Question about Kenmore Elite HE5t Washer

2 Answers

What does Sud mean on the washer machine - Kenmore Elite HE5t Washer

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenmore Master
  • 2,605 Answers

Typically it is indicating there are too much suds in the machine for it to operate effectively. i.e. too much detergent, wrong type of detergent, or a load of soap filled towels etc. Rinse the unit out via a "quick wash" cycle without any garments in the machine and try again...using "HE" detergent, or less of the detergent. DO NOT use non-HE no matter what sales people or friends have said. It is the great destroyer of tub bearings, clothing and just all around BAD. Good luck :)

Posted on Sep 25, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

The newer front loads have a suds sensor which detects the presence of excessive soap suds. This can be solved by switching detergents to a phosphate free detergent. If this is what you are already using, then there could be a problem with the sensor.

Posted on Sep 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer stops running and displays code SUD. The water doesn't drain until It's put on the rinse/spin cycle.


Make sure you are using HE (High Efficiency)detergent. The codes could mean your washer is telling you it has used a built in "SUD" routine during final rinse

Jul 18, 2015 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

On the last load, there was a message on the screen the read Sud what did that mean?


to much detergent,sud is for suds.try running the washer with nothing but water,after 5 minutes drain out the water to get the suds out.are you using H.E. detergent and if so it should only be like 1/4 of a cup,any more can damage the machine,the extra detergent can damage the spider gear in the washer.

Apr 09, 2011 | Washing Machines

1 Answer

Machine read sud


SUD means too much soap was used. Run the washer with a few empty loads and no detergent and the SUD should go away.

Dec 23, 2010 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

What does SUD mean?


SUD means a detection of suds in the machine. These machines are very sensitive to over sudsing. Try adding just plain water or bleach to break down the suds level. They say to use 1/4 of the detergent you would use in an older machine.

If you see "Sud" or "Sd" with the Rinse status light on, the washer is in the process of removing suds. Let the cycle finish

If you see "Sud" or "Sd" and the Cycle Complete light is on, the washer detected too many suds during the cycle and your load may not be fully rinsed or water may not be fully removed. You may want to select a Rinse/Spin cycle for further rinsing.

Jul 31, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Error code "SUD"


SUD error means there is to much soap being added, the washer will shut down, if it cents to much soap

Jan 12, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

What does it mean when your washer says ''sud''


If the digital display reads "sud" I suspect you may be adding too much detergent especially if this is a front load washer. You only need 2 tablespoons, seriously. Don't put in a cup of detergent into a front load washer as it doesn't require that much and consequently it will "oversuds" which will cause the machine to either "lock down" or go through an extended wash/rinse cycle which defeats the purpose of the front load saving water...good luck

Aug 11, 2009 | Whirlpool Washing Machines

1 Answer

Sud code comes up and stops and just beeps


Are you using HE detergent (for all front load washers ) or regular detergent ? SUD means suds lock from regular detergent .

Jul 12, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Washer flashes P 2 and now SUD will not finish cycle


F-2 IS ERROR CODE SUD MEANS NOT USING H E DETERGENT,, REMOVE DEBRIS FROM PUMP AND SHOULD RESOLVES YOUR PROBLEM ,, REMOVE BOTTOM PANEL 3 SCREWS ONCE REMOVE PUMP FILTER RIGHT IN FRONT BE SURE TO HAVE ALOT OF TOWLES READY MACHINE STILL STORES 3 GALLONS OF WATER

Nov 28, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Spinning and draining does not work, F error or sometimes Sud


Sud means you using to much soap and the f code means soap is locking the drain pump up and wont allow unit to drain and spin.

Nov 22, 2008 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Kenmore Elite HE5t Washer Logo

Related Topics:

722 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5470 Answers

Mike Squire

Level 2 Expert

391 Answers

Robert Rankin

Level 2 Expert

338 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...