Question about Televison & Video

2 Answers

WD5783 HAS SHUT DOWN WILL NOT TURN BACK ON. HAD

MODEL # WD5783 HAS SHUT DOWN WILL NOT TURN BACK ON. WHEN YOU PRESS THE "ON" BUTTON THE GREEN LIGHT COMES ON AND STAYS ON BUT THERE IS NO PICTURE. A FEW DAYS BEFORE THIS HAPPEND THE PICTURE DID APPEAR "YELLOWISH" IN COLOR. WE HAD THE BULB REPLACED 5/08 BY OUR EXTENDED WARENTY COMPANY THEY WILL NOT REPLACE IT TWICE- COULD IT BE THE BULB AGAIN? I CALLED THE MITSHUBISHI AND RECEIVED NO INFORMATION AND SENT US BACK TO THE EXTENDED WARENTY COMPANY. HAS THERE BEEN ANY ISSUES WITH THIS TV THAT WILL HELP ME OUT. IF IT IS THE BULB IS IT EASY TO REPLACE BY OURSELF?
THANKS FOR YOU HELP!!

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 135 Answers

Hi yes it sounds like the bulb and it is easy to replace yourself

Posted on Sep 25, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,779 Answers

It's possible that your DM ( digital module) is bad or the color wheel. I would have them come out and look at it since you have an extended warranty.

Posted on Sep 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for a solution to an error 6502 on canon printer mp510


turn power switch off so green light is extinguished.

First hold down resume button and then hold down power button so both are held down at same time

When green light comes on, continue holding down power button and let resume button go, then press resume button twice. Then let power button go.

Then press resume button four times, power button should be releasedbefore doing this.

Wait until printer settles down, if power is off, turn on. If power will not come on, remove power cord from back of printer, then wait 15 seconds before plugging back in again and turn power on. This normally solves the error problem - if not go through same procedure again.

Jul 25, 2011 | Canon Office Equipment & Supplies

3 Answers

How to fix error code 5200 on canon printer MP258? what is 5200 mean?


Here's the procedure. This code is normally encountered after refilling an ink cartridge and replacing the cartridge. Turn off printer. Hold down Stop/Reset button with one hand and turn printer on with other hand. After green light comes on for the ON button, press the Stop/Reset button two times and you should see the green light blink off and the orange alarm light blink "on" with the first press and then the green light comes back on for the power button and the orange light goes off with the second press (if you did it correctly). Now, you need to hold down the ON button about five seconds, then let go to shut OFF the printer. When you turn it back on, the printer should be back to the factory original condition. Make sure you set all your printer properties the way you want them again from your printer properties dialog boxes because some of the settings may have been stored in the printer's EEPROM, which you just reset to get rid of the offending alarm code.

Feb 01, 2011 | Canon Pixma Mp250 Allinone Inkjet Photo...

1 Answer

Canon mp250, not printing. Print screen says "creating print data" and freezes there.


This sounds like an internal memory problem and I don't have a workaround. Before you give up, try this technique to reset the printer to factory. They are great printers once you learn this reset technique. Turn off printer. Hold down Stop/Reset button with one hand and turn printer on with other hand. After green light comes on for the ON button, press the Stop/Reset button two times and you should see the green light blink off and the orange alarm light blink "on" with the first press and then the green light comes back on for the power button and the orange light goes off with the second press (if you did it correctly). Now, you need to hold down the ON button about five seconds, then let go to shut OFF the printer. When you turn it back on, the printer should be back to the factory original condition. Make sure you set all your printer properties the way you want them again from your printer properties dialog boxes because some of the settings may have been stored in the printer's EEPROM, which you just reset to get rid of the offending alarm code.

Jan 20, 2011 | Canon Pixma Mp250 Allinone Inkjet Photo...

1 Answer

How do i clear an error 5100 from my canon pixma mp250?


Try this technique. Turn off printer. Hold down Stop/Reset button with one hand and turn printer on with other hand. After green light comes on for the ON button, press the Stop/Reset button two times and you should see the green light blink off and the orange alarm light blink "on" with the first press and then the green light comes back on for the power button and the orange light goes off with the second press (if you did it correctly). Now, you need to hold down the ON button about five seconds, then let go to shut OFF the printer. When you turn it back on, the printer should be back to the factory original condition. Make sure you set all your printer properties the way you want them again from your printer properties dialog boxes because some of the settings may have been stored in the printer's EEPROM, which you just reset to get rid of the offending alarm code.

Jan 14, 2011 | Canon Pixma Mp250 Allinone Inkjet Photo...

1 Answer

When I turn on my Canon iP3000 printer the power light blinks five orange and one green light and continues to to so. It will not stay solid green.



Hello try

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Nov 02, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

What does the Error 5100 code on my printer mean?


If this does not work for your model revert back to me along with your model number
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

Jul 24, 2009 | Canon Office Equipment & Supplies

1 Answer

Laptop doesnt turn on when I press on the on/off button


Remove the battery for 10 minutes, put it back in, plug to power supply for an hour or two then try again.

Please don't forget to rate this

Mar 20, 2009 | IBM ThinkPad T20 2647 Notebook

1 Answer

Playstation 3 issues


try jigling the switch on the back

Feb 14, 2008 | Sony Playstation 3 (PS3) Console

1 Answer

Rca Big screen shut down and now no power


NO audio and no picture .... no power to on - off button. Checked outlet and it is good .... cable connection good - checked with another tv....

Jan 25, 2008 | RCA HD56W58 56" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74468 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...