Question about Kodak EASYSHARE M1063 Digital Camera
When I turn on my kodak camera all I get is E-12?? what is it??
E-12 is a lens error.
Here are the steps:
1. Make sure you will install a new or fully charged
battery/batteries into your camera.
2. Clean the battery contacts.
a. Remove the battery/batteries and the memory card from
your camera, then wipe the battery contacts with a soft,
b. Reinstall the battery/batteries into your camera
3. Without the memory card,turn on your camera.
If issue persists, call 1.800.235.6325 for repair.
Posted on Sep 25, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Kodak camera easyshare C330
Try removing the memory card and the battery
Then power on the camera w/o the memory card
Then if the same problem persist try formatting the internal memory
If Problem Still persist you could call 1 800 235 6325 op 12 then op 2 your camera might be needing repair
Posted on Aug 21, 2009
The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.
Use these at own risk as it may further damage the camera.
Firstly , try connecting your ac adapter or usb cable.
Try holding the shutter button while switching on the camera.
Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).
Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.
Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.
Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.
Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.
If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.
You can also have a look at THIS link.
Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.
Posted on Nov 22, 2010
Tips for a great answer:
Feb 16, 2011 | Kodak EasyShare C330 Digital Camera
Feb 21, 2010 | Cameras
Feb 03, 2010 | Kodak EasyShare Z700 Digital Camera
Nov 07, 2009 | Kodak Easyshare M753 Digital Camera
Aug 20, 2009 | Kodak EasyShare C330 Digital Camera
Dec 29, 2008 | Kodak Easyshare M753 Digital Camera
Dec 15, 2008 | Kodak EasyShare C763 Digital Camera
Aug 13, 2008 | Kodak EasyShare C633 Digital Camera
Apr 22, 2008 | Kodak EasyShare C643 Digital Camera
Oct 09, 2017 | Kodak EASYSHARE M1063 Digital Camera
Apr 25, 2014 | Kodak EASYSHARE M1063 Digital Camera
51 people viewed this question
Usually answered in minutes!