.apply one of the following solutions;
--- Turn off the DVD player. Unplug the power cord from the AC outlet for 30 seconds.
Plug the power cord back into the AC outlet. Try to open the disc tray.
--- If the disc tray still does not open, simultaneously press the POWER + STOP + EJECT buttons.
--- If the disc tray still does not open, simultaneously press the DISC1 + STOP + EJECT buttons ,
--
- If the disc tray still does not open simultaneously press the RETURN + ENTER+ POWER buttons.
If the problem is still unresolved, a service may be required.
good luck...

Apr 06, 2008 | Sony DVP-NS400D DVD Player

1 Answer

Recording from vhs to dvd


Direct copy VCR to DVD:
- Insert VHS tape you want to copy
- Insert a recordable DVD disc
- Press DVD copy button on front panel or remote control (to DVD).
- To stop recording press the stop button.

IMPORTANT: If attempting to copy copyrighted material the Samsung DVD-VR320 will detect the encoding and will not allow the copy to be made.

Jan 20, 2008 | Televison & Video

1 Answer

Disc Tray Will Not Eject


Just next to the eject button on the actual recorder there should be a tiny pinhole.  If you use a small paperclip and insert it, then push, you should be able to manually eject the DVD.  Hope this helps!

Oct 16, 2007 | GoVideo Go Video DVD/VCR Combo

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

Gyula Lacz

Level 3 Expert

483 Answers

Are you a RCA Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...