Question about Roland Vs-2000CD Digital Studio Workstation System

1 Answer

Roland VS2000CD Hi, could you please tell me how to insert a saved drum track into an existing project. Thanks so much Shelly

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers
Re: Roland VS2000CD

Shelly, I have a 2480 but it must be very similar. Import the drum track as a wav file into two of your tracks within the same project. You must make sure the file is a WAV file and nothing else.

Hope it works, on the 2400, I am sure it must since it is a must have.


Posted on Apr 28, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My roland vs2400CD keeps getting stuck at the load screen. I have tried the factory reset, but can't complete it. Is there anything else I can try, or do I have to have my hard drive replaced?

Hold the two buttons down above the slider on track #4 when turning the power on. You have something that is corrupt on your hard drive. This bypasses looking for a project to load up and just goes straight to the operating system.

Feb 24, 2011 | Roland Vs2400CD Digital Workstation W/CD...

1 Answer

Lost f/x across all tracks prior to Mastering on Roland 2480cd

Double check that you haven't inadvertently muted or turned down the effect returns. Also make sure they haven't been inserted elsewhere as they wont work as post effects while inserted into a single channel. If you are using some effects, it will cancel the effect card's ability to use its second channel. (ex. mastering suite)

Feb 17, 2010 | Roland Vs2400CD Digital Workstation W/CD...

3 Answers

My roland vs-2000

could you please be more specific


Sep 01, 2008 | Roland Vs-2000CD Digital Studio...

1 Answer

How do i use the effects processor for more than one track on a roland mv 8800

You can't. Best way is to set your FX on your track. Hit sampling button, then go to the Resampe tab, hit start, run your track, save sample, load it back up. Not exactly how I woulda set things up, So I make everything dry on the mv and dump into my DAW for FX...Not sure what Roland was thinking with this little gem, but hit up site for info on the MV. After I found this site, I threw the manual out. Hope it helps.

Aug 23, 2008 | Roland Mv-8000 Sampling/Record Production...

1 Answer

Roland VS2000Cd Shift Key not working

there's a button near the F buttons that lets you choose between the lcd screen and the vga screen!
I was on the wrong setting.

Aug 15, 2008 | Roland Vs-2000CD Digital Studio...

2 Answers

I can't figure out how to record on 4 tracks at the same time

how do i mix down tracks have manual but it is hard to follow taccam2488mk2 thanks

Nov 07, 2007 | Tascam 2488 Portastudio Multitrack...

2 Answers

LG home theatre system model LH-T1000

Hi I have the same tv. How is the video signal coming out of the dvd player and what is it plugged into on the tv. I travel for a living and coach my wife over the phone all the time.

Sep 17, 2007 | Home Theater Systems

3 Answers

Roland vs 2000cd studio workstation/harddisk recorder.

I have figured out a way to get around this problem without losing your data or sending it to Roland. I have three roland 2480s and have 4 hard drives. Buy another spare drive and when you load up to a different IDE drive shut it down, then put the old drive back into the unit and it will boot from the last known ide. Make sure it is not the same IDE # that was giving you the problem. You will get at your files but you better start to backup and defrag. I will not delete files on my roland unless I am willing to defrag. Buy an extra drive from a third party. You can see a company that sells this stuff on ebay and they are very good. "VS something store."

Aug 10, 2007 | Roland Vs-2000CD Digital Studio...

Not finding what you are looking for?
Roland Vs-2000CD Digital Studio Workstation System Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Roland Home Theater Systems Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Joseph Mueller
Joseph Mueller

Level 2 Expert

335 Answers

Are you a Roland Home Theater System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides