Question about Dell 1600n All-In-One Laser Printer

Open Question

I have a Dell 1600n with error message Document Jam cannot find any obstructions. Need solution

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

flopez
  • 161 Answers

SOURCE: Dell 1600 paper jam 1 or no cartridge

Your unit is actually manufactured by Samsung. Most probably you have a bad paper sensor. As a technician, you will find these sensors on the power supply board (SMPS)or main board. If your are receiving tech support from Dell, please illustrate those guys on how to do their job.

Posted on Oct 02, 2007

  • 1 Answer

SOURCE: Document Jam in Dell 1600n

The Automatic Document Feed (ADF) has a white rubber pad that wears out. You can find it by opening the ADF cover and removing the roller bar. Under that is the white rubber pad. Pinch the sides together and the assembley comes out. Contact Dell for the replacement. You may also refer to the Dell 1600n Owners Manual for instructions.

Posted on Jun 19, 2008

techprogrami
  • 57 Answers

SOURCE: grey arm is in place. cannot find any paper anywher that is a jam

this can happen if any of the contact points on the cartridge are even remotely scratched or if the cartridge is "low" even if it doesnt say its low

Please Rate Me

Posted on May 28, 2009

  • 49 Answers

SOURCE: my Dell 1600n Laser Printer gives message Open

Just call Dell Tech support. It's in their policies that if you call them and complain about a heat issue, they'll replace the unit for safety reasons.

Cheers.

Posted on Mar 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Dell 1600n Laser Printer gives message Open Heat Error


Just call Dell Tech support. It's in their policies that if you call them and complain about a heat issue, they'll replace the unit for safety reasons.

Cheers.

Dec 07, 2009 | Dell 1600n All-In-One Laser Printer

1 Answer

Dell 1600n laser printer has error message of document jam


the automatic document feeder has a few sensors on it, most likely one of these has become displaced, ofter they are just clipped in so if you are handy with a screwdriver lift the lid and remove some screws from the bottom of the document feeder and gently dissasemble, not expert at this model but take it slowly or get someone handy to do it, once youve got to the circuit board in the automatic document feeder the problem will be one of the arms that breaks the beam in the optical sensor (black U shape) should just clip back in and problem solved.

Sep 25, 2009 | Dell 1600n All-In-One Laser Printer

1 Answer

Grey arm is in place. cannot find any paper anywher that is a jam


this can happen if any of the contact points on the cartridge are even remotely scratched or if the cartridge is "low" even if it doesnt say its low

Please Rate Me

May 28, 2009 | Dell 1600n All-In-One Laser Printer

1 Answer

Jam msg will not clear ? no paper in path?


when you removed the paper, a small piece might still be stuck somewhere or the sensor might have remained in the on position.

May 19, 2009 | Dell 1600n All-In-One Laser Printer

1 Answer

Dell 1600N warming up message


Hi Unplug the printer power cable from the wall and disconnect it from the printer as well. Turn the printer power switch on for 15 seconds. This will reset the printer. Turn the printer power switch off and plug the cable back in on both ends. Then turn power on. The Document Jam error should be eliminated.

Please keep in mind you must check for any small pieces of paper or look for a real paper jam prior to completing the steps above.

I hope that helps.

Sep 16, 2008 | Dell 1600n All-In-One Laser Printer

3 Answers

Document Jam in Dell 1600n


The Automatic Document Feed (ADF) has a white rubber pad that wears out. You can find it by opening the ADF cover and removing the roller bar. Under that is the white rubber pad. Pinch the sides together and the assembley comes out. Contact Dell for the replacement. You may also refer to the Dell 1600n Owners Manual for instructions.

Jun 14, 2008 | Dell 1600n All-In-One Laser Printer

1 Answer

Dell 1600N Multifunction printer problem.


Fuser issues - if problem is reoccuring then you are looking at more expense, are all vents free of obstructions (folders leaning on machine sides/rear) is machine being flogged, is power supply consistent, maybe even fuser bought was faulty, many options, try doing a warranty claim on fuser or replace again, even better get another printer, welcome to our throw away world!

Oct 31, 2007 | Dell 1600n All-In-One Laser Printer

Not finding what you are looking for?
Dell 1600n All-In-One Laser Printer Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Office Equipment & Supplies Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

color wheel light...
color wheel light...

Level 2 Expert

138 Answers

Are you a Dell Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...