Question about Panasonic NV-DS27B Mini DV Digital Camcorder

9 Answers

Error displayed: TO SERVICE

The unit has stopped working, I am receiving a "PLEASE RE-OPERATE AFTER PUSHING RESET BUTTON". I have pressed the reset button and also receiving the "TO SERVICE" error.

Posted by on

  • 1 more comment 
  • marcus67 Jan 06, 2008

    yes i have the same problems done everything i was told reset but nothing works

  • Anonymous Jan 15, 2008

    Have the same problem! Also tried to change Internal Battery (CR2025) but it didn´t solve my problem. DD

  • jord2k Jan 29, 2009

    where is internal battery ?

×

Ad

9 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Fix the spring at red position (blue = old)
Error displayed: TO SERVICE - d49e1f3.jpg

Posted on Jun 23, 2009

  • Florian R
    Florian R May 18, 2014

    perfect worked for me!

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

My one had this problem, occurring only when i put tapes in which it couldnt read from or play. i managed to fix it by turning the read head (which was jammed) a little bit with my index finger. the read head is the big silver drum at the bottom of the compartment. if your finger is thin enough you should be able to reach it from the top of the tape compartment when it is open. rotate it a little bit back and forward and try to free it up. problem solved.

Posted on Mar 07, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

I had this problem. I changed the internal battery. That didn't work. I thought I'd tried everything and had given up hope, then I just took the tape out and shook the tape. I put the tape back in, gave the door a wiggle and firmly shut it. Now it works!

Posted on Feb 12, 2008

Tseryt

Posted on Jul 26, 2008

Bloody marvellous advice. Fix it for me!!!!!

Posted on Jul 04, 2008

Tnanks!!! Shake!

Posted on Jun 22, 2008

Thanks carrut!!!!
A little shake worked like a charm... Looks like it's on it's way out though.

Posted on Jun 20, 2008

The solution to this problem is changing the internal battery
is the same battery of the remote control

Posted on Jan 09, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

OMG! Shake it!!!! Thanks so much!

Posted on Jan 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My washer error message unit detect a problem


The most common solution for this message is to turn the machine OFF and then ON. If the error resets, you are done.

However, this message will sometimes cause the control to stop the machine from working. With this type of error, the control panel will need to be reset. The following steps will allow you to reset your control.

Solution:

  1. Clear the ERROR from the screen: Press and hold the MY CYCLES and BACK buttons simultaneously for 3 seconds. The control will display any recorded errors. Please write down what error codes are shown on your screen in case service is needed. If a MORE icon is displayed on the screen, press MORE to list additional errors. When the EXIT button appears, press EXIT.


  2. Remove Power: Follow the onscreen instructions to remove power (unplug unit) and then immediately plug unit back in.


  3. Clear Setup Mode: After power is restored, a setup screen that begins with "Congratulations..." will be shown. DO NOT PRESS the OK button shown at the bottom of the screen. Press the START/STOP and POWER buttons simultaneously until the Home Screen is displayed. Your unit is ready to function normally.

Mar 02, 2015 | GE Profile WPRE6100G Top Load Washer

1 Answer

Error 5b00


Hello, your error is about the ink absorber.

"Ink absorber full Japan:
[5B00]
Others:
[5B01]
P07 The ink absorber
becomes full.
Replace the ink absorber (ink absorber kit), and
reset the ink absorber counter."

This is the way to enter service mode:
"Start the printer in the service mode.
i. With the machine power turned off, while pressing the Stop/Reset button, press and hold
the ON button. (DO NOT release the buttons).
ii. When the Power LED lights in green, while holding the ON button, release the Stop/Reset
button. (DO NOT release the ON button.)
iii. While holding the ON button, press the Stop/Reset button 5 times, and then release both
the ON and Stop/Reset buttons. (Each time the Stop/Reset button is pressed, the Alarm
and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm
LED.)
iv. When the Power LED lights in green, the machine is ready for the service mode operation
and "0" is displayed on the 7-segment LCD.
2) Start the Service Tool on the connected computer.
i. When a button is clicked in the Service Tool dialog box, that function is performed. During
operation of the selected function, all the Service Tool buttons are dimmed and inactive.
ii When the operation is completed, "A function was finished." is displayed, and another
function can be selected.
iii If a non-supported function is selected, "Error!" is displayed. Click OK in the error message
dialog box to exit the error."

You can use the service tool to reset this error after you have enter service mode.
here is the service tool:
http://www.4shared.com/file/QptYmQTM/ServiceTool_V1074planet.html?

Nov 03, 2013 | Canon PIXMA MP180 All-In-One InkJet...

2 Answers

How to reset error e4


The reset method work for canon printers that using PG-40 and CL-41 cartridge. After doing this reset method canon printer will not display low ink notification anymore and will not show error code “E4′ or “E5′.
Here How to Disabling Low Ink Level Notification for Canon IP and MP, the method to reset ink level notification:
  1. Push “resume” for 5 seconds for canon IPXXXX. For canon MPXXX you must enter to service mode.
  2. Push Power switch then remove power cord.
  3. Insert plug power cord while pressing “power switch” at the same time.
  4. Push Start/reset by step 2 continue Wait display shown “0′
  5. Push + change display from “0′ to “1′
  6. Push color button 2 times
  7. Push Power switch again , Printer will print 1 page
  8. Open cover
  9. Unplug power cord
  10. Take out ink cartridge #40 and #41
  11. Insert plug again
  12. Push power switch
  13. Open cover (scan cover)
  14. Insert ink cartridge #40 and #41 again
Enter to service mode for canon MPXXX
  • With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
  • When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
  • When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)


Apr 15, 2010 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

" USB ERROR "


Hello kenwood12312,

With the receiver OFF, remove the USB device then turn the power ON. If the same display is repeated, use another USB device. Remove the USB device without entering the remove mode. If this does not work, try resetting the receiver. Press the "reset" button just above the AUX INPUT. This will return the unit to factory default settings. If these steps fail and you still get the USB error, the receiver is faulty and needs service.

Hope this helps.

May 20, 2009 | Kenwood KDC-MP438U Car CD/ MP3 Player

1 Answer

Error E22 in my MP145


Hi there,
Error E22 = Carriage error

to reset this error follow the steps below--

with the printer powered off but connected to a power source , you must:
1. Press stop/reset button, and then press [ON/OFF] button to restart
2. Press [ON/OFF] again and then press twice the stop/reset button.
3. Press [ON/OFF] & Stop/reset button together, this time to enter the repair status and power lights will be green,
4. Press stop/reset button 4x and warning lights will be go out in [ON/OFF]button.
5. Turn off the printer.( it must be turn off) and then turn it on again.
.

Use with your own risk ,
i’ll try this way and my Pixma MP145 not blink again.
.

The number of the Reset button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5 Unplug cable power. (for MP145 / MP150)
6 Turn Off Power. (for MP160)

Note if the above steps did not work's means you need to check your Carriage;
Hope this helps...
Good Luck!!!

Mar 23, 2009 | Coby Audio Players & Recorders

2 Answers

The display has failed - Kenwood DPX501U car cd receiver


Same problem as many people who own the kenwood dpx501u head unit. The display has stopped working, pressed the reset button and this has done nothing. Is this a common fault?

Mar 15, 2009 | Kenwood Car Audio & Video

2 Answers

"line in use" lcd display


here is link
http://slayo.com/resetting-error-e27-waste-ink-absorber-full-canon-pixma-mp150mp160.html

you will need to do no3

EEPROM reset

Just follow instructions!
Checked by me and its working
Marko - SERBIA

Sep 11, 2008 | Canon FAX-JX200

1 Answer

Panasonic NV-GS50 - Display indicates "To Service"


This means you need to get it serviced, because it has detected a fault or error.

Sep 06, 2017 | Panasonic NV-GS50 Mini DV Digital...

4 Answers

Canon Pixma MP150 Error code E 42


Had exact same problem. Scanner light should come on at power up. Found ribbon cable connecting scanner unit to base had come unplugged from socket on circuit board. The ribbon cable is one of three found near back hinge of scanner and is hidden underneath the other two. It should drape over the edge of circuit board and then plug into small recepticle on inner side of board. I plugged it in and printer works again. Hope this helps.

Nov 04, 2007 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Panasonic NV-DS27B Mini DV Digital Camcorder Logo

2,259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Video Cameras Experts

Kenneth Walker

Level 2 Expert

187 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1910 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

Are you a Panasonic Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...