Question about Fuji FinePix J10 Digital Camera
My camra froze so I pushed the zoom in and now I tried to turn it on and the startup screen shows up then it goes black.....how can I fix this plz help me
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
just take out the battery ....charge it ...and put it back....switch off and switch on the camera once....should work fine
Posted on May 15, 2009
The lens Is trying to close properly but the focus mechanism has a problem, most likely jammed, so the lens cannot correctly close or work properly.
It will need to be opened up and reset.
Please email me. My email address is listed in my tips section on my profile.
Posted on Aug 28, 2009
SOURCE: Zoom error
The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.
Use these at own risk as it may further damage the camera.
Firstly , try connecting your ac adapter or usb cable.
Try holding the shutter button while switching on the camera.
Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).
Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.
Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.
Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.
Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.
If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.
You can also have a look at THIS link.
Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.
Posted on Oct 07, 2010
Tips for a great answer:
Mar 27, 2015 | Apple iPhone 5c
Jan 21, 2013 | Canon PowerShot G9 Digital Camera
Jul 27, 2017 | Sony Cyber-Shot DSCHX5 Digital Camera
May 20, 2010 | Kyocera Finecam M410R Digital Camera
Oct 31, 2009 | LG RUMOR Cellular Phone
Oct 28, 2008 | Cameras
38 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: