Question about Dell Dimension 2400 PC Desktop
X-ing them out repeatedly doesn't get rid of them. they reappear every time the page is opened. they consist of 5 tabs.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 14, 2014 | Apple iMac Computers & Internet
Apr 13, 2014 | Mozilla Firefox
Mar 09, 2014 | HEWLETT-PACKARD 625 Notebook PC
Mar 07, 2017 | Microsoft Windows XP Home Edition
Tools you will need are a narrow flat head screw driver, narrow pry bar, needle nose pliers, a hex-key set, and a socket wrench to match the nuts on the mirror. Start by finding an oval-shaped tab right behind the handle bar on the door. Using the screwdriver, go from underneath and pop out that tab. Use your hex-key to unscrew the screws. Repeat that process with the control tab. With this, I suggest using a shop rag to keep from scratching or damaging the panel. Once you get this tab off, disconnect the signal cables from the door lock and the window controls. Next you need to pop off the covering around the door latch handle.
Now that you have this done, it's time to take off the door panel. Using the pliers, pull off the two circular tabs along the door jam. Now take your pry bar, starting from the bottom next to the door hinges, pop off the door panel. You will hear snaps, that's a good thing. Once you have all the snaps undone, slide the panel up and out. You'll have to be cautious around the locking lever.
Now you have a view of the mirror cover. Slide it up over the tabs that are securing it to the door. Now take your socket wrench, get rid of the other bolts. When you have all the bolts removed, slide the mirror out.
You have successfully removed the old mirror! Now it's time to put in the new mirror. We are going to start by inserting the mirror in the appropriate holes and tightening them down. You can't tighten them too much, just don't strip the nut. That simple. You now have your new mirror installed. To close up, just go in reverse through the steps I just led you through. Good job!
Hope this helps.
Jun 25, 2012 | Chevrolet Malibu Cars & Trucks
Jul 19, 2011 | Mozilla Firefox
May 04, 2011 | Mozilla Firefox
Dec 18, 2010 | Mozilla Firefox
Jul 02, 2010 | Compaq Computers & Internet
81 people viewed this question
Usually answered in minutes!