Question about Uniden DCT756 Phone

1 Answer

All of the sudden the phone just stopped working. It says 'out of range'.

The phone was plugged in and connected to the base all night. One morning I went to make a call and the phone says 'out of range' when it is in my hands next to the base. There is no dial tone. I've check the phone line and electronical power and both are good. What could be the problem? I've had this phone less than year and it has just stopped.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Remove battery from handset then unplug base from power supply. Reinstall battery in handset then plug base back in to power.It worked for me.

Posted on Dec 18, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The sound on my TV has suddenly stopped working


check all wires are firmly in place, especially the scart lead, and just give them a little push to make sure, if that doesnt work, try unplugging your tv from the mains and wait 5 mins, plug it back in, wait another 5 mins, and turn on, if that doesnt work, contact the company's customer service line.

Mar 17, 2012 | Sharp Televison & Video

1 Answer

My DECT6.0 telephone will not give me a dial tone nor answer any calls neither will the additional handset..Although my verizon direct line functions as it designed


Hello.

Here are some tips, found online:

Reset the phone:

Unplug the battery in the handset, unplug the phone line from the base and unplug the electricity from the base. Leave everything unplugged for an hour or two instead of a couple to five minutes that way you can get more of an idea of whether your phone will work. After an hour or two plug in everything. If resetting the phone doesn't work then try the next step.

Check the surge protector:

Is the phone line plugged into a surge protector? The surge protector may have stopped working or blown a surge, a sudden burst of electricity, which may have caused the dial tone in your cordless phone to go. Unplug the phone line from the surge protector then plug it back in and see if you get a dial tone. It could be that the phone line plugged into the surge was loose or not plugged in securely.

Try a different phone plug, outlet.

Check the base:

Is the base dusty and have possible dirt in the prongs where the phone sits? Lift the base and blow off dust.

Check the handset for dirt.


Rub metal connections on handset and base:

Use a pen cap or coin and rub the metal connections on the bottom of the handset. Rub the prongs, metal connections on base.

Hope these suggestions help.

Jul 25, 2011 | Uniden Cordless Phone

1 Answer

Sennheiser RS126 headphones/base stopped working


Broken audio cable entering the transmitter or audio jack plug.

Power supply plug loose / faulty power supply.

Nov 10, 2017 | Sennheiser RS 120 Consumer Headphones

1 Answer

Phones stopped working. They only read


first step is to unplug all power and phone connections from the wall for all Vtech phones and bases.

Second,plug each set and base in the wall for power one at a time.

Go back to the basics and pair the handset with the base of the unit.

Do this for all sets one at a time.

May 29, 2009 | Vtech 5.8GHz Cordless Phone with Digital...

1 Answer

My phone stopped working. I checked the battery


Check that the base station has power and then place the phone on the cradle on the base station for a minimum of 20 seconds this will reregister the phone security code. If the phone does not start charging or the base seems dead then check that the power pack for the base station in plugged in and turned on.

Apr 13, 2009 | GE 25952EE1 Cordless Phone

3 Answers

Thomson GE DECT 6.0 28213 Cordless Telephone


I finally find a way to stop this problem from occuring : never leave your phone on the charger with the battery isnt empty !

I know this sucks because what best place to put your phone at night than its base. But try it and it will work (unless your battery is already damaged). In the morning when i go to work, I charge it for 8 hours, then when I come back, I take it off the charge until next morning.

I used to put it on the charge for all night and all day until I read an interesintg post :
http://en.allexperts.com/q/Telephony-Clecs-Long-2450/Cordless-phone-interference.htm

Since I have been doing this, I didnt get any more problems with my phone.

May 28, 2008 | Thomson GE-28115FE1 Cordless Phone

1 Answer

Iphone touchscreen not working


try fully charging the battery

Apr 15, 2008 | Apple iPhone Smartphone

1 Answer

Diverse 2010 phones stopped working


I have solved this problem by un-plugging the base phone for the night, and then plugging in again this morning, when it started working again, but I don't understand why! anyway, problem solved.

Apr 10, 2008 | Siemens Lands Phones

Not finding what you are looking for?
Uniden DCT756 Phone Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

k24674

Level 3 Expert

8080 Answers

Cindy Wells

Level 3 Expert

5586 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...