Question about Samsung Digimax S630 Digital Camera

1 Answer

Camera will not take picture, the flash just flash and that is it

And when I recorded the sound was not there

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 797 Answers

Make sure you have all the settings in the menus correct. You can set all to factory default, then pick what you want.
Try

Posted on Sep 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Black screen


Oh my Gosh, that the worst thing you could have done. please take up fishing or demolition our product is now damaged and will have to be repaired at a nikon service center they advise you futher.

Jan 22, 2014 | Nikon Coolpix S4300 16.0-Megapixel Digital...

1 Answer

How do i turn the flash off


Welcome to FixYa.

The FORCED OFF mode is the setting where flash is not activated in any recording condition. this mode used when taking pictures in places where the use of the flash is not permitted.

There are other 5 different mode/setting in using photo flash.

1. AUTO - flash automatically activated according to the recording condition.

2. AUTO/Red-eye reduction - flash is automatically activated according to the recording condition. It reduces the red-eye phenomenon by triggering the flash before actually recording the picture. After that, the flash is activated for actual recording again.

3. FORCED ON - use the when your subject is back-lit or under fluorescent light.

4. FORCED ON/Red-eye reduction - use this when you set the camera to PARTY MODE

5. Slow sync./Red-eye reduction - use this when you take pictures of people in front of a dark background.

I hope this solution will help you. Just send us you comments or suggestion if this solution was helpful.

Thank you for using FixYa.

Apr 08, 2011 | Panasonic Lumix DMC-FX8 Digital Camera

1 Answer

The camera takes pictures with flash, but then as you hit display the screen stays black and the picture was never taken. How can this get fixed?


Do you mean that no picture file was actually recorded, or do you really mean that the resulting picture file recorded a black picture?
If you mean that you're camera is taking black pictures, this sounds like a stuck shutter. A stuck shutter is a common failure mode for digital cameras, and it seems to be especially so for any of the Canon A6XX series (although these cameras are awesome otherwise). The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very bright and overexposed, especially when taken outdoors (for shutter stuck open). To confirm a stuck shutter, put the camera in any mode other than "Auto", and turn the flash OFF (you don't want to blind yourself for the next step). Next look down the lens and take a picture. You should see a tiny flicker in the center of the lens as the shutter opens and closes. If no movement is seen, then you likely have a stuck shutter. If so, please see this link for further info and a simple fix that may help.

Jun 28, 2010 | Canon PowerShot A620 Digital Camera

1 Answer

Vivitar vivicam 8225


The ViviCam does not record any audio with video.

The flash is intended to provide instantaneous illumination for still pictures. It does not provide continuous lighting for videos.

Jan 01, 2010 | Vivitar ViviCam 3350 Digital Camera

2 Answers

Camera flashes two times, but will not record a picture


this sounds like a problem with the sd card either being corrupt and needing formating or being to large. if made in 07 or older it takes 512 mb sd card max if in 08 or newer it will take up to a one gig sd card.

Oct 05, 2009 | Bushnell 11-9000 Digital Camera

1 Answer

When I try to record a motion picture there is no sound


audio recording is not available to all lumix. on dmc lz7, audio recording exists. if you don't get any sound when playing movie on your computer, try use a different video player or try install new audio/video codecs, espacially for mov/mp4 format

Jul 07, 2009 | Panasonic Lumix DMC-LZ7 Digital Camera

1 Answer

Can I record sound only through Camera sound inputs from Record


You might need a source picture from a camera or off the tv so that the DVD has some sync pulses to actually record the sound. Some won't do anything without any pictures.

Jan 30, 2009 | Philips DVDR70 DVD Recorder

1 Answer

Flash


Your camera is set at twilnight mode which has the flash suppressed and you won't be able to turn it on because of the fixed setting of twilnight mode to get the proper result of the picture. Due to the mode setting requirement, a shakey hand icon and no flash icon will show. If you press the flash mode button, it beeps. The twilnight setting has a low shutter speed, i.e. the shutter opens longer to allow more lights in, therefore it shows recording to let you know that the shutter is still open, and any moment of the camera will result in a blurred picture.
Now, check your camera mode dial and turn it back to the 'green' camera and see if you can get the flash to fire.

Jul 08, 2008 | Sony Cyber-shot DSC-W50 Digital Camera

1 Answer

Not taking pictures


The sensor sounds bad. The communication seems to have a too long of a delay. Meaning it is not snapping the shot as soon as the sensor goes off.

Jun 10, 2008 | Bushnell Trail Scout 11-9500c Digital...

1 Answer

Slow record time/goes into standby mode


Hi,

It sounds as if it is working mechanically, but there is a software fault.

Try downloading a new driver for it (or use the CD which you may still have)

They are available free Here.

(Please contact again if this does not solve the issue; If it does, Please rata as Fixya! so others may benefit. Thanks.)

Feb 16, 2008 | Nikon Coolpix 5600 Digital Camera

Not finding what you are looking for?
Samsung Digimax S630 Digital Camera Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Cameras Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

5062 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you a Samsung Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...