Question about Mercury KVM800M Motherboard

1 Answer

How are the pins on the panel 1 header labeled?

There are 9 pins five on the bottom then 4 on top. pin 1 is lower left do they run across or is pin two on top of one?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 238 Answers

Hi, you have to assume that its a " D " symbol keeping the connector vertically then the first row has five pins and the second has four, the first pin in the first row is pin -1, and the first pin in the second row is pin-6, is it clear, let me know

Posted on Dec 17, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GT1T-M7 CONFIGURATION DIAGRAM NEEDED


http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=897&CategoryID=1&MenuID=16

It is my belief sir that you are referring to the ECS G31T-M7 (Version 1.0) motherboard. If I am incorrect please post back in a Comment.

Scroll down, and click on the Download tab.
(Features / Specification / Download / Support / FAQ / etc)

Now click on Manual.
(Driver / BIOS / Manual)

Scroll down, and click on the NAME of the country nearest yours.
There is the Motherboard User Manual in PDF file form.

For example;
The front of your computer is the Front Panel.
The area of contact pins on the motherboard, that the main wires from the Front Panel go to; is the Front Panel header.

Motherboard installed in computer case, with Processor to the Top, and Ram Memory slots to the Right; the Front Panel header is located at the Bottom/Right corner, to the left of the motherboard mounting hole.

F_PANEL
The Front Panel header pinout is on Page 29, of the PDF file.

There are 4 pins across the Top row, and 5 pins across the Bottom row.
The pins on Top are numbered EVEN.
The pins on Bottom are numbered ODD.

Starting on the LEFT side coming across to the Right side, Top row:
Pins 2, 4, 6, and 8. There is NO Pin 10.

Starting on the LEFT side coming across to the Right side, Bottom row;
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive activity LED. (Light)
Pin 1 is for the Positive ( + ) wire.
If the HDD LED is dim when the harddrive is active, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. Not Connected.
This is probably a 5 Volt + point, reserved for factory testing.

D) Pins 2 and 4 are for the Power On LED.
(Light. It is a Light Emitting Diode)

Pin 2 is for the Positive ( + ) wire.
If the PWR LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.

Jumper settings are shown, Front Panel port header's pinouts are shown, etc.

Do you have a specific question? Please post back in a Comment.
Regards,
joecoolvette

Dec 09, 2012 | Computers & Internet

1 Answer

How to connect power switch to mother board


http://www.intel.com/support/motherboards/desktop/dg41rq/sb/CS-029925.htm

Click on -
Intel Desktop Board DG41RQ Product Guide - English (PDF)

Bookmarks menu to the left -

1) Click on the + sign to the left of -
1 Desktop Board Features
Click right on - Desktop Board Components
Or go to Page 11. (Adobe Reader page number box at top)

Front Panel header location marked by P, in the figure.

2) Click on the + sign to the left of -
Connecting to the Internal Headers and Connectors,
in the Bookmarks menu.

Click on - Front Panel header

Motherboard mounted in computer case, the Front Panel header is in the bottom/right corner, above the top black SATA connector.
Two rows of contact pins.

The Top row is numbered EVEN.
Starting at the Left side going across to the Right, Top row;
Pins 2, 4, 6, and 8. There is NO pin 10.

The Bottom row is numbered ODD.
Starting at the Left side going across to the Right, Bottom row;
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive activity LED. (Light)
Pin 1 is for the Positive wire.
If the HDD LED is dim when the harddrive is active, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. Not Connected. Probably 5 Volts DC for factory testing.

D) Pins 2 and 4 are for the Power On LED. (Light)
This IS for a -> 2 wire LED. (Light)
Pin 2 is for the Positive wire.
If the PWR LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.

To the left of the Front Panel header is a 3-pin header.
This is the Alternate Front Panel LED header.
If you have a -> 3-wire LED, it connects here.

Also wanted you to have the motherboard manual.

Regards,
joecoolvette

Nov 04, 2012 | Intel DG41RQ Motherboard & Core 2 Duo...

1 Answer

How to connect front panel to acer power s290 motherboard


http://www.ascendtech.us/acer-aspire-sa90-mbs7109002-motherboard_i_mbacembs7109002.aspx

The front of your computer is the Front Panel.
The area of pins on the motherboard, that the main wires from the Front panel go to, is the Front Panel header.

Looking at the Front Panel header it is parallel to the outside edge on the bottom/right of the motherboard.

13 pin header.
6 across the Top row with 1 pin missing, 7 across the Bottom row.

Top row is numbered EVEN
Starting on LEFT side coming across to the Right, Top row;
Pins 2, 4, 6, 8, No Pin, 12, and 14.

Pins 2 and 4 have a Green area
Pins 6 and 8 have a Red area
No Pin 10.
Pins 12, and 14 have a Yellow area

Bottom row is numbered ODD.
Starting on LEFT side coming across to the Right, Bottom row;
Pins 1, 3, 5, 7, 9, 11, and 13.

Pins 2 and 4 have a Green area
Pins 6 and 8 have a Red area
No Pin 10.
Pins 12 and 14 have a Green area.

A) Pins 2 and 4 in the Green area (Top left) are for the Power On LED
Pin 2 is for the Positive ( + ) wire.
If the Power On LED is dim when the computer is on, switch the wires around.

B) Pins 6 and 8 in the Red area are for the Power On switch.

C) Pins 12 and 14 are N/C. Not Connected

D) Pins 1 and 3 in the Yellow area, are for the HarDDrive activity LED light.
Pin 1 is for the Positive wire.
If the HDD LED is dim when the harddrive is active, switch the wires around.

E) Pins 5 and 7 in the Purple area, are for a Reset switch, IF a Reset switch is used.

F) Pins 9, 11, and 13 are N/C.
(Pin 9 is 5 Volts DC. Used by the factory for testing)

Regards,
joecoolvette

(I thought the internal speaker was that round little 'buzzer', below the bottom white PCI slot, (PCI 2), and close to the edge of the motherboard )

Nov 01, 2012 | Acer Power S290 PC Desktop

1 Answer

MSI 760gm-p21(fx) MB, JFP1 AND JFP2 PINOUTS I NEED TO SEE A DIAGRAM SHOWING ME EXACTLY WHERE TO PLUG the cables on the MB


http://www.msi.com/product/mb/760GM-P21--FX-.html

Hover your mouse cursor on the Download tab.
(Overview/ Specification/ Download/ Support/ Where to Buy)

In the drop down list click on - Manual
On this page under the subheading Download, click on the blue -
M7641v3.0.zip
On the next page click on the country name nearest yours.

Motherboard User Manual.

This is a Zip file. If you do not know how to open a Zip file, please state in a Comment, and I will guide you.

The front of your computer is the Front Panel.
The area of contact pins on the motherboard, that the main wires from the Front Panel go to, is the Front Panel header.

The Front Panel header is divided into two headers on the motherboard.
This you have stated, JFP1 and JFP2.
(Junction Front Panel 1, and Junction Front Panel 2)

JFP1 is for the Power On switch, HarDDrive activity LED, Reset Switch, and a two wire Power On LED.

JFP2 is for an internal speaker/buzzer, and a three wire Power On LED. (Dual color)

JFP1:
4 pins across the Top row.
5 pins across the Bottom row.

The pins on the Top row are numbered EVEN.
The pins on the Bottom row are numbered ODD.

Starting on the LEFT side coming across to the Right side, Top row;
Pins 2, 4, 6, and 8. There is NO pin 10.

Starting on the LEFT side coming across to the Right, Bottom row;
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive activity LED.
Pin 1 is for the Positive ( + ) wire.
If the HDD LED is dim when the Harddrive is active, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. Not Connected. It is reserved for the factory to use.

D) Pins 2 and 4 are for a two wire Power On LED.
Pin 2 is for the Positive ( + ) wire.
If the PWR ON LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.
F) There is NO pin 10.

JFP2:
4 pins across the Top row.
3 pins across the Bottom row.

The pins on the Top row are numbered EVEN.
The pins on the Bottom row are numbered ODD.

Starting on the LEFT side coming across to the Right, Top row;
Pins 2, 4, 6, and 8.

Starting on the LEFT side coming across to the Right, Bottom row;
Pins 1, 3, and 5. There is NO pin 7.

A) Pins 1, 3 and 5 are for a dual color Power On LED.

Pin 1 is for the Negative ( - ) wire.
Pin 2 is for a Yellow, or Orange part of the dual color Power On LED.
Pin 3 is for a Green part of a dual color Power On LED.

B) Pins 2, 4, 6, and 8, are for a speaker/buzzer.

Pin 2 is for the Negative ( - ) wire of a speaker.
Pin 8 is for the Positive ( + ) wire of a speaker.

Pin 4 is for the Positive ( + ) wire of a buzzer.
Pin 6 is for the Negative ( - ) wire of a buzzer.

For additional questions please post in a Comment.
Regards,
joecoolvette

Jul 28, 2012 | MSI Computers & Internet

1 Answer

Do you have any user manual for front panel usb


http://www.msi.com/product/mb/PM8M-V.html

(MSI PM8M-V H, is version 2.0 )

Hover your mouse cursor on the Download tab.
(Overview / Specification / Download / Support / etc.)

In the drop down list, click on - Manual
Under the subheading - Download, click on the blue -
M7104v1.0.zip

[ This is a Zip file. A Zip file is a file that is compressed, to send easier. The above manual is for the M7104v1.0
It will work for the version 2.0 also.

You need a program to 'Unzip' it. (Decompress)
If WinZip is not working on your computer, go to 7-Zip, and download for free.
If you need guidance in downloading, and unzipping, post back in a Comment ]

There are two USB headers on the motherboard for the Front Panel,
JUSB1 and JUSB2. (Junction USB 1 and Junction USB 2)

Looking along the bottom of the motherboard, FROM the Right going towards the Left;

JFP1 header; (Front Panel main wires)
Header with 4 pins on the Top row, and 5 pins on the Bottom row.

JFP2 header; (Dual color Power On LED, and Speaker)
Header with 4 pins on the Top row, {Speaker}, and 3 pins on the Bottom row.

JUSB2 header.

JUSB1 header.

EACH USB header will support TWO USB ports in the Front Panel.
JUSB1 supports two,
JUSB2 supports two.

For each USB header there are 5 pins across the Top, 4 pins across the Bottom.
The pins are numbered EVEN across the Top, and ODD across the Bottom.

Starting from the LEFT side going across to the RIGHT side;
on the TOP row for JUSB2 and JUSB1;
Pins 2, 4, 6, 8 and 10.

Starting from the LEFT side going across to the RIGHT side;
on the BOTTOM row for JUSB1 and JUSB2;
Pins 1, 3, 5, and 7. There is NO pin 9.

A) Pin 2 is VCC
B) Pin 4 is USB1-
C) Pin 6 is USB1+
D) Pin 8 is Ground

E) Pin 10 is USBOC

Pin 10 is N/C -> Not Connected.
It is there, and Pin 9 is not there, to key which way a connector can go on. Only ONE way.

F) Pin 1 is VCC
G) Pin 3 is USB0-
H) Pin 5 is USB0+
I) Pin 7 is Ground

There is NO pin 9.

(The USB technology used is USB 2.0)

http://pinouts.ru/Slots/USB_pinout.shtml

Let's read together,
Under - USB pinout signals;

"USB is a serial bus. It uses 4 shielded wires: two for power (+5v & GND) and two for differential data signals (labeled as D+ and D- in pinout). NRZI (Non Return to Zero Invert) encoding scheme used to send data with a sync field to synchronise the host, and receiver clocks. In USB data cable Data+ and Data- signals are transmitted on a twisted pair. No termination needed. Half-duplex differential signaling helps to combat the effects of electromagnetic noise on longer lines. Contrary to popular belief, D+ and D- operate together; they are not separate simplex connections."

See the USB examples in the link above, where it labels the contact pins?
The MALE connectors are shown on the Left side.
The FEMALE connectors are shown on the Right side.

Your USB ports will be FEMALE, on the Front Panel.
They are also the A style. USB A style. The Top example to the Right.

Just noting the following in case for some reason, the wires coming from those contact pins in the female USB connector, are not color coded correctly;

Even after you have the wires sorted out, as to which contact pins they go to, DOUBLE-check again. Do NOT just go by the color code of the wires.
Why?

You do NOT want to accidentally connect the +5 Volts (VCC), to the Ground!

Explaining further;
You connect the VCC wire, (Red), of the USB port in the Front Panel, to the Ground pin on the USB header on the motherboard.

(Which means the Ground wire of the USB port, (Black), will probably also be connected to the VCC pin, on the USB header of the motherboard)

Zzzzzzap! There goes your front USB ports. Both USB front panel headers on the motherboard, will be DONE!

Make sure!

Going on;
1) VCC or Vcc, goes back relating to Transistor technology.
Just think of it as the Positive, or power wire.
It is.
It is 5 Volts DC.

2) GND is Ground. It's a DC circuit, and you have a Positive, and a Negative, or Ground.

3) USB1-
That is -> Data-

USB0 is for one USB port in the Front Panel.
USB1 is for another USB port in the Front Panel.

[ Each USB header on the motherboard can be connected, to TWO USB ports on the Front Panel.
Therefore for the two JUSB1 and JUSB2, you can connect Four USB ports in the Front Panel ]

Data- on one USB port in the Front Panel, goes to USB0-

Data- on the other USB port in the Front Panel, goes to USB1-

4) Data+
Same thing.
Data+ on one of the USB ports in the Front Panel, goes to USB0+
Data+ on the other USB port in the Front Panel, goes to USB1+

EACH side of JUSB1 and JUSB2, will support one USB port on the Front Panel.
Two sides per JUSB1 and JUSB2 = 4 USB ports on the Front Panel.

For additional questions, or clarification to anything I have stated above, please post in a Comment.

Regards,
joecoolvette

Jul 20, 2012 | MSI Computers & Internet

1 Answer

Front panel configuration


Motherboard installed in computer case;
Processor to the Top, 3 Ram Memory slots to the Right, 5 white PCI slots to the Bottom;

Down in the Bottom/Right corner, is JFP1, and JFP2.

The Front Panel header is JFP1. (Junction Front Panel 1)
The header with two rows of pins, and is positioned Horizontal. It is parallel to the bottom of the motherboard.

(The other Front Panel header is JFP2. It is positioned Vertical, and is above JFP1. You may be using it also. Read on)

There are two rows of pins for JFP1.
5 across the Top, 4 across the Bottom.

The pins on the Top row are numbered ODD.
The pins on the Bottom row are numbered EVEN.

Top row, starting from the Right side, going towards the Left;
Pins 1, 3, 5, 7, and 9.

Bottom row, starting from the Right side, going towards the Left;
Pins 2, 4, 6, and 8. There is NO pin 10.

A) Pins 1 and 3 are for the HarDDrive activity LED light.
Pin 1 is for the Positive ( + ) wire.
If the Harddrive activity LED light is dim, when the harddrive is active, switch the wires around.

B) Pins 5 and 7 are for the Reset switch, IF a Reset switch is used.

C) Pin 9 is N/C. Not Connected. It is/was for the factory.

D) Pins 2 and 4 are for the Power On LED light. A Power On LED light that has 2 wires.
Pin 2 is for the Positive ( + ) wire.
If the Power On LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.

Looking at JFP2. (Junction Front Panel 2)
Vertical with two columns of pins.
3 on the Right side, 4 on the Left side.

The Right side is numbered EVEN.
The Left side is numbered ODD.

Starting at the Bottom on the Right side, going Up;
Pins 1, 3, and 5.
Starting at the Bottom on the Left side, going Up:
Pins 2, 4, 6, and 8.

A) Pins 1, 3, and 5, are for a Power On LED light, that has 3 wires.
Pin 1 is for the Positive wire. (Dual color LED )

B) Pins 2, 4, 6, and 8 are for a Speaker. The speaker for BIOS Beep Codes.
Pin 2 is for the Positive ( + ) wire.
Pin 8 is for the Negative ( - ) wire.

Regards,
joecoolvette

Jun 24, 2012 | MSI MS-6580 Motherboard

1 Answer

How to re-wire a Compaq Presario SR2150NX Case power Switch


The plastic front of your desktop computer is the Front Panel.

The area of contact pins on the motherboard, that the wires from the Front Panel go to, is the Front Panel header.

F_PANEL_1

The Front Panel header contains connections for the Power On switch, Power On LED light, HarDDrive activity LED light, and so on.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00864922&tmp_task=prodinfoCategory&cc=us&dlc=en&lang=en&lc=en&product=3339274

(Look at the motherboard photo. The Front Panel header is at the bottom right. Scroll down for the motherboard illustration )

There are 9 contact pins.
4 across the Top row, and 5 across the Bottom row.

The four pins across the Top row are numbered EVEN.

From the Left side going towards the Right side;
Pins 2, 4, 6, and 8. There is NO pin 10, just a blank spot.

The five pins across the Bottom row are numbered ODD.
Pins 1, 3, 5, 7, and 9.

A) Pins 2 and 4 are for the Power On switch

B) Pins 6 and 8 are for the Power On LED

(LED is dim when the computer is on? Switch the wires around )

C) Pins 1 and 3 are for the HarDDrive activity LED

(LED is dim when the harddrive is operating? Switch the wires around)

D) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

How to know which wires are for the Power On switch, Power On LED, and HDD LED?

Follow the wires into the Front Panel. Remove the Front Panel, and follow them.
(Need guidance removing the Front Panel post in a Comment )

For additional questions please post in a Comment.

Regards,
joecoolvette

May 02, 2012 | HP Compaq Presario SR2150NX PC Desktop

2 Answers

How to connect power to the front panel


Power to the Front Panel?

A) The plastic front of your computer is the Front Panel

B) The area of pins sticking up on the motherboard, that the wires from the Front Panel go to, is the Front Panel header.

I believe what you are requesting is the Front Panel header pinout.

AsRock Support > AsRock 775i65GV Motherboard > Main Support Page,

http://www.asrock.com/MB/overview.asp?Model=775i65GV

Go to the headings on the upper left side.
Products, Motherboard Series, 775i65GV, Overview and Specifications, and so on. Click on - Manual

On the next page go across from the heading - User Manual, and click on - Click Here, under the country nearest yours.

Disregard if you are aware;
This is a PDF file. The computer you are using now has Adobe Reader on it, which uses PDF files.
After you click it may take up to 30 seconds before the first page comes up.

At the top of the PDF file is the page number box. It is to the right of the Down Arrow.
You can use the Down Arrow to arrive at the page you want, or;

1) Put your mouse cursor in the page number box.
2) Left-click once. (Contents in page number box will be highlighted in blue)
3) Type the page number you want in the page number box.
4) Press the Enter key

Go to Page 10
This page shows an illustration of the motherboard, and as it sits in your computer case.
To the bottom Right corner is the Front Panel header. It is marked by the number - 16 [ System Panel Header ( PANEL_1) ]

{ It is the second header over from the Right side. It is Black in color. The first header is a USB header, and it is Blue }

Now go to Page 22. Front Panel Header Pinout. (System Panel Header pinout)

If you cannot download this motherboard manual, or if you do not understand the pinout;

There are 4 pins across the Top row.
There are 5 pins across the Bottom row.

The Top row of pins are numbered Even
The Bottom row of pins are numbered Odd.

Starting at the LEFT side going to the Right, on the Top row;
Pins 2, 4, 6, and 8.

Starting at the LEFT side going to the Right, on the Bottom row;
Pins 1, 3, 5, 7, and 9.

A) Pins 1 and 3 are for the HarDDrive Activity LED light.
Pin 1 is for the Positive ( + ) wire.
IF the LED light is dim when operating, switch the two wires around.

B) Pins 5 and 7 are for a Reset Switch, IF, a Reset switch is used.
Pin 5 is for Ground ( - )

C) Pin 9 is Not Connected. (N/C)

D) Pins 2 and 4 are for the Power On LED light.
Pin 2 is for the Positive ( + ) wire.
If the LED light is dim, switch the two wires around.

E) Pins 6 and 8 are for the Power On switch.

Page 21 details out the USB front panel headers, (USB 2.0 Header, Shared USB 2.0 Header), and the Front Panel Audio Header.

For additional questions please post in a Comment.

Regards,
joecoolvette

Dec 26, 2011 | Asrock 775i65GV Motherboard

1 Answer

I took the front off the e machine w2888 desktop but did not notice the three wires was not one plug, what order and colored wire up or down. Their is a pwr led, pwr s/w, hdd led wire. Thanks Jerry


The eMachines W2888 uses an Intel D845GVSR motherboard.

This is the download page for the Intel D845GVSR motherboard manual, (Product Guide),

http://www.intel.com/support/motherboards/desktop/d845gvsr/sb/cs-008823.htm

Left-click on the first file name in blue -
Intel Desktop Board D845GVSR - Product Guide (PDF)

This is a PDF file. The computer you are using has Adobe Reader on it, which uses PDF files.
After you click on the above file name it may take up to 30 seconds before the first page comes up.
It may also take additional time for the file to fully download.

[ Took 4 seconds to see the first page come up, just now. File was fully downloaded ]

At the top of the PDF file is the page number box. It is to the right of the blue Down Arrow.
This is the page number I will be referring to, and may not be the actual page number of the manual.

Go to Page 11.

This shows an illustration of the motherboard looking down at it from the top.
The letter S points to the Front Panel header.

[The plastic front of your computer is the Front Panel.

The area of pins on the motherboard that the cables (Wires) go to from the Front Panel, is the Front Panel header ]

Looking at the motherboard with the Processor to the top, Ram memory slots to the right, and the white PCI slots (3) to the bottom, the Front Panel header is located parallel to the bottom right edge of the motherboard.

(The illustration has the motherboard sitting on it's right side.
Not the direction it is sitting in your computer.
In your computer the motherboard is sitting as described above )

Now I would like you to go to Page 31.
This illustration shows the various internal headers on the motherboard.
The letter C points to the Front Panel header. (J9G1)

Note that the pins in the Front Panel header are labeled with numbers.
(Pinout)

There are 4 pins across the top.
There are 5 pins across the bottom.

Starting from the Left side of the motherboard, going towards the right, across the Top of the Front Panel header;

Pins 2, 4, 6, and 8.

Starting from the Left side of the motherboard, going towards the right, across the Bottom of the Front Panel header;

Pins 1, 3, 5, 7, and 9

Page 32: Front Panel Header

A) Pins 1 and 3 are for the HarDDrive activity LED light. (HDD LED)
Pin 1 is for the Positive ( + ) wire.

If the LED light is dim when operating, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF used.
Pin 5 is for the Ground ( - ) wire.

C) Pin 9 is for a 5 Volt wire. (It's probably Red in color, IF used)

D) Pins 2 and 4 are for the Power On LED light. (Light Emitting Diode)

E) Pins 6 and 8 are for the Power On switch. (The Power On switch is located inside the plastic Power On button assembly)

F) Pin is N/C. Not Connected.

For additional questions please post in a Comment.
Regards,
joecoolvette

Jul 10, 2011 | E-Machines eMachines Desktop PC

2 Answers

Need where pwr sw and pwr led and hdd led plug onto au31 motherboard


Here is a link for the manual for your au31 motherboard. The diagram explaining the front panel headers is on page 12.

http://www.lurkhere.com/~nicefiles/AU31_manual.pdf

Dec 02, 2009 | E-Machines T3092 PC Desktop

Not finding what you are looking for?
Mercury KVM800M Motherboard Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Computers & Internet Experts

Mark Gough

Level 3 Expert

415 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

569 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you a Mercury Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...