Clearwire driver for Mac not compatable with Power Pc

This is most likely due to the Motorola modem still having the Media Access Control (MAC) address of the device that was previously connected the modem in NVRAM.
In order to clear this old MAC address, the easiest thing to do is to unplug the power cable from the modem for 15 to 20 minutes. This allows the NVRAM in the modem to clear and makes it able to accept the new MAC address of the router.
After the modem has been unplugged from the power for 15 to 20 minutes, plug the Ethernet cable of the router into the modem and plug the power cord back in to the modem. After the modem syncs back up to the network, it should add the MAC address of the WRT54GL router to its NVRAM and assign it an IP address. This should allow the router to connect your systems to the Internet.

Your modem most likely needs to be powered-off for about 15 minutes in order for the NVRAM to clear the MAC address of the device that you previously had connected to it.
Unplug the power cord from the modem and wait about 15 minutes with the power off. After the 15 minutes, connect the router to the modem with the Ethernet cable and plug the power cord of the back in to the modem. One the modem has completed its startup, it should then work with your router.
If this does not work, then you may need to call your ISP to have them remotely clear the old MAC address from the modem so that it will work with your router.

First you need usb modem driver of sigmatel mobile . You can easily download in http://rapidlibrary.com or http://usefultools.50webs.com/. And you need service provider i.e cdma sim card. make a Internet connection from control panel>network connection.if you still have problem visit http://usefultools.50webs.com/

i have problem with gprs connection

chainees phone dont have modem. so you cant use pc suit drivers for connecting to mobile to pc internet. you will have to buy a multimedia set of any company like nokia, sony, motorola. they have modem then you can access internet in your pc by mobile.

No you do not, but you do need some form of a wireless router to make that Internet connection wireless. Depending on which modem you have that connects to the Internet, you might already have a wireless router.

Compaq/HP laptops that have a builtin wireless adapter have a wireless transmitter symbol near the bottom edge of the LCD screen.
If you don't have a wireless adapter you need either a PCMCIA or a USB wireless adapter. My choice would be a PCMCIA type because it frees up a USB port for other devices.

Sounds like the Clearwire modem has issues. Can you contact clearwire or go to there website and see they have FAQ's?

i have a maximus S95 mobile . i want to connect internet using it as a modem. but i could'n. plz give me the communication driver

The software and the drivers found in the Internet work fine. However, everything works except java installation (failed to install java error). I fixed it changing the set up of the Tx and Rx cables inside the data cable. It´s quite easy. Hope this can solve your problems.