Question about HP PSC 1315 All-In-One InkJet Printer

1 Answer

1310 printing problem

I'm trying to print a christmas photo of my daughter with santa and the red is green and the green is red in some place and her hair(brown) is also coming out green in places. I replaced the ink cartridge that didnt work, changed the color settings that didnt work. I uninstalled then reinstalled twice that didnt work either. What can I do?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 208 Answers
Re: 1310 printing problem

To use the Color Correction Wizard, go to the printer's Color properties page, select User-defined color correction , then click Start Color Correction Wizard button. The Color Correction Wizard helps the user perform the following steps:

  1. Choose the sample picture to be used. This can be the document that's open in the current application, or one of several samples provided by Hewlett-Packard.
  2. Choose the type of correction to be applied to the picture. The brightness, the contrast, or the color balance can be varied.
  3. The Wizard prints the same picture ten times with different degrees of correction applied to it.
  4. Look at the printout and decide which of the ten is preferred.
A combination of corrections of different kinds can be used. For example, when selecting a brightness correction, the Wizard can be instructed to give another set of ten prints from which to select the contrast, or the color balance. When the final selection is made, the combination of corrections that have been chosen will be saved. This combination may be saved and used in future whenever selecting User-defined color correction .

Posted on Dec 20, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

When trying to print my photos on my Epson Photo R200 the images that are printed are varying shades of green and not the colours supposed to be printed. I am using a good quality gloss photo paper. Couls...

Most ink jet printers have a self cleaning you can do.
The fact that you're getting shades of green usually indicate that the red is not printing properly.

Self cleaning should take care of it

Mar 24, 2010 | Epson Stylus Photo R200 InkJet Printer

1 Answer

Colors are off. Browns print green or purple. I

BROWN is made by mixing two of the three "primary" colours.
So, if the printer is out of RED ink, you'll get the "other" primary colour.

Print a "test" page, and verify that part of that page is RED.

Run a printer "cleaning" cycle, and consider replacing the RED cartridge.

Jan 08, 2010 | Canon i860 InkJet Photo Printer

1 Answer

How to print borderless 5 x 7 pictures using an HP psc 1310 series printer I'm using 5.0" x 7.0" hp premium glossy photo paper and a hp psc 1310 series printer and i cannot align the paper properly to...

Open printers window, right click on the psc printer icon , select printing preferences, click on paper\quality tab, select the paper size as 5x7, check the option as borderless printing and click on apply and then oK...
Try to print ,,,

Dec 07, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Red not printing

you try to change your cartridge
i hope i can solve your problem

Aug 30, 2009 | Canon PIXMA iP4000 InkJet Photo Printer

1 Answer

Replaced cartridges

Hi there :
on mine i had to use some rubbing alcohol and clean the new cartridge and the contact area on the p[rinter then reinstalled the cartridges and kept running the cleaner program and then about 15 sheets of paper later it finally cleared up and the color returned to normal and i had no more prohblems

Mar 07, 2009 | Canon PIXMA iP2000 InkJet Printer

1 Answer

Epson stylus photo 1290 printing black splodges

Once more have the printer to perform the ink nozzles cleaning.
If you are using a ontinuos ink system, place it at the same level than that of the printer.
With the printer in the "replace carrtidge position", put it OFF and by hand, clean the place at which the cartridge rest.
Good luck and merry christmas

Dec 22, 2008 | Epson Stylus Photo 1290 InkJet Printer

1 Answer

Hi We have Epson stylus photo 1290 for sublimation printing, and it keeps printing black splodges in the middle of prints, not in the same place each time, and not on every print. I can print a couple of...

Have the printer to perform the ink nozzles. If you have a continuos ink system place it at the same level than the printer.
Good luck and merry christmas.

Dec 22, 2008 | Epson Stylus Photo 1290 InkJet Printer

1 Answer

Prints suddenly red & cleaning doesn't help

The Color printer catridge ink might be low . You nned to replace.

Dec 15, 2008 | Canon i860 InkJet Photo Printer

2 Answers

Canon i860 won't print deep colors

I had similar problem: everything muted and with brownish tint. Tried everything, finally discovered that I installed wrong cartridge: 6PC instead of 6C. The "photo" cartridges are pretty much the same, make sure you have the right ones: 6C, 6M, and 6Y.

Nov 17, 2008 | Canon i860 InkJet Photo Printer

1 Answer

Ink not mixing properly, Magenta is taking over

return p/head and get a new may b contacts in machine

Jan 02, 2008 | Canon PIXMA iP3000 InkJet Photo Printer

Not finding what you are looking for?
HP PSC 1315 All-In-One InkJet Printer Logo

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts


Level 3 Expert

94198 Answers


Level 3 Expert

7983 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides