Question about Whirlpool Gold Duet GHW9400P 3.8 Cu. Ft. Front-Loading Washer

1 Answer

Whirlpool GHW 9400P

I have a problem with my Whirlpool GHW9400P. It's about year and a half old. When I try to start it, it looks like a normal cycle and right after it shows "F" on the screen and it beeps. I opened top part of the machine and I noticed that dispenser has numbers 1-2-3-4 and an indicator. When that indicator stops that is when fault comes on.

Posted by on

  • mandusic Dec 17, 2007

    It is actually showing "F" 11

  • mandusic Dec 21, 2007

    This with unplugging didn't work.

    Does anybody know what part i need to replace? Control panel board or microcomputer (manchine control).

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Hello! your problem is the motor control unit,MCU.
or the central control unit,CCU. Try unplugging the washer for a few minutes sometimes that will reset the unit.There is a tech sheet inside bottom of the washer cabinet.If youre not sure, may need a service tech.

Posted on Dec 17, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Normal cycle leave dishes half clean. Heavy cycle


in the bottom of the machine, under the bottom rack, is a screen looking piece. twist or just pull up, should be able to clean that then replace.

Aug 08, 2009 | KitchenAid 24 in. KUDP02CR Built-in...

1 Answer

Whirlpool Duet HT Blinking Lights at any cycle and won't work


get a repairman to look at them most likely the moters have either drawn moisture or stopped working period

Jun 22, 2009 | Whirlpool Gold Duet GHW9400P 3.8 Cu. Ft....

1 Answer

Whirlpool gold door falls open during cycle


You can probably get away with getting just hinges for the door if it is not bent also check the latch if it doesn't look broken the just go for the hinges.

Jan 11, 2009 | Whirlpool Gold Duet GHW9400P 3.8 Cu. Ft....

1 Answer

Whirlpool Duet Front Loading Washer Model GHW 9200 LW


what shoul I need to fix when the light sensing on and the dryer does not start ( it still hot ) .
Whirlpool dryer GEW9200LW
reply to tomagic3@yahoo.com
thanks

Dec 29, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

WHIRLPOOL DUET 9100 STOPPED UP DRAIN IN SPIN CYCLE F02 BLINKS.


I looked up a pic of a model ghw 9100 for you to look at as reference. There is a kick panel with three screws. Either a 1/4 inch socket or a torx T20.
6ggunmhr.png

Oct 16, 2008 | Washing Machines

2 Answers

Whirlpool infiniti washing machine


there is a lint trap ahead of your pump they clog you must remove the pump and clean it . two bolts and two hose clamps.

Aug 03, 2008 | Whirlpool Gold Duet GHW9400P 3.8 Cu. Ft....

5 Answers

Control locked on ghw920 can u help me unlock


Press and hold the End of Cycle Signal button for three seconds. This will turn off the Control Lock feature.

Jul 12, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool door is locked and it won't start


Try "the end of cycle" button for over 5 seconds, pressed down for 5 secs, ie. Then wait for 2 minutes & gently try the door.

Oct 19, 2007 | Whirlpool Gold Duet GHW9400P 3.8 Cu. Ft....

Not finding what you are looking for?
Whirlpool Gold Duet GHW9400P 3.8 Cu. Ft. Front-Loading Washer Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal De

Level 3 Expert

2694 Answers

yadayada
yadayada

Level 3 Expert

78238 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...