Remote controle code

Unless the monitor itself had a remote control (most do not), there is no way to control the device with another remote.

1. HAVE CROSLEY TV AND SATELITE HAVE REMOTE AND NO INSTRUTION MODEL ARP4004/27

hi! i have here a couple of codes for your Viewsonic tv, just try them, 1038, 1149, 1180, 1181, 1182, 1183, 1184, 1185, 1186, 1187, 1188, 1189, 1190, 1205, 1206, 1441, 1361, 1489, 1495, hope this helps!!!! goodluck!!!

Yes you can purchase the remote from Viewsonic Online Parts Store or I have seen them for sale at remotes.com and that 3rd party store gives a 1 yr. warranty unlike VS 90 day warranty on the remote. As for the remote codes, Viewsonic does not have any since the universal remote comes furnished with a code book from the "MAKER" of that Universal Remote. I have heard that the Philips TV brand codes for universal remotes work on quite a few series' of Viewsonic TV's, so try those from your code book.

Here for the Jensen remote just click below;

Here is link to the manual:

http://www.remotecodelist.com/remotes/jensen/JR300C.pdf


Here is some helpful information I found:
Without the code on JER-323:
1.Manually turn on the component you want the remote to control.
2. Press the device button, example:( TV) and the (power button) for 3 seconds until the (on/off button stays lit).
3. Once the (on/off) button is lit, press the (on/off) button until the unit (the TV or unit you are trying to control.) turns off.
4. When the code is located, press the (stop) button at the bottom to save the code.
Here are some codes I found for the Jensen 323:
GE VCR: 2000, 2013, 2021, 2022, 2053, 2087, 2089, 2091, 2115, 2120
Motorola Cable Box: 5000, 5003, 5046, 5047, 5052
Mitsubishi TV 0093, 0150, 0178, 0019
JVC VCR 0067, 0041, 0008
JVC DVD 0558, 0623

Hope it may help you;

Regards,
VOTIT

I had the same problem with a Viewsonic N3735W LCD TV and Comcast Customer DVR 3 Device remote. I contacted Viewsonic and they gave me 11454 which works.

Hi guys i have Maxent 27 inches LCD and a satelite box i used the salelite remote for my TV The code is 242 Try that and get back to me.

Yourbello

The easiest way is to do device code scan. Since you want to program the TV, hold the TV button on your bell expressvu remote. When all the top buttons light up, press the power button, the TV button light should remain lit. Keep pressing up/down until your TV turns off. When your TV turns off, press the # button. Thats all. Your done.

If you want to set up the AUX button, hold the AUX button until all the buttons light up. Then press * and either

0 - second TV
1 - second VCR/DVD player
2 - audio amplifier or cable box

Then press the power button and press up/down until the device turns off. The last step is to press # and your done.

https://fjallfoss.fcc.gov/prod/oet/forms/blobs/retrieve.cgi?attachment_id=305485&native_or_pdf=pdf

The manual

Without a name, thats almost imposable my friend. Try a Good universal on the manual search. maybe you will get lucky and the remote will work. Good Luck