Question about HP DeskJet 5650 InkJet Printer

2 Answers

I changed my ink cartridge, but the top cover won't close properly, and I keep getting a "cover open" error message---i am pretty sure the cartridge is in the right way. suggestions?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Lift the printer cover. There is a slot on the right side by the ink cartridges. Push the end of your little finger into the slot. Close the lid. I know this sounds lame, but it has helped me many times. It seems the latch will stick and this usually unsticks it.

Posted on Oct 08, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 30 Answers

Make sure cartridges are installed properly, and check the cradle

Posted on Sep 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My printer keeps telling me that I haven't closed the ink cartridges door


The ink catridge door sensor as been damaged.
Clean d sonsor and check sensor connecting wire

Jul 14, 2016 | Office Equipment & Supplies

1 Answer

Cannot recognized ink in my canon pixma ip2770


i am having canon pixma ip 2700 inkjet printer. it worked properly till. I got refilled both cartridge and fix it in my printer but the cartridge was not recognized. i had tried installing the cartridge many times and also tried switch off and on it again many times but the printer shows the same error that "An error occurred.Some ink cartridges cannot be recognized." and a message box is opened and it shows that "An ink cartridge is not installed properly.Open the printer's cover, make sure the ink cartridge is installed properly, and close the cover." help me to recover from this problem i can't afford to buy new cartridges. suggest me some ideas and procedures to

Aug 31, 2012 | Canon Office Equipment & Supplies

1 Answer

I have tried replacing all ink cartridges with brand new ones but it keeps saying Error U052 ? I am not really sure why it won't recognize the ink cartridges especially because they are from Canon


The error code indicated, the print head is defective, so it will not get solve by replacing any number of cartridges. Just follow the steps below to reseat the print head, if that does not help, then replace the print head.

  1. Confirm that the printer is powered on and press the <Open> button. (The paper output tray will open.)

    mp800_openbutton.gif

    *MP800R shown

  2. Lift the scanning unit (printer cover) completely. (The print head will move to the replacement position.)

    mp500_scanningunit_open.gif

    Note: When the scanning unit (printer cover) is opened more than ten minutes, the print head moves to the right side. If this occurs, close the scanning unit (printer cover), and open it again.

  3. Open the inner cover.

  4. Remove the ink tanks by pressing the tab of each tank.


    Caution: Handle the ink tanks with care so that your clothes and surrounding area do not get soiled. Make sure to remove the ink tanks one by one.

    05sj00142_01_en.gif

  5. Raise the print head lock lever.

  6. Tilt the print head slightly towards the front of the machine and lift out gently.

    03rq02455_02.gif

    Caution: Do not touch the print head nozzles <1> , electrical contacts <2>, or ink supply ports <3>. Doing so may cause printing problems.

    mp_500_ph_contacts.jpg

  7. Place the print head in the print head holder and lower the print head lock lever carefully until you hear a click.

  8. Insert ink tanks into the print head.

    03rq02454_04.gif

  9. Press the mark <PUSH> on the ink tank firmly until you hear a click.

    05sj00141_08_en.gif

  10. Ensure that all the ink tanks are installed properly and the ink tank lamps light red.

    05sj00141_09_en.jpg

    <7> The ink tanks are installed properly.
    <8> The ink tanks are not installed properly.

    Note: Click for Ink Tank Lamp indications.

  11. Close the inner cover and the scanning unit (printer cover).

    Caution: When closing the scanning unit (printer cover), be careful not to jam fingers.

    N
    ote: The next printing begins, the print head cleaning will begin automatically.

Ink Tank Lamp indications

You can check the status of each ink tank according to the way its lamp flashes.

- On: The printer is ready to print.

- Slow flashing (at about three second interval): Ink is low. Prepare a new ink tank.

- Fast flashing (at about one second interval): Ink tank is empty, or the printer is not ready due to an error.

- Off: An error has occurred and the printer is not ready to print.

Aug 28, 2012 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Hi I have just put in ink cartridges and the reg light check print cartridges keeps flashing is there anyone there to help me


Hello and Welcome to FixYa!
Sir/Ma'am If the Check Print Cartridge message is shown and Red Light Flashing then it means that Either ink Cartridge is not installed properly or the function for detecting the ink level is disabled. For it Make sure that you install ink cartridges at correct position as indicated by the label on the print head holder. Press push mark until ink cartridge click into the place.
If you are sure then you have installed ink cartridge properly then try following to stop the flashing of red Light.
  1. Lift the lid to the printer (cartridges are on the right side.)
  2. Turn the printer off, then power it on again.
  3. Unplug the power cable from the back of the printer when the grinding noise starts.
  4. Move the carriage towards the middle of the printer (this procedure may take a couple of tries to get the timing correct.)
  5. Take out the cartridges and close the top cover.
  6. Reconnect the power cord. The power and the resume lights (green and red) should be on.
  7. Open the top cover, reinstall the cartridges, and close the top cover.
Now Turn On the printer, Mostly this issue is resolved by this,
But if still you get the message and red light still flash then surely its an issue of Ink Cartridge, your ink Cartridge is defective, You need to change the ink cartridge, Your problem will be solved.
I hope this solution helps you.Don't hesitate to let me know if you still have some confusion in your mind.
Please Rate my solution as "Maximum Stars" and then give your Words of Appreciation as a Feedback.
Thank you Sir/Ma'am for taking my service and fir using FixYa
Concerned: Muhammad Uzair Team : FixYa

Nov 05, 2011 | HP DeskJet 920c InkJet Printer

2 Answers

I changed my ink but it wont let me print it keeps saying i need to change my ink why?


What is the version of your ink cartridge? It could be that it's not seated properly in the cartridge carrier. Open the printer cover and remove the cartridges. Close the cover. Unplug and replug the printer into the power outlet in the wall to reset it. When the printer turns on, open the printer cover and reinsert one cartridge first. Close the cover. If no error, open the printer cover and reinsert the other cartridge. Replace whichever cartridge is causing the error to appear. You could also try to insert a different known working cartridge to determine if the other is faulty.

May 19, 2011 | Lexmark Z2300 InkJet Printer

2 Answers

Hey,I am a big problem.When I want to print...something, I can't print because I have an error. Look here what "the printer" sais:"An ink cartridge is not installed properly.Open the...


this like your cartridge has problem with connection
open printer cover/door
then disconnect your printer cartridge, both the color and black, then connect the cartridge again
close the printer cover/door
try to print again, if message still appear, it mean you need to change your cartridge with new one

Mar 17, 2011 | Canon PIXMA iP1300 Printer

1 Answer

My epson stylus cx6000 printer keeps showing -(install the ink cartridges) and I have already put in new ones. The code is E-02.


f you have just installed a new cartridge and you still see an ink related error message, the cartridge may be incorrectly installed. Follow these steps to make sure the cartridges are correctly installed:

  1. Make sure the Stylus CX is turned on.


  2. Check the photo viewer screen to determine which cartridge is incorrectly installed. Then do one of the following:


    • If printer shows the ink cartridge is expended, press the cp_button_6.gif Start button.


    • If the printer shows the cartridge is low on ink, press the Setup/Utilities button. Press the cp_button_41_er.gif or cp_button_42_er.gif button to select Press Start to change cartridges. Then press the cp_button_6.gif Start button.


  3. Press the cp_button_6.gif Start button again.


  4. Lift up the scanner, then open the cartridge cover.


alert_caution.gif Caution:
Never attempt to open the cartridge cover when the print head is moving. Wait until the cartridges have moved to the replacement position.

  • Press down all the ink cartridges until they click into place to make sure they are properly seated.


  • alert_note.gif Note:
    If a cartridge is properly seated already, you may not hear a click.

    im_337_er.gif

  • Close the ink cartridge cover and press it until it clicks into place.


  • Close the scanner.


  • im_339_er.gif

  • Press the cp_button_6.gif Start button. The Stylus CX charges ink for about one minute and displays Charging Ink on the photo viewer screen until charging is finished.


  • alert_caution.gif Caution:
    Never turn off the Stylus CX while the Charging Ink message is displayed or you'll waste ink.

  • Press the Setup/Utilities button to return to the previous mode, if necessary.
  • Aug 26, 2009 | Epson Stylus CX6000 All-In-One InkJet...

    1 Answer

    I recently replaced the magenta cartridge in my HP 3210 Photosmart printer because the light indicated it needed to be replaced. However, the printer still won't print, and the message still says that I...


    Hi,
    If you turned the machine off and replaced the cartridge, you can get this error.

    Could you try the following procedure below please to clear the error, thanks.
    1. Turn on the unit.
    2. Open the top cover to access the print cartridges.
    3. Remove the new cartridge that is causing the message.
    4. Reinsert the cartridge and close the cover. The following message will appear on the front panel: "Press 1 for new cartridge or press 2 for a used cartridge."
    5. Press the 1 on the numeric keypad of the HP product.
    If the message, press 1 for new cartridge or press 2 for a used cartridge, "does not appear after removing and reinstalling the new cartridge, and the low ink warning message still displays,

    follow the steps below:
    1. Turn on the unit.
    2. Open the top cover to access the ink cartridges.
    3. After the cartridges stop moving, unplug the power cord.
    4. Remove both cartridges and close the top cover.
    5. Plug the power back in. The unit will reinitialize and a message will appear to insert the cartridges.
    6. Open the top cover and reinsert the ink cartridges. Close the top cover. The message,
    7. Press 1 for new cartridge or press 2 for a used cartridge," should appear.
    Hope this helps
    Regards.

    Apr 18, 2009 | HP Photosmart 3310 Printer

    3 Answers

    Ink cartridges cannot be recognized in canon printer


    Hello!
    Remove the cartridges and gently wipe the cartridge contacts with a dry cloth, then put them back in. Then, hold the "resume" button for 10 seconds for each cartridge, that should reset them.
    If that doesn't work, one of your cartridges (sadly) needs to be replaced.

    Apr 15, 2009 | Canon PIXMA iP1300 Printer

    4 Answers

    Printhead problem (black/yellow) on HP L7780


    When you removed the paper it's possible your damaged it and that's why the message is not going away. Did you try to put the cartridge back in to make sure it had not come out of position and just remove the power cord for a minute then plugging it back it.

    Here are the steps to make sure you properly change the cartridges and the heads...

    Install the ink cartridges and printheads Step one: Install the ink cartridges All four ink cartridges must be correctly installed for the HP All-in-One to work. Follow the steps below to Install cartridges:
    1. Open the ink cartridge cover.
    2. Remove each ink cartridge from its package.
    3. Align each ink cartridge with its color-coded slot and then insert the ink cartridge into the slot. To ensure proper contact, press down firmly on the cartridges until they snap into place.
    4. Close the ink cartridge cover.
    Figure 1: Installing cartridges c00841893.gif 1 - Open the ink cartridge cover. 2 - Remove the ink cartridges from the packages. 3 - Install the ink cartridges. 4 - Close the ink cartridge cover. Step two: Install the printheads Follow the steps below to install the printheads.
    1. Open the top cover of the printer. Figure 2: Open the top cover c00848391.gif
    2. If the carriage does not move to the left automatically, press and hold the Resume button (c00847980.gif ) for three seconds. Wait for the carriage to stop moving.
    3. Remove the cardboard cover from the printhead carriage. Figure 3: Remove the cardboard cover c00848392.gif
    4. Lift the printhead latch. Figure 4: Lift the printhead latch c00848393.gif
    5. Before installing a printhead, shake the printhead up and down at least six times while the printhead is still in its packaging. Figure 5: Shake the printhead while it is still in its packaging c00847983.gif
    6. Remove the new printhead from its package, and then remove its orange protective caps. CAUTION: Do not shake printheads after the caps are removed. Figure 6: Remove the printhead from its packaging, then remove the orange caps from the printhead c00847984.gif
    7. Insert the printhead into its color-coded slot. The label on the printhead must match the label on the printhead latch. Press down firmly on the printhead to ensure proper contact. Figure 7: Insert the printheads in the correct color-coded slots c00847985.gif
    8. Pull the printhead latch all the way forward, and then press down to ensure that the latch is properly engaged. You might have to apply some pressure to engage the latch. Figure 8: Close the latch c00848394.gif
    9. Close the top cover. Figure 9: Close the top cover c00847987.gif
    Step three: Align the print heads Whenever you insert or replace a printhead, the printer automatically aligns the printheads to ensure the best print quality. If the printer does not print the alignment page automatically, start the alignment process manually. To start the alignment process manually:
    1. Press the Setup button on the control panel Setup and the number 6 on the keypad or scroll to Tools .
    2. Press 4 on the keypad or scroll to Align Printer . The alignment process starts.

    Dec 01, 2008 | HP Officejet Pro L7780 All-In-One InkJet...

    Not finding what you are looking for?
    HP DeskJet 5650 InkJet Printer Logo

    405 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top HP Office Equipment & Supplies Experts

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Seeker5211
    Seeker5211

    Level 3 Expert

    1089 Answers

    kakima

    Level 3 Expert

    102366 Answers

    Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...