Question about Saeco 00034 Incanto Sirius Super Automatic Espresso/Coffee Machine

1 Answer

2 for 1 Espresso

At my wits end. I too get double shots when pressing for one only.

Just picked it up from service, during which the touch pad was replaced. Brought it home only to find that even with the new touch pad, it STILL makes 2 for 1!!!

It's going back since the repair was paid for (almost $150), but does anyone have any other suggestions/probable causes???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,618 Answers

Have them reprogram the the buttons, and make sure you are there to show them what is happening, when you press the button, and tell them you want it plugged in when you pick it up so that you can test it there.

Posted on Oct 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to use top and bottom ovens but at different temps - how do I do this


To Set a Cook T ime:
1. On double oven models only, press UPPER OVEN or LOWER
OVEN for the one you want to set.
2. Press BAKE or CONVECT UPPER (on some models).
Press the number pads to enter a temperature other than the
one displayed.
3. Press COOK TIME.
4. Press the HR and MIN "up" or "down" arrow pads to enter
the length of time to cook.
5. Press START/ENTER.
The start time and stop time countdown will appear on the
oven display.
On double oven models only, when both upper and lower
ovens are being used at the same time, touch UPPER OVEN
or LOWER OVEN to display the respective cook time.
When the stop time is reached, the oven will shut off
automatically and "End" will appear on the oven display.
If enabled, end-of-cycle tones will sound, then reminder
tones will sound every minute.
Repeat the process by choosing the other option of UPPER or LOWER OVEN

Sep 04, 2011 | Whirlpool RBD305PD Electric Double Oven

1 Answer

I need to calibrate the pull of espresso for each shot on my espresso machine. How do I do this?


Press spiral button and hold for 8 secs, lights will flash, then press button you want to program when you get correct volume press stop button. Some machines need a key to program them, check to see if there is a lock on the front of machine. If you have the model with the cronos pads you do not have to worry about a lock.

Aug 24, 2010 | La Marzocco Linea Series Group 3 Espresso...

1 Answer

Touch pad for the oven does not work


eith touch pad or control board un plug the touch pad if it returns the board is bad if it dont the touch pad is

May 27, 2010 | GE Profile JTP56 Electric Double Oven

1 Answer

Button panel does not work or it starts making 'pick-pick' noise


The touch pad seems faulty, there may be moisture behing the first touch pad film, suggest replacing touch pad as it cannot be fixed, Phil

May 18, 2009 | Sanyo EM-S9515W Microwave Oven

1 Answer

1994 Pick up. Came into the shop needing brakes


Yes it could be your wheel bearings but it also could be the pins that hold your brake pads in. The pins need to be well lubercated to allow the pads to move freely on them. the wheel bearing might be miss adjusted or have some thing in them causing the noise. i would first check the caliper make sure the pads are not draging on the rotor at all. make sure the pads do not have rocks or dirt stuck in them. The problem is most likely to be with your brakes or even your dust cover for your front rotors. make sure the dust cover is not bent where it is touching the rotors.

Mar 04, 2009 | 1994 Toyota Pickup

1 Answer

Double shot on the Sirius


Hi,

You need a new touch panel, first take it off and make sure that the glue is holding it on place, if it hold it on place then you have to replace it.

The spare part number is: 224890850

Where are you from?

Have a nice day
/Mirran

Oct 22, 2008 | Saeco 00034 Incanto Sirius Super Automatic...

2 Answers

Touch pad


During startup press F2 and you will enter the bios setup utility. There you can change the optio of touc pad to off.
Be carefull while changing anything in the bios setup utility.

May 13, 2008 | Sony VAIO VGN-NR185ET Notebook PC - Wenge...

1 Answer

Cuisinart programmable espresso maker em-200C


Currently, both my manual and steam button are flashing. No idea why. Any help?

Feb 27, 2008 | Cuisinart Programmable Espresso Maker

Not finding what you are looking for?
Saeco 00034 Incanto Sirius Super Automatic Espresso/Coffee Machine Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saeco Coffee Makers & Espresso Machines Experts

espressofixr

Level 1 Expert

16 Answers

83bj60

Level 1 Expert

22 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Saeco Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...