Question about Whirlpool Duet GHW9150P Front Load Washer

3 Answers

Can the Whirlpool Duets stack? - Whirlpool Duet GHW9150P Front Load Washer

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 704 Answers

The simple, short answer is yes, the Whirlpool Duet washer and dryers can be stacked. You'll need to check with the Whirlpool folks to see if you'll need a stacking kit, or if they are ready to go with what you already have.

The key to stacking these Duet laundry pairs, is to have both the washer and dryer model numbers when you contact Whirlpool, so they can provide you with the stacking kit needed to mount the dryer on top of the washer. You can also check the Whirlpool web site to get a good idea of how much space is needed for a stacked set. Here's the link for the space checker, just look under the Guides and Tools on the left side and click on the Laundry Space Sizer to see what's needed.

http://www.whirlpool.com/catalog/category.jsp?cat=115

You can also call Whirlpool at (866) 698-2538 and speak to them about your particular washer and dryer.

Hope you find this Very Helpful and best regards!

Posted on Sep 25, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Yes - with the proper stacking kit.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 30, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We stacked ours, it works quite well and was simple(other than lifting the dryer). The kit is pretty much a roll of tape/foam rubber to put on the bottom of the dryer. It was very straight forward.

Posted on Mar 09, 2013

  • darrenkrumla
    darrenkrumla Mar 09, 2013

    We stacked ours, it works quite well and was simple(other than lifting the dryer). The kit is pretty much a roll of tape/foam rubber to put on the bottom of the dryer. It was very straight forward.

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mc1bean
  • 3053 Answers

SOURCE: whirlpool duets HT dont't spin

Hello, louie

I am trying to help you out here. Maybe this will help some? I am know on Fixya as the cleanup expert pro. Which means I spend my own personal time to seek out customers that maybe have not had there problem yet solved by the other fantastic great experts. I do this on my own for free. Think of me as a Specialized Trouble Shooter.

I have found out that it appears that lots of customers appreciate my efforts and help. So, I thought I would take some of my own personal time
to see if I can help you. Even though this Informational site may not have your exact model or brand, But this site will help you a lot. Here is the site link about everything you want to know about washing machines and possibly yours, from repair to trouble shooting it.

http://home.howstuffworks.com/how-to-repair-a-washing-machine.htm


Please if this helped you at all, if you can find the time and in your heart to rate my help and some kind words written would be appreciated for my free help, I would appreciate it. Like I said I just try to help, If anything this is good information for future problems. If you felt that my free help was a waist of time for you, I'm sorry. I do not get paid to help people on the site, I do it cause I like to help and maybe make a smile on someones face.

Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive, Appliance, and Electronics. Drop In anytime for my help.


http://beta.fixya.com/users/mc1bean

Thanks Mike

Posted on Nov 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you stack this washer and dryer?


You can stack, will you be able to reach. Racks can be made to stack any normal washer and dryer.

Mar 14, 2016 | Whirlpool WFW9750WW Duet Steam Front Load...

1 Answer

Can I stack a new whirlpool washer model # WFW72HEDW with an old whirlpool dryer model # WED9270XW1? If yes, what stacking kit do I need to use?


You can stack just about any dryer on any washer, so long that the controls of the washer are on the the top of the washer has no penetrations and no control.In general, dryers are independent from the washer and are light weight.
So the conclusion: so long that the dryer does not interfere with operating the washer - YOU ARE A OK :-)

Oct 14, 2014 | Whirlpool 8541503 Duet Stack Kit 8541503

1 Answer

Can I stack a new whirlpool washer model # WFW72HEDW with an old whirlpool washer model # WED9270XW1? If yes, what stacking kit do I need to use? Can I stack a new whirlpool washer model # WFW72HED


As we could see new one are not compatible with older one as size and dimension of new washer are changed but in case you could try .It is simple just try compatibility of your older washer stack kit with new one in most new model

Oct 14, 2014 | Whirlpool 8541503 Duet Stack Kit 8541503

2 Answers

My Whirlpool duet washer lights flash/beep


probably your door then, look at the door itself, at the latch is it broken? should form a complete square hole with four sides. if broken some part is probably inside lock asm. if complete, look at lock and determine if its in the lock position with door open, a arm will be up preventing the latch from going in. replace as necessary. Old duets (red lights) use standard lock asm same as GE and samsung. New duets (green lights) use whirlpool/new maytag unique asm. New locks come in two interchageable models, German (made in china) and Mexican, Mexican model is more troublesome, get german.
If lights flash during a cycle or other time, its giving a code, note the F code displayed

Jul 19, 2009 | Whirlpool Washing Machines

2 Answers

Is door reversible on duet model GHW9100LW1


The technician informed that we cannot reverse the door on the washer.

Apr 09, 2009 | Whirlpool Washing Machines

1 Answer

Whirlpool duets spoert f 21 error


3 screws on bottom front of the machice. These screws hold on the bottom cover. Once cover is removed the cleanout is apparent. Should take 10 min or less.

Jul 26, 2008 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Change the door


yes open the door look on the other side should see matter of fact i beleive that info is in owners manual if not reply to me and i will tell you how

Dec 30, 2007 | Whirlpool GHW9100L Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

7,007 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...