Question about NEC NP200 Projector

1 Answer

Lamp error; replaced lamp with known working lamp and still getting same error. newly purchased.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Posted on Aug 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Newly replaced lamp blew under 1 minute!


when you replaced the lamp were you wearing gloves,I hope so if not that could pop it.Other then that most likley a faultly bulb.

Dec 27, 2012 | Televison & Video

1 Answer

Carousel eats bulbs. second bulb is newly purchased. i have another one however need to know if 20 minutes per bulb is the norm? can there be an electrical surge killing these bulbs?


You didn't identify what model projector you have, but 2 things give REALLY short lamp life: 1. A "bump" when the lamp is illuminated and 2. contact resistance.
Chances are it is contact resistance, and you should replace the lamp socket. If you want to do it yourself, you can get parts from a factory-trained dealer or you can have them make the repair. Typically a lamp (depending on the style) should last between 15 and 35 hours of actual run time.

Dec 08, 2010 | Kodak Office Equipment & Supplies

3 Answers

Lamp goes out after a few minutes


my 3m projector switches off in 15 seconds indicating the lamp indicator, as the lamp has not been used enough

Mar 25, 2010 | Optoma HD80 Projector

1 Answer

I have error H 2, what to do?


This error indicates: H2-0 Fusing unit temperature error

Unless you are technically capable, you will want to have a qualified technician diagnose and repair.

If you want to try and diagnose it yourself, follow these directions.
You have to reset fuser errors with simulation 14. Push P * C * then 14 then Start (the button you use to make copies) and it should reset the code. If not then replace the fuser.
SM 5-1 should turn the lamp on. If lamp blinks on and off it is the thermistor, if it does not it is the lamp, but check the contacts on the lamp/fuser -- they have been known to erode.
Also check thermal fuse, if defective replace
***ALWAYS DISCONNECT POWER WHEN WORKING ON MACHINE***

Feb 03, 2010 | Sharp AL-2030 All-In-One Laser Printer

3 Answers

Sharp AR-5127 H2-00 code reset


Sharp Fuser
H2-0 Fusing unit temperature error
H4-0 The fusing unit doesn't heat up.
***ALWAYS DISCONNECT POWER WHEN WORKING ON MACHINE***
You have to reset fuser errors with simulation 14. Push P * C * then 14 then Start (the button you use to make copies) and it should reset the code. If not then replace the fuser.
SM 5-1 should turn the lamp on. If lamp blinks on and off it is the thermistor, if it does not it is the lamp, but check the contacts on the lamp/fuser -- they have been known to erode.
Also check thermal fuse, if defective replace.

Feb 01, 2009 | Office Equipment & Supplies

1 Answer

Sharp AL 800 won't copy. Blinking letter and number H 2


H2-0 Fusing unit temperature error
H4-0 The fusing unit doesn't heat up.
***ALWAYS DISCONNECT POWER WHEN WORKING ON MACHINE***
You have to reset fuser errors with simulation 14.
SM 5-1 should turn the lamp on. If lamp blinks on and off it is the thermistor, if it does not it is the lamp, but check the contacts on the lamp/fuser -- they have been known to erode.
Also check thermal fuse, if defective replace.



Jan 25, 2009 | Sharp AL 800 Copier

3 Answers

SHARP AR163 Displaying H2 error code


H2-0 Fusing unit temperature error
H4-0 The fusing unit doesn't heat up.
***ALWAYS DISCONNECT POWER WHEN WORKING ON MACHINE***
You have to reset fuser errors with simulation 14.
SM 5-1 should turn the lamp on. If lamp blinks on and off it is the thermistor, if it does not it is the lamp, but check the contacts on the lamp/fuser -- they have been known to erode.
Also check thermal fuse, if defective replace.

Dec 11, 2008 | Sharp AR-163 All-In-One Laser Printer

1 Answer

WD-52525 New lamp-Code 34-Lamp abnormality?


check that you did not bend you connections on the lamp housing
when you reinstalled have seem this happen

Nov 02, 2007 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
NEC NP200 Projector Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Office Equipment & Supplies Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

73698 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Are you a NEC Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...