Question about Kodak ESP 3 Multifunction Printer/ Copier/ Scanner

1 Answer

Will not print, red light blinks under the paper symbol

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 101 Answers

Hello,

It means it has "paper jam"error message. This is a common issue w/ the ESP printers of Kodak especially if its brand new.


Try the steps below.


1.Open the printer access door.
2.Remove the black and color ink cartridges.
3.Reseat the printhead.

a. Lift the printhead release latch
b. Reseat the printhead, pushing firmly on the white label on the printhead (if provided) or the center of the printhead, until it clicks into place.

NOTE: You may also visit www.kodak.com/go/printheadsupport for demonstration on reintalling the printhead

4. Close the access door.
5. wait for the printer to initialize.

If issue persists, the printer itself needs to be replaced. Call 1.800.421.6699

Thanks

Neerak21

Posted on Sep 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a hp laser printer p2035 & the top symbol is blinking what is it?


This symbol represents a paper jam. Try removing the paper tray and opening any doors available to find the paper in question.

Oct 16, 2012 | Office Equipment & Supplies

1 Answer

What do symbols on top mean?


Welcome to Fixya

Half circle symbol means printer is in ready state. The printer control panel is comprised of six lights and two buttons. The lights produce patterns that identify the printer status.

1 Jam light: Indicates that there is a jam in the printer.
2 Toner light: When the print cartridge is low, the Toner light illuminates. When the print cartridge is out of the printer,
the Toner light blinks.
3 Paper out light: Indicates that the printer is out of paper.
4 Attention light: Indicates that the print-cartridge door is open or other errors exist.
5 Ready light: Indicates that the printer is ready to print.
6 Go button and light: Initiates action or indicates status.
7 Cancel button: To cancel the print job that is currently printing, press the Cancel button.

Thank you for using Fixya!

Feb 08, 2011 | HP LaserJet P2015dn Printer

1 Answer

Red paper and ink lights blinking


red paper light is blinked as it is indication that plz insert paper in your printer, and ink light blinks because your printer is low on ink, kindly get your printer cartage refilled.

Mar 19, 2010 | Epson Stylus 1400 InkJet Photo Printer

1 Answer

My MF 5700 has a red lamp blinking and notification-check paper size constantly, even when I restart it, wont print anything, paper size is ok...


If you are printed on it, check the paper size under printer properties, to "get rid" of blinking cancel job or print, copy and turn off and on

Jan 13, 2010 | Canon Office Equipment & Supplies

1 Answer

Paper light blinks so nothing will print. There is paper


look for a small switch or, a small red light (infared sensor) in the paper well (where the paper enters) repair the switch or, clean the lens of the sensor

Sep 09, 2009 | Brother Office Equipment & Supplies

1 Answer

Won't print. blinking red paper light flashing


This usually means your printer is out of paper or there is a paper jam somewhere.

Mar 25, 2009 | Brother HL-2040 Laser Printer

1 Answer

Blinking red error button


Blinking light can be caused by a multitude of problems, but in most cases it is caused by the little white switch that you see when you open the printer lid to install paper. Has to be replaced by a printer technician who can get the part from star micronics. Another cause is bad cutter or paper out switch located under lid at the back of printer in which the paper pushes the switch into the side of the printer. None of these problems can be solved by an end user.

Jan 15, 2009 | Star Micronics TSP600 Thermal Printer

1 Answer

Flashing light


Here is what HP has on the subject of the triangle light flashing:
c00028322.gif 1 - Attention Light 2 - Ready Light 3 - Go Light Figure 2: Printer light key c00028323.gif 1 - Symbol for light off 2 - Symbol for light on 3 - Symbol for light blinking
c00028328.gif Door open, media out, no print cartridge, or media jam

The printer is in an error state that requires operator intervention or help. Check the following:
  • The print cartridge door is completely closed.
  • Media is loaded.
  • The print cartridge is correctly installed in the printer.
  • There is no media jam.

Figure 8: Paper jam c00028328.gif 13.JJ.NT JAM IN TRAY 1

13.JJ.NT JAM IN TRAY X

The Attention LED is blinking. Check paper loading then open and close top cover.

When there is a jam in tray 1, verify the paper is loaded correctly, open and close the top cover. Pressing GO is ignored.

When there is a jam in tray X, verify the paper is loaded correctly, open and close the top cover. Pressing GO is ignored. These are the error explanations for just the flashing triangle light, there are many more, but none for just the flashing triangle.

If the light pattern is different let me know (other lights on as well)
-Hope this helps.

May 28, 2008 | HP LaserJet 1012 Printer

2 Answers

Error LED blinking after paper jam, won't print


I have a similar but different model B4300. Several others, & I have found that a small piece of paper 1/2 square may lodge under a plastic guide, holding open a switch. This is very difficult to notice if you don't know where to look.
Open top lid
Remove the ink cartridge/roller drum as a single unit.
Look in the printer at the metal roller in front.
A Plastic strip on top & in front of the roller covers 2 square holes which should look dark. On your LEFT, as you face the unit, there is a small magnetic switch, to the LEFT of the LEFT square hole, under the plastic.
In my case, the paper was seen as white in the hole, and extended under the switch. I was able to grasp it with a small medical forceps, next to the switch. By gently twisting, I pulled it out without taking the unit apart.
The printer then worked perfectly after the paper under the switch was removed.

Dec 13, 2007 | OKI B4100 Laser Printer

3 Answers

Samsung ML2510


Do you have paper in the tray? No paper loaded is one reason for the red light.

Apr 30, 2007 | Samsung ML 2010 Laser Printer

Not finding what you are looking for?
Kodak ESP 3 Multifunction Printer/ Copier/ Scanner Logo

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18409 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5189 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...