Question about Panasonic Lumix DMC-FZ20 Digital Camera

1 Answer

When power up, says please turn off and turn on. no control works

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 96 Answers

This is usually a lens issue, has the lens been knocked, is it sitting wonky? it could be grit in the mechanism. Need to go to the shop for repair.
If the lens is out, then someone knows what happened, as it was on when it stopped working.

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Once TV is turned on can't none of commands work


If you're using Universal remote controller make sure it's programmed correctly.
Please provide more details.
Good Luck!

May 22, 2013 | Televison & Video

1 Answer

I have a coin operated timer control box for my washing machine. Someone turned the power off at the wall and now it won't work


Please confirm if the power was restored. Now If so then you can turn it off once again and wait for few minutes before switching it ON. Tap on sides while the machine if switched off to confirm if any coin was lodged while the power was off. If this is struck within you will need to remove the covers to clear the mechanism and reset the sensor action. Also check if there is power supply within the unit for the functioning of the control board.

Jan 25, 2013 | Washing Machines

1 Answer

I cant use my controler because the green part keeps bliking and wont turn on so i cant play my xbox 360


I had this exact same issue the other day. Changing the batteries did not work for me, but don't cross that off of the list quite yet. This worked for me:
1.) Pop the battery pack off of the controller. This is the only way you're going to be able to turn it off. Wait about 5 seconds and put the battery pack back into the controller.
2.) Turn on your X-Box with the power button ON THE CONSOLE. It should turn ON. If it doesn't, unplug the X-Box for 30 seconds, plug it back in, and try again.
3.) When your X-Box turns on, go ahead and hit the controller's power button. Things should function normally from this point forward.
Please let me know if this works for you!

Sep 30, 2011 | Microsoft Xbox 360 Controller

1 Answer

Hi I've turned my machine on (F&P Intuitive Eco) and it makes all the noise when turned on, but after that, the power board doesn't come on. It was working perfectly fine yesterday. Please,...


Hi just read your posting.If your machine does not power up when you turn the power on at the power outlet then there are 2 reasons for this,The 1st is your drain pump is faulty or 2nd your control module is faulty.Would you like help in the testing of the pump to see if this is the fault.If it is the pump that is faulty then the control module should be alright but if the pump is not faulty then the fault is the control module.Also check the power outlet with a small appliance to see if there is power there.Looking forward to your reply.

Oct 02, 2010 | Fisher and Paykel Washing Machines

1 Answer

Control set blinks, clock will not reset, oven cannot work


replace the control board heres how u can check the control to assure it is the control take a multimeter and check for power going into the control board turn the oven on bake and follow the lead for power going to the bake element if your power is going into the control board but not leaving the board you would need a new control. please remember to rank how this post has helped in your appliance situation and if i can answer any other questions please message me back thank you again
rickead1

Aug 20, 2010 | Hotpoint RGB745 Gas Kitchen Range

1 Answer

My Sharp LC-32SB24U will not power on from the remote. It will work if you push the button on top. I have another sharp lcd in the house and I tried that remote also but it still will not turn on from the...


You have to unplug the television after turning it off. Take the batteries out of the remote control. Point the remote toward the remote sensor (bottom right hand corner of the television set). Press the power button on the remote control and hold it down for 30 full seconds. Next press and release every button on the remote control. Next plug the tv back in and power it on from the power button on the television itself. Replace the batteries. Adjust the volume using the remote control. If that works the problem is solved. If it doesn't work you may need a software update, a new remote control, or repair to the sensor on your television.

To see if your remote control is working look at it through the viewscreen of a digital camera. The digital camera must be turned on and ready to take a picture. Next press a channel button on the remote control. Do you see a bluish white light? If so the remote control is ok.

Jun 01, 2010 | Sharp LC-32SB24U 32 in. LCD TV

2 Answers

POWER UNIT IS NOT WORKING


sounds like the motor controller is faulty.if u have power to unit and the lights aren't on then it is either faulty controller, or faulty pump or best case broken power wire.please turn power off b4 u work on it. dont want any accidents. please reply 4 more help.

Apr 09, 2010 | Fisher and Paykel GWL11 Top Load Washer

2 Answers

Our Bonaire Evap Cooler stopped after power failure


Turn the power of to both the heater and the cooler. Turn the power back on to the heater and the cooler at the same time then reset codes on controller.

Feb 07, 2010 | Mastercool 67471 Evaporative Cooler Air...

Not finding what you are looking for?
Panasonic Lumix DMC-FZ20 Digital Camera Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Cameras Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

73619 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you a Panasonic Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...