Question about Kodak EASYSHARE M763 Digital Camera

2 Answers

Please when ever I switch on my camera and the lens comes out,it goes back and the machine goes off,but am able to watch old pictures but can not take new one! please help.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 101 Answers

Here are the steps:

1. Make sure you will install a new or fully charged battery/batteries into your camera.

2. Clean the battery contacts.

a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth.
b. Reinstall the battery/batteries into your camera

3. Without the memory card,turn on your camera.

If issue persists, call 1.800.235.6325 for repair.

It requires repair, its a common issue w/ these model of the KOdak camera. Even if the camera is off you may view the "Favorites". Issue has something to do with the lens.

Thanks

Posted on Sep 25, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 136 Answers

There is some problem on your lense motor system. show it to service centre if you have warrante. or consult a service technician.

Posted on Sep 25, 2009

Testimonial: "Thanks a lot "

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WB610 Camera buttons & lens aren't working as they should?


As soon as the camera is switched on, the lens barrel will come out. Everything should be ready to shoot pictures. If it is not responding to the buttons, you could try to remove the battery for a few moments. It will cause the camera, to start from scratch. Call it a cold boot. But then after switching on, it should respond normal, like you used to work with it. If it stays frozen, visit your dealer or contact a Samsung certified repair centre.

Mar 10, 2015 | Samsung WB610 Digital Camera Black

1 Answer

My samsung PL50 camera: i havent used my camera in a while but i bought a new charger, it is full charged and i can browse the pictures, but as soon as i press the on button the lense trys to move but will...


OK, the lens assembly has failed causing a shutdown error. So, technically, the camera is trash because it would WAY more expensive to fix that one than to just buy a new one. NOW, read carefully. When you power on the camera, watch when the lens tries to come out. You'll notice that the shutter on the lens opens first then it pokes out a bit then goes back in and shuts down. If you time it right, you can slip your fingernail under where the shutter is and "assist" the lens out more. dont pull too hard because you'll rip the fron of the lens assembly off. but once it is able to go past this point, 9 times out of 10, it fixes the problem entirely and the camera works just fine after that.

Aug 09, 2012 | Samsung Pl50 10.2mp Digital Camera Black...

1 Answer

Hi when i switch the camera on the shutter comes out ,a strange clicking noise and the shutter goes back in ,it is only 4mths old .


Hi there its a problem of your camera lens guide pin. Which is operate your lens for focusing. Thats pin is damaged & thats why shutter comes out ,a strange clicking noise and the shutter goes back in . Thanks.

Mar 25, 2010 | Kodak EasyShare M420 Digital Camera

1 Answer

Stops taking pictures


I have the similar problem, I turn on the camera and after the lens comes out , red light blink all this time, and suddenly it powers down without retracting the lens back in.
The battery are fully charged AA 2400mah / 2650mah Duracell at 4.0 ma with load test. I was wondering if there is any circuitry problem.? Any experts in digital camera electronics please respond? Trick: To bring back the lens back in for safekeeping i trik this, i turn it on while it is reading the memory etc and after a sec or two i turn the knob to off, this way lens goes back inside.
I have read other brands also have their cameras lens sticking out and never going back inside.

Feb 19, 2010 | Kodak EasyShare DX4530 Digital Camera

1 Answer

Only viotel picture - lens


If your camera still in warranty then replaced it .Because your lens can't make contact properly with image transferring chips. That's why all falls snaps comes violet. Watch the photo of a sample camera chip. The problem going on here. 46e40fd.jpg Thank you and waiting for you feedback.

Feb 03, 2010 | Kodak EasyShare M853 Digital Camera

2 Answers

Fuji (A360) lens won't come out


Lens mechanism is jammed. Probably the counter wheel attached to the drive gear is hitting the sensor and stopping it from working, so will switch off. Needs a service

May 04, 2009 | Fuji FinePix A360 Digital Camera

2 Answers

Goes off after lens come out.


Get it repaired under warranty. Sounds like a logic circuit problem.

Dec 10, 2008 | Pentax Optio S50 Digital Camera

2 Answers

LENS ERROR


My Nikon L14 Camera Is Showing Up Lens Error
Can Someone Please Help Me.

Aug 22, 2008 | Nikon Coolpix L14 Digital Camera

2 Answers

Lens error!!!!


when i turn on my camera the lens comes out ,then goes back in saying theres a lens error.it tells me to restart my camera but im not sure how too. is it just turning it back on ,or is there a reset button?

Jul 03, 2008 | Canon PowerShot S5 IS Digital Camera

Not finding what you are looking for?
Kodak EASYSHARE M763 Digital Camera Logo

Related Topics:

297 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...