Question about RCA Scenium D40W20 40" Rear Projection HDTV

1 Answer

RCA Scenium 52 DLP

My TV keeps going blank. The picture will do something weird and then the screen goes blank but you can still hear, just not see. rca scenium dw51 comes on with sound, screen was like jumbling squares for a couple of weeks, and now no picure at all. only sound. it is now also turning itself off.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that gotĀ 5 achievements.


    An expert who has achieved Level 3.


    An expert that hasĀ over 500 points.

  • Master
  • 482 Answers
Re: RCA Scenium 52 DLP

You should take it to a tv repair shop to look it over, they charge $50 and they will tell you want the problem is.

Posted on Dec 17, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have an RCA Scenium HD DLP 50" TV Rear

What is the Model Number that is printed on back of TV?
You say TV is DLP ,but you are posting Model# HD52W59 that is for Projection that has 3 Tubes Red/Green/Blue Tubes.
If TV is DLP then problem will be the Color Wheel
If it is Projection then it has a coil on the deflection board that either needs to be replaced or
resolder ciol and take a Glue gun and glue over the top of coil. Coil LL037 on the right handside of the FBT flyback transfomer.

Jan 13, 2011 | RCA HD52W59 HDTV Projection Television

1 Answer

The inputs on my RCA scenium dlp tv wont work.

It sounds like your talking about the ITC222 chassis series which is having a small signal board problem. Very common in the RCA ITC222 and ITC222A Chassis HDTV's

Jul 12, 2010 | RCA Projection Televisions

1 Answer

RCA Scenium

What does the picture look like when it is on?

Dec 03, 2008 | RCA Scenium D40W20 40" Rear Projection...

1 Answer

My RCA Scenium 50in. is not turning on!!

Its sounds as if the lamp has exploded or the color wheel has. I will post a link to a site that has a trouble shooting manual on CD called RCA DLP Disc #1 which covers every DLP in the ATC line which is what your model is. They have it either in cd form or they will email it. Its a very good resource for fixing your own set.

Jun 16, 2008 | RCA HD50LPW175 50" HDTV

1 Answer

Thomson Scenium 52" backprojection tv, Does not start

try resodering the connections on the flyback. Its fairly comon for that model to have hairline cracks at the solder joints which will cause the symptoms youre describeing.

May 27, 2008 | RCA Scenium D40W20 40" Rear Projection...

1 Answer


suspect the optical engine as the culprit. they can gather dust contamination internally and cause a "faded or washed out pic"

Apr 09, 2008 | RCA Scenium D40W20 40" Rear Projection...

2 Answers

"52" RCA Scenium DLP; No Picture and the buttons flash on and off

On the back of the TV, you'll find the Access door to your lamp. Unplug the TV from power, and remove the screw on the access panel. Inside you'll find 2 additional screws holding in the lamp housing assembly. Remove the screws, then the lamp assembly and visibly inpect it. You'll know if the lamp is defective, it will have obvious damage. If so replace with part # 260962, you can acquire this lamp for arround 100 dollars off ebay, or 262.00 direct from RCA.

Nov 09, 2007 | RCA HDLP50W151 50" Rear Projection HDTV

Not finding what you are looking for?
RCA Scenium D40W20 40" Rear Projection HDTV Logo

Related Topics:

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 2 Expert

397 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides