Windows 98 video drives

The monitor has no influence here - something is wrong with your video card: either its driver is missing (or corrupted) or the video chip has failed.
Uninstall all the drivers for the video(except the generic VGA one), from Programs and Device Manager
http://pcsupport.about.com/od/windows7/f/open-device-manager-windows-7.htm
and reboot several times then go to Dell
http://support.dell.com/support/downloads/index.aspx?c=us&cs=19&l=en&s=dhs
select your pc and get the correct driver.
If that doesn't fixes it then the video chip has failed, you will need to buy a new video card.

You need to install a video driver for your video card. Do you know what video card is installed? Do you have the original install disks for the video card? For a machine that old, it may be hard to locate a driver.

I usually use Unknown Device Identifier (http://www.zhangduo.com/udi.html) to tell what drivers are missing, but I don't know if it works with Windows 98.

Installing Windows 98, is you need a start-up disk (floppy disk) first before you can use the Windows 98 cd. The start-up disk will perform the partitioning and formatting of the HD...doing this, you have to boot from floppy drive first---after partitioning and formatting, you have change again the boot sequence to boot from cd then you can start the installation of Windows 98.

You need to download new video drivers from the computer manufacturer or go to Windows Update and let windows update all your hardware drivers. When windows finishes searching for drivers it will give you the choice of express or custom. Click on custom and look in the left pane. choose Hardware, Oprional. Download and install the selected drivers. Reboot the laptop and reset your video options.

these are the min. specs for the game>
System Requirements:

• Windows 95, 98, ME, 2000, XP
• 166 MHz Processor
• 16 MB RAM
• 200 MB available hard disk space
• 16 Bit color graphics video card that's compatible with direct X 6 or higher.
• 8x CD-ROM drive
• 16 Bit compatible sound card
• A pointing device and speakers

Platform: WINDOWS 95/98/ME/XP

restart ur pc in safe mode
and make resolution to lower settings it will solve your problem

first restart ur pc
press F8 key continuously
it will shows windows boot option from their select start windows in safe mode
after booting up pc
right click on desk top
go to setting
make resolution to 800X 600 and and colour quality to 4 bit or lower
then apply
save it
and restart pc and it will show your desktop normaly


just in case if it wont work
do the same in VGA mode start ur pc press F8 and from booting menu
select Start windows in VGA mode
then do the same as safe mode
and restart your pc

Are you trying to install the software for a all-in-one printer? If you are, you have to Uninstall any previous versions first or it won't let you install the drivers.Good Luck.

For the Manual and Driver for Windows 98/ME/2000/XP

http://www.visioneer-europe.com/primascan/support/icam320.htm

Product Specification 100k Pixel / Colour CMOS Sensor
USB Interface with 2 metre cable
Manual Focus - 2 inches to infinity
Field of View Angle - 45°
Tilt Angle: Up to 20.4° / Down 20.4°
I/F: Snapshot button and LED Status indicator
Frame Rate: Up to 30 fps @ CIF, 5.12 KB/sec USB Bandwidth
Still Image Capture: 160 x 120, 176 x 144, 320 x 240, 352 x 288
Video Recorder: 160 x 120, 176 x 144, 320 x 240, 352 x 288
S/W Driver: WDM & TWAIN for Win 98 & 2000
Compatible with Windows Millennium
Includes Built-In Microphone
System Requirements USB Port
Windows 98/2000/ME/XP
233 MHz Pentium Processor with MMX or faster
32MB RAM or greater
800x 600 / 24-bit display
CD-Rom driver
Windows compatible sound card with speakers
Internet Service Connection

You need to install the Video driver for your graphics card to get full use of your display card with full feature.

• There might be a motherboard CD shipped with your PC, it might include driver for your all devices.
• Just put that CD and install the required drivers.
• If you don't have any CD like that, then you should go to your manufacturer's site and make download driver for your device for Windows 98.

Thanks
Iqbal

What error comes up?

Nero 7 is not made for vista, however I got it to work..

General System Requirements

• DVD-ROM drive for the installation
• Windows® 98/98SE/ME/2000 (Service Pack 4 or higher), Windows® XP, Windows® Server™ 2003, Windows® Media Center Edition 2005,
• Windows® Internet Explorer® 5.5 or higher
• To install Nero 7 you must have administrative rights for all operating systems higher than Windows® 2000.

Processor and Installed Memory

• For writing audio and data discs: 800 MHz Intel® Pentium® III processor, AMD™ Sempron™ 2200+ or equivalent, 128 MB RAM
• For TV recording, DVD and video authoring: 1.2 GHz Intel® Pentium® III processor or AMD™ Sempron™ 2200+, 128 MB RAM
• For capturing and burning in real time: 1.6 GHz Intel® Pentium® 4 processor or AMD™ Sempron™ 2600+, 128 MB RAM

Hard Drive Space

• 1 GB hard drive space for standard installation of all components
• Up to 9 GB free hard drive space for DVD images and temporary files

Display Settings

• Microsoft® DirectX® 9.0 or higher • Graphics card with at least 8 MB video memory and minimum resolution of 800 x 600 pixels and 16-bit color settings. However, 24-bit or 32-bit are recommended.

Optical Device

• CD and/or DVD/DVD-RAM recorder

Sound Devices and Speakers

• 16-bit Windows® compatible sound devices and speakers • Installation of the latest WHQL (Microsoft® Windows® Hardware Quality Labs) certified device driver recommended

Nero 8 was