Question about Microsoft Xbox 360 Console

1 Answer

There is no video ouput, but system is on and working. You can hear the system turn on and I can turn it off by holding the "X" and moving the d-pad down twice and pressing "A". No red ring of death.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Might be a problem with the wires connecting the xbox to the tv .. try the xbox into another tv if that doesnt work try using another wires

Posted on Sep 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The PS3 system reads discs with music and video but does not read discs with games on for PS3


Welcome to Fixya

Try the troubleshooting procedure below:

Step 1 - Turn off the playstation 3 by holding the power button on the front of the unit till the power light is red.

Step 2 - Touch and hold the power button, you will hear the first beep, meaning the playstation 3 is powering on. Continue to hold the power button and after about 5 seconds, you will hear a second beep, indicating the video reset. Continue to hold the power button and after about 5 seconds, you will hear a third beep and the system will power off (power light is red).

Step 3 - Touch and hold the power button, you will hear the first beep, again for the playstation 3 to power on. Continue to hold the power button and after about 5 seconds, you will hear a second beep for video reset. Continue to hold the power button and after about another 5 seconds you will hear a quick double beep. At this point release the power button. if you succeeded in activating the safe mode, you will see a message on the screen saying 'connect the controller using a USB cable and then press the PS button.

Step 4 - Perform the safe mode options in the following order until one of the options works for you. If one option works, do not continue onto the other options.

Restore Default Settings
Restore File System
Rebuild Data Base
Restore PS3 System etc...

Thanks!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Jan 09, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

PS3 Discs Not Loading.. (Dvds, Cds) We Opened Up The PS3 And Checked The Drive And Cleaned The Lens And Dusted Off Everything Pretty Much And We Put It Back Together And turn it on Still Not Working Jus...


Welcome to Fixya

Try the troubleshooting procedure below:

Step 1 - Turn off the playstation 3 by holding the power button on the front of the unit till the power light is red.

Step 2 - Touch and hold the power button, you will hear the first beep, meaning the playstation 3 is powering on. Continue to hold the power button and after about 5 seconds, you will hear a second beep, indicating the video reset. Continue to hold the power button and after about 5 seconds, you will hear a third beep and the system will power off (power light is red).

Step 3 - Touch and hold the power button, you will hear the first beep, again for the playstation 3 to power on. Continue to hold the power button and after about 5 seconds, you will hear a second beep for video reset. Continue to hold the power button and after about another 5 seconds you will hear a quick double beep. At this point release the power button. if you succeeded in activating the safe mode, you will see a message on the screen saying 'connect the controller using a USB cable and then press the PS button.

Step 4 - Perform the safe mode options in the following order until one of the options works for you. If one option works, do not continue onto the other options.

Restore Default Settings
Restore File System
Rebuild Data Base
Restore PS3 System etc...

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Dec 31, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

Dvd works games don't ps3


Welcome to Fixya

Try the troubleshooting procedure below:

Step 1 - Turn off the playstation 3 by holding the power button on the front of the unit till the power light is red.

Step 2 - Touch and hold the power button, you will hear the first beep, meaning the playstation 3 is powering on. Continue to hold the power button and after about 5 seconds, you will hear a second beep, indicating the video reset. Continue to hold the power button and after about 5 seconds, you will hear a third beep and the system will power off (power light is red).

Step 3 - Touch and hold the power button, you will hear the first beep, again for the playstation 3 to power on. Continue to hold the power button and after about 5 seconds, you will hear a second beep for video reset. Continue to hold the power button and after about another 5 seconds you will hear a quick double beep. At this point release the power button. if you succeeded in activating the safe mode, you will see a message on the screen saying 'connect the controller using a USB cable and then press the PS button.

Step 4 - Perform the safe mode options in the following order until one of the options works for you. If one option works, do not continue onto the other options.

Restore Default Settings
Restore File System
Rebuild Data Base
Restore PS3 System etc...

Thank you!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Dec 18, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

Subwoofer not working.... JVC surround sound system 778V Subwoofer Part Number SP-PW37-SUB I hear a hum coming from unit so there's power going to it. I hear weak bass thumps with volume turned all the way...


A connectivity check could provide the solution, notice any wrong wire connections on device or any other devices requiring interconnection. The woofer would perform properly when the connections that provide current for woofing are approapiate

important notes
1. Trace the connection from Recorder or sound output to the woofer device
2. The wiring connections should be sound and video ouput into sound and video output into woofer.
3. The connections if any problems would be located at the stereo recorder or device producing the spund and video. Check the connections of wires on the recorder device ensuring rewiriing
4. finally, adjust the equalisers if any the buttoms could have been disbled by master switch hindering full blaster boost sound.

Dec 05, 2010 | JVC RX-778V

2 Answers

My so moved his ps 3 from the HDTV (HDMI) cable


Nothing wrong, you just need to reset the video back to default.

While the PS3 is off (red led), hold down the power button until you hear the SECOND beep, quickly release.

Video should be up now :)

Nov 21, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

No picture for ps3,i went to service menunand did something wrong


You probaly turned hdmi on or off i dont know what your settings is,

you can turn your system settings back to factory default using the Safe Mode.

Step 1: Turn off the PLAYSTATION 3 by holding the Power button on the front of the unit till the Power light is red.

Step 2:
  1. Touch and hold the Power button, you will hear the first beep, meaning the PLAYSTATION 3 is powering on.
  2. Continue to hold the Power button and after about 5 seconds, you will hear a second beep, indicating the video reset.
  3. Continue to hold the Power button and after about another 5 seconds you will hear a third beep and the system will power off (Power light is red).

Step 3:
  1. Touch and hold the Power button, you will hear the first beep, again for the PLAYSTATION 3 to power on.
  2. Continue to hold the Power button and after about 5 seconds, you will hear a second beep for video reset.
  3. Continue to hold the Power button and after about another 5 seconds you will hear a quick double beep. At that point release the Power button. If you succeeded in activating Safe Mode, you will see a message on the screen saying, "Connect the controller using a USB cable and then press the PS button."
  4. Connect a USB cable to the controller and the PLAYSTATION 3 and press the PS button to enter Safe Mode.
  5. Then you will see the Safe Mode menu.

    safemode2.jpg //

Step 4: We recommending performing the safe mode options in the following order until one of the options works for you. If one of the options work, do not continue onto the other options.
  1. Restore Default Settings
  2. Restore File System
  3. Rebuild Database
  4. Restore PS3 System

Oct 04, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

I try to turn the tv on with the remote & it clicks on and off.


Probably a problem with the horizontal ouput transistor it is probably bad and/or the flyback(high voltage transformer). One or the other is probaly bad and it may be both. Horizontal ouput is definately shot if you hear a squealing sound when you go to turn it on and the flyback is probably the culprit.

Jul 20, 2009 | Sharp 32C241 TV

1 Answer

Black screen When i turn my ps3 on


You can try to reset the system. The way that you go about that is to push and hold the power button for, I think 15 secs. you will hear it beep and then reset. Give it a try.

Feb 03, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

We hear the game on the TV but game does not show on the TV


Hold your finger on the pad when turning on till it beeps to reset video. let me know if this helps.

Dec 13, 2008 | Sony Playstation 3 (PS3) Console

1 Answer

Surround sound ok whilst playing dvd but not working for tv


On your Sagem TV you should have two RCA ouputs (red and white connection usually marked ouput) ) Connect these to the input on the surround system using the interlink cable.

You should then be able to hear the sound from the TV by changing the SOURCE on the home cinema remote.

Better still if you have a digital out on your TV use that instead.

Nov 25, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Microsoft Xbox 360 Console Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles & Games Experts

Martin Murray

Level 3 Expert

1623 Answers

Stu Morris K

Level 2 Expert

178 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Microsoft Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...