Question about Raymarine C120 System Pack C120 Raystar 125 Dsm300

1 Answer

I can't access dsm reset through fishfinder menu, it keeps saying no data source and I can't scroll down!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 76 Answers

Check that there is power available at the DSM. Then verify that the DSM connector cable is correctly connected between the DSM and the C120. Finally, be sure that you have the most recent software version installed ( V 4.29). If all of that fails to bring back the DSM, try a factory reset. You accomplish this by holding down the first softkey while powering up the display. Hold the softkey until the reset countdown ends and the display begins to reboot. Be aware that a factory reset will delete any waypoints, routes, etc. so be sure to back upp anything important.

Posted on Oct 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost my pin to activate my phone


You will loose all store data doing this but you will get access to using the phone again. From the LG website:

1. Power down the phone then remove/reinsert the battery to ensure that the device is completely off
2. Press and hold the following keys for 10 seconds: Volume Down + Home Button + Power Button. Release all 3 keys when the Android Recovery Menu pops up
3. Press Volume Down to scroll down and highlight "wipe data/factory reset"
4. Press the Menu Button to select
5. Press Volume Down to scroll down and highlight "Yes - Delete All User Data".
6. Press the Menu Button to select
7. After data wipe is complete simply highlight "reboot system now" and select it by pressing the Menu Button.

Mar 13, 2015 | Net10 LG ULTIMATE 2 No-Contract Cell Phone

Tip

How to Reset your Samsung Phone If You Can't Access It


  • Turn Off Your Phone
  • Now press and hold together: Volume Up + Home + Power button, until you see Samsung logo.
  • After a bit you will have access to the phone's boot menu. Using the volume up/down buttons to navigate, and the power button to make selections, find and select the Wipe Data/Factory Reset option.
  • Scroll down to Yes, delete all user data, and press the power button once again. You will notice script scrolling along the bottom of the screen, which will end in Data Wipe Complete.
  • Once the operation is complete, press the power button once more to reset the device.
http://www.digitaltrends.com/mobile/how-to-factory-reset-galaxy-s6

on Jul 08, 2016 | Samsung Cell Phones

1 Answer

Zte 4gLTE phone says settings have forced stopped after I hang up with each call..I done a factory reset but it didn't fix it


maybe the problems it in application?

try this note all data will be deleted

step 1. turn phone phone step 2. hold the power button/ volume down button
step 3. use the volume down to select wipe/factory data reset
step 4. use powerbutton to confirm selection


or


Power OFF the handset
While OFF; Simultaneously press and hold the Volume Down, Camera, and
the Power keys for 10 seconds.
When the Android icon is displayed touch the Menu sensor key .
Scroll with the Volume Down key to "wipe data/factory reset" and press the
camera button.
Scroll with Volume Down keyto: "Yes -- delete all user data" and press the
camera button.
When Data wipe is completed the option "Reboot system now" is
highlighted, press the camera keyto reboot the device.

Jun 22, 2014 | Cell Phones

1 Answer

How do I master reset the phone lock code for my ZTE G N290?


Hard Reset: 1.Power OFF the handset. 2.Now press and hold the Volume Up, Muve Music key and the Power keys for 10 seconds. 3.A test screen (Triangle / Exclamation mark) will be displayed as below. 4.Press the Volume Up and Volume Down keys simultaneously to access the System Recovery screen. 5.Scroll using Volume and select "Wipe Data/Factory reset" and press the Muve key. 6.Scroll using Volume and select "Yes - delete all user" and press the Muve key. 7.When complete the system recovery screen is displayed. 8.Select "reboot system now" and press the Muve key. Master Reset: 1.Tap the Menu key 2.Tap Settings 3.Scroll to and tap Privacy 4.Tap Factory data reset 5.Read the message about erasing data 6.Tap Reset phone 7.Tap Erase everything.

Mar 30, 2014 | Cell Phones

1 Answer

How to hard rest pantechp9060


from home scree press the menu kee and then tap settings. scroll and tap Privacy. tap factory data reset. tap reset phone. if security is enabled enter your unlock pin password or pattern. tap erase everything.
Alternative method.
1.power phone off
2.press and hold HOME, Volume down and power keys until an exclamation point is displayed next to an android on screen.
3. Press the Home key to view the Android system recovery options
4. press the volume down to scroll to Wipe data/factory reset. and then press the menu key to select.
5. press volume down to scroll to yes -- delete all user data and then press the menu key to select.
6. when data wipe complete is displayed select reboot system now.

Oct 28, 2013 | Computers & Internet

1 Answer

How to hard rest pantech p9060


Factory reset via hardware on Pantech Pocket P9060: power, volume down and home buttons all at same time > scroll to wipe data/factory reset > press menu button > scroll to erase all data > press menu button > scroll to reboot now > press menu button

Oct 28, 2013 | Cell Phones

1 Answer

Hardreset motorola mb508


To reset your phone,Please follow this procedure

1. Open the Application tray
2. Touch settings
3. Scroll down and touch policy
4. Scroll down and touch Factory Data reset
5. Touch Reset phone

If you can not access the menu,Here's the Hard Reset method

1. Power of your mobile
2. On the hardware keyboard,Hold the "X" key and the "Power" button.
3. When Moto symbols comes out,you may now release the "Power on" key but keep holding the X key until you see a triangle and an exclamation point.
4. Now press the "Fn" key and "T" key at the same time.
5.You will now see a menu on screen
6. use keyboard cursor key to move the blue highlighted selections
7. To proceed, select "Wipe data/Factory reset
8. press the return key to select the option that is highlighted.
9. Use the cursor key to highlight YES from the next menu.
10. Press the return key to complete the selection.
11. reset is on progress then wait until it's DONE.
12. After the process,you will see a message "Reboot System Now",select it using the cursor.
13. Press the return key to reboot the device.


Thank you for visiting Fixya...

Jul 14, 2011 | Cell Phones

4 Answers

Raymarine C120


I don't have the sounder so can't address your question directly, but you can download all Raymarine manuals for your gear directly at www.raymarine.com

Aug 23, 2007 | Raymarine E120 GPS Receiver

1 Answer

Fish finder


You have either the DSM250 or DSM300 digital depth sounder module installed. The C80 is not seeing it.

There is an LED status light on the DSM. For starters, it should be lit either red, yellow or green to confirm it is actually powered on. We are hoping for a green light.

Double-check the cable between DSM and C80 for tightness. Also double-check the DSM's power cable for tightness.

The DSM's are sensitive to voltage level onboard. Make sure the DSM's connections to the circuit breaker panel or battery are tight and clean. Double check with a multimeter the there is 12V DC available to the DSM.

Let me know what you find.

Jun 18, 2007 | Raymarine C80 GPS Receiver

Not finding what you are looking for?
Raymarine C120 System Pack C120 Raystar 125 Dsm300 Logo

Related Topics:

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Raymarine Boating Experts

Steve
Steve

Level 3 Expert

693 Answers

merc racing

Level 1 Expert

36 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Are you a Raymarine Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...